SOLICITATION NOTICE
59 -- Supplies
- Notice Date
- 8/31/2012
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- American Embassy, Kigali, 2657
- ZIP Code
- 00000
- Solicitation Number
- PR1912742
- Response Due
- 9/5/2012
- Archive Date
- 3/4/2013
- Point of Contact
- Name: Lysette Mananda, Title: Procurement Agent, Phone: 250252596400, Fax: +250596591
- E-Mail Address
-
manandal@state.gov;
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is PR1912742 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-60. The associated North American Industrial Classification System (NAICS) code for this procurement is 335999 with a small business size standard of 500.00 employees.This requirement is unrestricted and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2012-09-05 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be Linden, NJ 07036 The Department of State requires the following items, Meet or Exceed, to the following: LI 001, Plug Adaptor, Voltage 125V, Watts 1875, Color Black, Standards AMERICAN - GERMAN, 50, EA; LI 002, AC Adapter Kit, US to Euro, Input Voltage 100-240 VAC, Color White, For Use With Universal, 30, EA; LI 003, Long Nose Plier, Overall Length (In.) 8, Handle Color Black/Red, Type Long Nose, Side Cutter, Handle Type Ergonomic Dual Material Chemical Resistant Cushion Grip w/Thumb Stops, 10, SET; LI 004, Locking Plier, Curved Nose, Length 7 In, 6, EA; LI 005, Barrel Crimper, Application Crimps Barrel Connectors and Cuts Screws, Double D Crimper, 2, EA; LI 006, Hex Key Set, Ball End, Measurement Type SAE/Metric, Arm Type Long, Number of Pieces 22, Arm Length 2.80 to 6.80 In., Sizes Included 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 In., 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm, Blade Material Alloy steel, Handle Type L-Shaped, Meets/Exceeds ANSI B18.3 and Federal Specification GGG-K-275D, Includes Molded Plastic Holder, 5, SET; LI 007, Miniature Lamp, Trade Number 939, T5 Lamp Shape, Wedge Lamp Base, Primary Application Emergency Lighting, Voltage 6, 5.4 Amps/Watts, Average Life 50 hrs., Max. Overall Length 1.49 In., 5.4 Candle Power, Standards Meets 2012 Lighting Legislation Energy Standards, 50, EA; LI 008, Automatic Extension Ladder Leveler Kit, ANSI Standards, Used On Extension Ladders, Function Makes Extension Ladders, Aluminum, Aluminum, Includes 2 Spring Activated Levelers, For Use With Extension Ladders, Adjustable Up To Up to 8 1/2 In., Locks Spring Activated, Package Quantity 1, 2, EA; LI 009, Power Mixer w/Paddle, 2 Speed, 40 x 13 1/2 In, Metal Enclosed Electric Mixing Motor w/Steel Paddle Construction, Motor 110V, 1100 Watts, 1st Gear 180-460 RPM, 2nd Gear 300-700 RPM, For Mixing Mortar, Thinset, Grout, Paint and Other Viscous Materials, 1, EA; LI 010, ADA Plus Shower System, Wall Mount/Hand Held, Color/Finish Chrome/White, Material of Construction Brass, Connection 1/2 MNPT In, Max. Flow 2.5 GPM, Hose Length 59 In, Features 50 Spray Channels, ADA Compliant, Standards CSA B-125, ASME A112.18.1M, Includes Bracket, Vacuum Breaker, Hose, Showerhead And Grab Bar, 5, EA; LI 011, Two Piece Ball Valve, FNPT Connection, Max. Pressure 600 psi WOG, 150 psi WSP, Full Port, Material of Construction Brass, Seats PTFE, Stem Material Brass, Handle Lever, Standards UL, CSA, 10, EA; LI 012, Super Penetrant, Type Screwloose(R), Size 16 oz, Size/Net Weight 11 oz, Temp Range 32 to 300 F, Flash Point 112 F, VOC Content 404 g/L, Specific Gravity 0.8030, Film Type Non Drying, CO2 Propellant, Dissolves Rust, Varnishes, Gums, And Corrosion, Eases The Disassembly of Plant machinery, Tools and Equipement, Petroleum Base, NSF H2, 40, EA; LI 013, Soldering Flux, Paste, Working Range 1050 to 1600 Deg F, Specific Gravity 1.5 - 1.7, Container Type Plastic Bottle, Container Size 6.5 oz, For Silver Brazing Alloys on All Metals Other Than Aluminum, Magnesium or Titanium, Standards AMS 3410, 20, EA; LI 014, Lead Free Flux, Paste, Petroleum/Zinc Chloride, Working Range (Deg. F) 410 to 450, Specific Gravity 0.97, Container Type Plastic Tub, Container Size 16 oz., For Soldering Preparation, Standards NSF61, ASTM B 813, 20, EA; LI 015, Lead Free Solder, Contents 94 Percent Tin, 6 Percent Silver, Container Size 1 lb., Container Type Spool, For HVAC Soldering, ASTM B-32 Sn94 NSF61, 5, SPOOL; LI 016, Lead Free Solder Rosin Core, Contents 97 Percent Tin, 3 PercentCopper, Rosin, Container Size 1 oz., Container Type spool, Used For Speaker Wire, Motors, Appliances and General Wiring, ASTM B-32, 10, SPOOL; LI 017, Anchor, Self Drilling, Plastic, Screw Size #6 to #8, Anchor Length 1-1/4 In., Screw Length 1-1/4 In., Screw Type Phillips/Slotted, Grip Range 3/8 to 5/8 In., Min. Thread Length 1 1/4 In., Use With #6 Screws, Includes #6 x 1-1/4 In. Screw, Package Quantity 100, 50, PACKAGE; LI 018, Nylon Rope, Twisted, Rope Dia. 1/2 In., Length 300 ft., Working Load Limit 525 lb., Tensile Strength 5750 lb., Package Configuration Wood Reel, Color White, Standards Conforms to Cordage Institute, 3, REEL; LI 019, Nylon Rope, Twisted, Rope Dia. #18, Length 525 ft., Working Load Limit 27 lb., Tensile Strength 150 lb., Package Configuration Tube, Color Opti-Brite Yellow, 10, EA; LI 020, Manifold Gauge and Hose Set, Refrigeration Quick Charger, Number of Hoses 3, Number of Valves 3, For Use With R-410A, R-22, R-404A, Hose Length 60 In, Features Aluminum Manifold With Liquid Low Side Charger, Ports are Equipped With 120 Mesh Filters, Filter Connection May Be Cleaned and Rinsed In 91% Alcohol With O-Ring Removed, Hoses Are Rated at 800 PSI WP/4, 000 PSI RBP, Includes Manifold and 3 Hoses With Ball Valve Hose Shut Offs, 2, SET; LI 021, Thin Wall Heat Shrink Kit, Assortment of the above Tubes in a Reusable Container, 3, EA; LI 022, Heat Shrink Tube Kit, Color Red, Yellow, Green, Blue, White, Clear, Black, Outside Diameter "3/32", 1/8", 3/16", 1/4", 3/8", 1/2"", Cover Material Polyolefin, Type Thin Wall, 3, EA; LI 023, Needlenose Multitool, Type Full Size, Number of Tools 19, Number of Functions 21, Length Open (In.) 7, Closed Length (In.) 4-1/2, Stainless Steel, Needlenose Pliers, Hard Wire/Stranded Wire Cutters, Electrical Crimper, Smooth/Serrated Knives, Wood/Metal File, Saw, 5/16, 7/32, 1/8" Slotted, #2 Phillips Screwdrivers, Awl w/Thread Loop, Rule, Bottle/Can Openers, Wire Stripper, Lanyard Ring, Folding Handle, One-Hand Operation No, Locking Components, Inside Tool Access, Nylon Sheath, 60, EA; LI 024, Vinyl Tape Cartridge, Industrial Type, Black on Yellow, Tape Outdoor Vinyl, Tape Size 1.5 Inch x 30 Feet, Thickness.0005 Inch (0.125 mm), Permanent Label Type, B-580 Indoor/5-Year Outdoor Vinyl, With Aggressive Permanent Adhesive Material, Temperature Range -40 to 248 Deg F (-40 to 120 Deg C), For Use With ID Labeling Machine, Package Quantity 1 Roll, 5, ROLL; LI 025, Vinyl Tape Cartridge, Industrial Type, White on Blue, Tape Outdoor Vinyl, Tape Size 0.5 In x 30 Ft, Thickness.0005 In (0.125 mm), Permanent Label Type, B-580 Indoor/5-Year Outdoor Vinyl, With Aggressive Permanent Adhesive Material, Temperature Range -40 to 248 Deg F (-40 to 120 Deg C), For Use With ID Labeling Machine, Package Quantity 1 Roll, 5, ROLL; LI 026, Soldering Gun, Industrial, 300/200 Watts, Voltage 120, 2 Wire Cord, Trigger Control, 2 Wattage Positions, Standard Tip, 2, EA; LI 027, Desoldering Pump, One Hand Operation, 2, EA; LI 028, Chisel And Punch Set, Number of Pieces 14, Length 4 To 7 In, Material Forged And Heat Treated Carbon Tool Steel, Cuts Wrought Iron, Cast Iron, Steel, Brass, Bronze, Copper, Aluminum, Bolts, Nuts And Rivets, Includes Hand Cold Chisel 5/16, 3/8, 1/2, 5/8, 3/4 In, Flat Cape Chisel 1/2 In, Diamond Point Chisel 3/8 In, Center Punch 7/16 X 5 1/2 In, Prick Punch 3/8 X 5 In, 5 Pin Punches 5/16 X 5 In, 5/16 X 5 1/4 In, 5/16 X 5 1/2 In, 3/8 X 7 In And 1/2 X 7 In, Pouch, 1, EA; LI 029, Chalk Line Reel, Quick Retrieve, Line Length 100 Ft, Line Material Nylon/Polyester, Fill Weight 2 Oz, 6:1 Gear Ratio, Case Material Aluminum, Steel Folding Crank, 1/4-Turn Chalk Fill Cap, Steel Wide-Prong Hook, Easy Access Door Allows For Quick Line Changes And Cleaning, 1, EA; LI 030, Conventional Spray Gun, Very Low to High, Fluid Delivery Type Suction, Air Consumption 9.9 cfm @ 40 psi, Nozzle Size 0.063 In./1.5mm, Pattern Size 10 In., Cup Capacity 1 qt., Air Inlet 1/4 In., Fluid Delivery Speed Medium, 1, EA; LI 031, Wall Scraper, Blade Width 3 Inches, Handle Type Nylon, Stiff Blade, 4, EA; LI 032, Measuring Tape, Blade Length 25 Ft, Blade Width 1 In, Graduation Type In/Ft, Inches To 16ths, Standout 7 Ft, Stud Markings, Case Type Closed, ABS Plastic W/Rubber Molded Grip, Yellow/Black, Rewind Type Automatic, Handle Type Slip-resistant Rubber Grip, Blade Material Steel, Yellow, Automatic Bottom Lock, Belt Clip, 16 In and 19.2 In Stud Markings, 4, EA; LI 033, Rip Claw Hammer, Rip Claw, Head Weight 20 Oz., Overall Length 14 In., Steel w/Anti-Vibration Handle, Smooth Face, Face Dia. 1 3/8 In., Head Material Double Forged Steel, 4, EA; LI 034, Seam Roller, 3 1/2 In, Rugged Steel Frame, Solid Nylon Roller Construction, Reduces Pocking And Deformation Of Carpet Yarn, Large Handle, 3, EA; LI 035, Smoothing Brush, Smooth Surface, Block Size 12 x 3/4 In., Block Type Wood, Fill Type Tampico, Brush Length 12 In., Trim Length 2 In., Bristle Color Off White, For Use With Threaded or Tapered Handle, 10, EA; LI 036, Extension Ladder, D6200-2, Extended Ladder Height 32 Ft, Ladder Height 32 Ft, Max Working Length 29 Ft, Outside Shoe Base Width 19 In, Load Capacity 300 Lb, Fiberglass, Extra Heavy Duty, Dual action Shu-Lok, Rail Type Non-conductive, ANSI Type IA, 2, EA; LI 037, Disposable Gloves, Nitrile, Powdered, 4 mil, Length 9-1/2 In., Smooth Finish, Blue, Size XL, Unlined, Rolled Cuff, Special Features Low Modulus, Grade Industrial, Standards In Compliance 21 CFR, Parts 170-207, Resists Oil Based Chemicals, Oils, Fats And Bloodborne Pathogens, Package Quantity 100, 5, PACKAGE; LI 038, Manila Rope, Twisted, Rope Dia. 1 In., Length 600 ft., Working Load Limit 810 lb., Tensile Strength 8100 lb., Package Configuration Coil, Color Lt. Brown, 1, COIL; LI 039, Squeeze Type Non Insulated Flexible Conduit Connector, Conduit Size 1/2 Inch, NPT 1/2 Inch, Length 1 1 /16 Inches, Width 1 7/32 Inches, 17/32 Inches Minimum Cable Opening, 5/8 Inches Maximum Cable Opening, Material Malleable Ir, 50, EA; LI 040, Squeeze Type Non Insulated Flexible Conduit Connector, Conduit Size 3/4 Inch, NPT 3/4 Inch, Length 1 11/32 Inches, Width 1 7/32 Inches, 13/16 Inches Minimum Cable Opening, 15/16 Inches Maximum Cable Opening, Material Malleable Iron, 100, EA; LI 041, Squeeze Clamp 90 Degree Connector, Conduit Size 1/2 Inch, NPT 1/2 Inch, Material Die Cast Zin, 20, EA; LI 042, Squeeze Clamp 90 Degree Connector, Conduit Size 3/4 Inch, NPT 3/4 Inch, Material Die Cast Zinc, 20, EA; LI 043, Liquid Tight Conduit, Size 1/2 Inch, Trade Size 1/2 Inch, Length 100 Feet, Steel Core, UL Listed, 2, ROLL; LI 044, Liquid Tight Conduit, Size 3/4 Inch, Trade Size 3/4 Inch, Length 100 Feet, Steel Core, UL Listed, 2, ROLL; LI 045, Insulated Liquidtight Conduit Fitting, Conduit Size 1/2 Inch, Straight Connector, 10, EA; LI 046, Insulated Liquidtight Conduit Fitting, Conduit Size 3/4 Inch, Straight Connector, 20, EA; LI 047, Insulated Liquidtight Conduit Fitting, Conduit Size 1/2 Inch, 90 Degrees Connector, 10, EA; LI 048, Insulated Liquidtight Conduit Fitting, Conduit Size 3/4 Inch, 90 Degrees Connector, 10, EA; LI 049, One Hole Strap, Conduit Size 1/2 Inch, EMT Snap, 1.79 x 0.57 Inches, Steel, Package 100, 2, PACKAGE; LI 050, One Hole Strap, Conduit Size 3/4 Inch, EMT Snap, 1.96 x 0.62 Inches, Steel, Package 50, 4, PACKAGE; LI 051, One Hole Strap, Conduit Size 1 Inch, EMT Snap, 2.25 x 0.75 Inches, Steel, Package 50, 2, PACKAGE; LI 052, EMT Connector, Rain Tight, Insulated Compression, Conduit Size 3/4 In, Material of Construction Steel, Standards UL, 200, EA; LI 053, Switch Box, Capacity 12.5 Cubic Inches, Gangable, With Ears, Number of 1/2 Inch Side Knockouts 4, Number of 1/2 Inch End Knockouts 2, Number of 1/2 Inch Bottom Knockouts 2, Material Galvanized Zinc, Length 3 Inches, Width 2 Inches, Depth 2 1/2 Inch, 100, EA; LI 054, Industrial Grade Wall Switch, Toggle, Amps 20, Voltage 120/277, 1 Pole, Maintained, Color White, Back or Side Wiring, Rated HP 1, 20, EA; LI 055, Receptacle, Duplex, 20 Amps, NEMA Configuration 5-20R, Voltage 125, HP 1, Number of Poles 2, Number of Wires 3, Color White, Commercial Grade, Material of Construction Nylon, Back and Side Wired, Standards UL/ CSA, 100, EA; LI 056, Wall Plate, Number of Gangs 1, Plate Toggle Switch, Plate Material Stainless Steel, Brushed, 25, EA; LI 057, Wall Plate, Number of Gangs 2, Plate Toggle Switch, Plate Material Stainless Steel, Brushed, 10, EA; LI 058, Wall Plate, Number of Gangs 1, Plate Duplex Receptacle, Plate Material Stainless Steel, Brushed, 50, EA; LI 059, Wall Plate, Number of Gangs 2, Plate Duplex Receptacle, Plate Material Stainless Steel, Brushed, 25, EA; LI 060, Wall Plate, Duplex, Number of Gangs 2, Color Ivory, Finish Smooth, Material of Construction Nylon, Size Standard, 10, EA; LI 061, Disposable Gloves, Nitrile, Powdered, 4 mil, Length 9-1/2 In., Smooth Finish, Blue, Size XL, Unlined, Rolled Cuff, Special Features Low Modulus, Grade Industrial, Standards In Compliance 21 CFR, Parts 170-207, Resists Oil Based Chemicals, Oils, Fats And Bloodborne Pathogens, Package Quantity 100, 5, PACKAGE; LI 062, Manila Rope, Twisted, Rope Dia. 1 In., Length 600 ft., Working Load Limit 810 lb., Tensile Strength 8100 lb., Package Configuration Coil, Color Lt. Brown, 1, COIL; LI 063, Squeeze Type Non Insulated Flexible Conduit Connector, Conduit Size 3/4 Inch, NPT 3/4 Inch, Length 1 11/32 Inches, Width 1 7/32 Inches, 13/16 Inches Minimum Cable Opening, 15/16 Inches Maximum Cable Opening, Material Malleable Iron, 100, EA; LI 064, Drop-In Anchor, Non-Flange Type, Material Zinc Plated Steel, Anchor Dia 1/2 In, Thread Size 3/8-16, Thread Depth 1/2 In, Min Embedment 1 5/8 In, Ultimate Tension in 4000 PSI Concrete 3800 Lb, Ultimate Shear in 4000 PSI Concrete 3160 Lb, Drive Tools 3A498, Meets/Exceeds GSA Specifications FF-S-325, Group VIII, Type 1, Package 50, 4, PACKAGE; LI 065, Building Wire, Solid, Wire Gauge 10 AWG, Wire Type THHN, Voltage 600, Max. Amps 30, Temp. Rating 194 F, Color Black, Nominal Outside Dia. 0.15 In., Jacket Nylon, Insulation PVC, Spool Length 2500 Ft., Standards UL, 1, SPOOL; LI 066, Building Wire, Solid, Wire Gauge 10 AWG, Wire Type THHN, Voltage 600, Max. Amps 30, Temp. Rating 194 F, Color Green, Nominal Outside Dia. 0.15 In., Jacket Nylon, Insulation PVC, Spool Length 2500 Ft., Standards UL, 1, SPOOL; LI 067, Building Wire, Solid, Wire Gauge 10 AWG, Wire Type THHN, Voltage 600, Max. Amps 30, Temp. Rating 194 F, Color Orange, Nominal Outside Dia. 0.15 In., Jacket Nylon, Insulation PVC, Spool Length 2500 Ft., Standards UL, 1, SPOOL; LI 068, Building Wire, Solid, Wire Gauge 10 AWG, Wire Type THHN, Voltage 600, Max. Amps 30, Temp. Rating 194 F, Color White, Nominal Outside Dia. 0.15 In., Jacket Nylon, Insulation PVC, Spool Length 2500 Ft., Standards UL, 1, SPOOL; LI 069, Building Wire, Solid, Wire Gauge 10 AWG, Wire Type THHN, Voltage 600, Max. Amps 30, Temp. Rating 194 F, Color Yellow, Nominal Outside Dia. 0.15 In., Jacket Nylon, Insulation PVC, Spool Length 2500 Ft., Standards U, 1, SPOOL; LI 070, Building Wire, Solid, Wire Gauge 12 AWG, Wire Type THHN, Voltage 600, Max. Amps 20, Temp. Rating 194 F, Color Green, Nominal Outside Dia. 0.119 In., Jacket Nylon, Insulation PVC, Spool Length 2500 Ft., Standards UL, 2, SPOOL; LI 071, Building Wire, Solid, Wire Gauge 12 AWG, Wire Type THHN, Voltage 600, Max. Amps 20, Temp. Rating 194 F, Color Yellow, Nominal Outside Dia. 0.119 In., Jacket Nylon, Insulation PVC, Spool Length 2500 Ft., Standards UL, 2, SPOOL; LI 072, Building Wire, Solid, Wire Gauge 12 AWG, Wire Type THHN, Voltage 600, Max. Amps 20, Temp. Rating 194 F, Color White, Nominal Outside Dia. 0.119 In., Jacket Nylon, Insulation PVC, Spool Length 2500 Ft., Standards UL, 2, SPOOL; LI 073, Building Wire, Solid, Wire Gauge 12 AWG, Wire Type THHN, Voltage 600, Max. Amps 20, Temp. Rating 194 F, Color Brown, Nominal Outside Dia. 0.119 In., Jacket Nylon, Insulation PVC, Spool Length 2500 Ft., Standards UL, 2, SPOOL; LI 074, Building Wire, Solid, Wire Gauge 12 AWG, Wire Type THHN, Voltage 600, Max. Amps 20, Temp. Rating 194 F, Color Orange, Nominal Outside Dia. 0.119 In., Jacket Nylon, Insulation PVC, Spool Length 2500 Ft., Standards UL, 2, SPOOL; LI 075, Air Filter, Element/Outer, Length 29 1/2 In, Outside Dia 13 7/8 In, Inside Dia 17/32 In, For Use With PA2747, Includes Lift Tab, 12, EA; LI 076, Air Filter, Element/Inner, Length 28 1/4 In, Outside Dia 9 29/32 In, Inside Dia 17/32 In, For Use With PA274, 8, EA; LI 077, By-Pass Lube Filter, Spin-On, Length 9 15/16 In, Outside Dia 4 11/16 In, Thread Pitch 1 3/8-16, 12, EA; LI 078, Lube Filter, Spin-on, Length 11 9/32 In, Outside Dia 4 11/16 In, Thread Pitch 1 1/2-12, Includes Integral Post Seal. Only shipped in quantities of 6, 18, EA; LI 079, Drum Gauge, 5 Inch Length, Nonmetallic, Pop Up 3/4 Inch Bung, 1, EA; LI 080, Filter Cutter, 2, EA; LI 081, Infrared Thermometer, Temp. Range -20 Degrees to 932 Degrees F, Focus Spot Size and Distance 1 In. @ 10 In., Accuracy +/-2 Degrees F From 50 to 86 Degrees F, Spectral Response 6.5 to 18 uM, Laser Sighting 1 Dot, Response Time Less then 500 msec, Emissivity Fixed 0.95, Repeatability +/-3 Degrees F or +/-1.5 Percent, Display Backlit LCD, Max./Min. Max Reading Capture, Memory Recall Max, Ambient Temp. Range 32 Degrees to 120 Degrees F, Safety Rating Class II Laser, Battery Type 9V, 2, EA; LI 082, Accessory Kit, For Use With 2T597, 4GA30, 2MY35 Earth Ground Testers, Includes Red 300 Ft Color-Coded Lead On Spool, Blue 300 Ft Color-Coded Lead On Spool, Green 100 Ft Color-Coded Lead, Black 100 Ft Color-Coded Lead, Four 14.5 In T-shaped Auxiliary Ground Electrodes, Set Of Five Fork Terminals, 100 Ft Tape Measure And Soft Carrying Bag, 1, EA; LI 083, Clamp On Ammeter, Digital, 400 Amps AC, Voltage 600 AC, Voltage 600 DC, Calibration Frequency 50 to 400 Hz, Auto Ranging, LCD, +/-1.8% +/- 5 Counts AC Current Accuracy, CAT III 600V Safety Rating, Includes Soft Carrying Case, Test Leads, 2 Batteries and Instructions, 1, EA; LI 084, Multimeter and Voltage Tester, Includes Fluke 179 Digital Multimeter (6MR09), 1AC-II Non-Contact Voltage Detector (2KU25), C35 Soft Case, AC220 Alligator Clips (3MU82), TP220 Test Probes (3MU87), TL224 Silicone Test Leads (3MU86), TPAK Magnetic Hanging Kit (4XL48), 80BK Integrated Temperature Probe (4YV55), 1, EA; LI 085, Direct Drive Blower Motor, Split Phase, Open Dripproof, HP 1/4, RPM 1725/1425, Voltage 110/220 V, NEMA Frame 48, Service Factor 1.00, Frequency 60/50 Hz, Mounting Rigid, Bearings Double Shielded Ball, Thermal Protection Auto, Full Load Amps 4.4/2.2, CE Approval, 2, EA; LI 086, Hex Key Set, Measurement Type SAE, Number of Pieces 6, Arm Length 4.20 to 5.10 In., Sizes Included 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 In., Blade Material Alloy steel, Handle Type Fold-Up, Ergonomic, Meets/Exceeds ANSI B18.3 and Federal Specification GGG-K-275D, 3, EA; LI 087, Industrial Thermometer, Temp Range 0 to 160 F, Scale Divisions 2 Degrees, Insertion Length 2.5 In, Stem Length 3.5 In, Stem Dia 0.433 In, Connection Size 1 1/4-18, Connection Style Lower, Variable Angle, Fill Non-Toxic Blue Liquid, Accuracy +/-1%, Case Material Aluminum, Case Color Black, Scale Material Aluminum, Scale Color White with Black Numbers, Window Material Glass, Includes Instructions, 5, EA; LI 088, Tube Bender, One-Handed Ratchet, Outside Dia Tubing 3/8, 1/2, 5/8, 3/4, 7/8 In, Centerline Bend Radius 1 3/16 For 3/8 OD, 1 3/8 For 1/2 OD, 1 15/16 For 5/8 OD, 2 15/16 For 3/4 OD, 3 3/8 For 7/8 OD, Bend Angle Up To 90 Deg, Index marks, Handle Type Long, Non-cushioned, Die Cast Aluminum, Open Bending Frame, Mechanical Ratchet Feed, Soft Copper, Aluminum And Light Wall Hydraulic Tubing, 1, EA; LI 089, Midget Tube Cutter, Capacity 1/8 to 5/8 Inch, Overall Length 2 1/8 Inches, Not for Stainless Steel, 1, EA; LI 090, Flaring/Cutting Kit, Capacity Tubing OD 3/16 to 5/8 Inch, Overall Length 6 1/4 Inches, With Case, 1, EA; LI 091, Building Wire, Solid, Wire Gauge 10 AWG, Wire Type THHN, Voltage 600, Max. Amps 30, Temp. Rating 194 F, Color Brown, Nominal Outside Dia. 0.15 In., Jacket Nylon, Insulation PVC, Spool Length 2500 Ft., Standards UL, 1, ROLL; LI 092, Pressure Gauge, Dial Size (In.) 2, Range 0 to 100 psi, 0 to 700 kPa, Dial Size (mm) 50, Connection Size 1/4" NPT, Connection Location Lower, Smallest Graduation (PSI) 2, Accuracy (%) +/-3-2-3, Case Material ABS Plastic, Case Color Black, Socket Material Brass, Tube Material Bronze, Lens Material Acrylic, Ring Material Crimped Stainless Steel, Operating Temp. Range (F) -40 Degrees to 150 Degrees, Manufacturers Warranty Length 1 Year, 6, EA; LI 093, Vacuum Pump Oil, Size 1 Liter, For Use With Corrosive Gas Applications, 5, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Department of State is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. If Seller is bidding Cisco brand equipment, Seller certifies that it is a Cisco Authorized Channel as of the date of the submission of its Bid, and that it has the certification/specialization level required by Cisco to support both the product sale and product pricing, in accordance with applicable Cisco certification/specialization requirements.Unless otherwise specified, Seller warrants that the products are new and in their original box(es). The Seller confirms to have sourced all Cisco products submitted in this Bid from Cisco or through Cisco Authorized Channels only, in accordance with all applicable laws and Cisco?s current applicable policies at the time of purchase. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all Cisco software is licensed originally to Buyer as the original licensee authorized to use the Cisco Software. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/State/FedBid.com/FedBid1/PR1912742/listing.html)
- Place of Performance
- Address: Linden, NJ 07036
- Zip Code: 07036
- Zip Code: 07036
- Record
- SN02865529-W 20120902/120901001112-1d4050a6fc0225a672dc05d4ddbb93a8 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |