SOLICITATION NOTICE
28 -- OEM OVERHAUL PEILSTICK PROPULSION DIESEL ENGINES PARTS FOR T-AO CLASS VESSELS - PART LIST
- Notice Date
- 9/23/2012
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333618
— Other Engine Equipment Manufacturing
- Contracting Office
- Department of the Navy, Military Sealift Command, MSFSC Norfolk, Building SP-64, 471 East C Street, Norfolk, Virginia, 23511, United States
- ZIP Code
- 23511
- Solicitation Number
- N40442-12-R-1023
- Archive Date
- 9/30/2013
- Point of Contact
- Henry Bijak, Phone: 757 443 5959, Linda O. Terry, Phone: 7574435918
- E-Mail Address
-
Henry.Bijak@navy.mil, linda.o.terry@navy.mil
(Henry.Bijak@navy.mil, linda.o.terry@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- PART LIST COMBINED SYNOPSIS/SOLICITATION This is a combined synopsis/solicitation for commercial items prepared in accordance with the format prescribed in Subpart 12.6 of the Federal Acquisition Regulation (FAR), as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is N40442-12-R-1023, and it is being issued as a request for proposals (RFP). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-61, effective 13 September 2012. This procurement is not being conducted as small business set-aside; NAICS code 333618 with a standard of 1000 applies. Military Sealift Command (MSC) - Norfolk, Norfolk, VA intends to award a firm fixed price purchase order for Original Equipment Manufacturer (OEM) parts for the USNS GUADALUPE (T-AO) for the following parts : Original equipment manufacturer (OEM) parts are required. Any offer for other than OEM parts will not be considered. (SEE ATTACHED PARTS LIST OF 322 LINE ITEMS.) Shipping address for this item is MSC San Diego Warehouse, 9284 Balboa Ave, San Diego, CA 92123. The contractor will provide the goods FOB Destination. The required delivery date for the above items is March 01, 2014. Please provide the cost of shipping charges if applicable. The following FAR and DFARS provisions and clauses apply to this solicitation and are incorporated by reference: 52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber Content Paper 52.212-1 Instructions to Offerors-Commercial Items 52.212-3 Alt I Offerors Representations and Certifications-Commercial Items - (Offerors are advised to include a completed copy of this provision with their quote or a statement stating that it is available via the SAM website https://www.sam.gov/portal/public/SAM/) 52.212-4 Contract Terms and Conditions-Commercial Items 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items Clauses within 52.212-5 are hereby incorporated: 52.203-6 Restrictions on Subcontractor Sales to the Government 52.204-10 Reporting Subcontract Awards 52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.219-8 Utilization of Small Business Concerns 52.219-28 Post-Award Small Business Program Rerepresentation 52.222-3 Convict Labor 52.222-19 Child Labor - Cooperation with Authorities and Remedies 52.222-21 Prohibition of Segregated Facilities 52.222-26 Equal Opportunity 52.222-35 Equal Opportunity for Veterans 52.222-36 Affirmative Action for Workers with Disabilities 52.222-37 Employment Reports on Special Disabled Veterans of the Vietnam Era, and Eligible Veterans 52.222-40 Notification of Employee Rights Under the National Labor Relations Act. 52.223-18 Contractor Policy to Ban Text Messaging while Driving 52.225-13 Restrictions on Certain Foreign Purchases 52.232-33 Payment by Electronic Funds Transfer- Central Contractor Registration 52.232-99 Accelerated payments to Small Business (DEVIATION) 52.222-22 Previous Contracts and Compliance Reports 52.222-25 Affirmative Action Compliance 52.242-13 Bankruptcy 52.247-34 F.o.b. Destination 252.204-7000 Disclosure of Information 252.204-7004 Required Central Contractor Registration (Alternate A) 252.209-7001 Disclosure of ownership or control by the government of a terrorist country 252.211-7003 Item Identification and Valuation 252.212-7000 Offeror representations and certifications -Commercial items (Offerors are advised to include a completed copy of this provision with their quote or a statement stating that it is available via the SAM website) 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items Clauses within 252.212-7001 are hereby incorporated: 52.203-3 Gratuities 252.203-7000 Requirements Relating to Compensation of Former DoD Officials 252.225-7001 Buy American Act and Balance of Payments Program 252.225-7009 Restriction on Acquisition of Certain Articles Containing Specialty Metals 252.225-7012 Preference for Certain Domestic Commodities 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports 252.247-7023 Transportation of Supplies by Sea. 252.225-7000 Buy American Act and Balance of Payment Program Certificate The following FAR and DFARS provisions and clauses apply to this solicitation and are incorporated by full text: 52.212-1 (ADDENDUM) Additional Instructions to Offerors-Commercial Items 1. General Instructions Offerors shall submit proposal: Technical Proposal Price Proposal Technical Proposals Technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary. Technical acceptability will be determined by the offerors availability to provide OEM parts. Award will be made for all parts. Price and Other Business Considerations 1. A separate unit price and extended price must be submitted for each line item in above table. 2. Terms of any express warranty. 3. Any discount terms. 4. A completed copy of the representations and certifications at FAR 52.212-3 Alternate I and DFARS 252.212-7000 or a statement stating that they are available via the SAM website, https://www.sam.gov/portal/public/SAM/. 5. Remittance address, Tax Identification Number, DUNS number and Cage Code. 6. Offeror shall state expected delivery date of 01 March 2014. 7. Responses to this combined synopsis/solicitation are due 25 October 2012 at 1400 EST, Norfolk, VA. LATE PROPOSALS MAY NOT BE CONSIDERED FOR EVALUATION. Proposals may be e-mailed to Henry. bijak@navy.mil - Attn: Henry Bijak. Please reference the solicitation number on your proposal. Past Performance will be waived. (End of Addendum) 52.212-2 -- Evaluation -- Commercial Items (JAN 1999). (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation that is determined to be the lowest evaluated price of offers meeting or exceeding the acceptability standards for non-cost factors. The following factors shall be used to evaluate offers: Technical Price (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of Provision) 52.233-2 Service of Protest a) Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt from Henry Bijak, Contract Specialist Supervisor, N104-1, Bldg SP-64, 471 East C Street, Norfolk, VA. 23511. (b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO. (End of Provision) 52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address (es): http://www.arnet.gov/far. (End of Provision) 52.252-2 Clauses Incorporated by Reference (FEB 1998) This contract incorporates one or more clauses by reference with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address (es): http://www.arnet.gov/far. (End of Provision) 52.252-6 Authorized Deviations in Clauses. As prescribed in 52.107 (f), insert the following clause in solicitations and contracts that include any FAR or supplemental clause with an authorized deviation. Whenever any FAR or supplemental clause is used with an authorized deviation, the contracting officer shall identify it by the same number, title, and date assigned to the clause when it is used without deviation, include regulation name for any supplemental clause, except that the contracting officer shall insert "(DEVIATION)" after the date of the clause. Authorized Deviations in Clauses (Apr 1984) (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any _____. [insert regulation name] (48 CFR _____) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of clause) WOOD PACKAGING MATERIAL (WPM) - ADDITIONAL DELIVERY INSTRUCTIONS: In accordance with the requirements of International Standards for Phytosanitary Measures (ISPM) 15, the following commercial heat treatment process has been approved by the American Lumber Standards Committee (ALSC) and is required for all Wood Packaging Material (WPM). WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frames, and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process such as corrugated fiberboard, plywood, particleboard, veneer and oriented strand board. All WPM shall be constructed from Heat Treated (HT to 56 degrees Centigrade for 30 minutes) lumber and certified by an accredited agency recognized by the ALSC in accordance with Wood Packaging Material Policy and Wood Packaging Material Enforcement Regulations (see URL: http://www.alsc.org). All materials must include certification markings in accordance with ALSC standards and be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides and ends of the pallet and be contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ALSC approved "DUNNAGE" stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. (End of instructions) SHIP & BASE ACCESS (SEP 2011) Vendors are responsible for correctly submitting forms/applications. Vendors are encouraged to monitor email using "Request a Read Receipt" function and to confirm receipt of facsimile transmissions. Due to enhanced security measures, ship and base access is required for pre-award ship visits (e.g. ship-check) and for contract performance. Specifically the following permissions are required: 1. El Paso Intelligence Center (EPIC) personnel screening requirement 2. Base/Repair Facility Access Request 3. Vehicle Access Request 4. Ship Access List (vendor-provided) All forms are available for download on the MSC contracts webpage at http://www.msc.navy.mil. Click on "Contracts" in the upper right corner. "EPIC template" is under "Reference" subheading. Click on "Online Library of Common Documents" for all other forms. EPIC: Required for access to MSC vessels. Complete EPIC form strictly adhering to format requirements and forward to (CONUS East Coast repairs) MSFSC(underscore)EPIC(underscore)EAST@navy.mil and (CONUS West Coast and HI repairs) MSC.SSUSD.EPIC@NAVY.MIL. EPIC personnel screening requests are desired seven calendar days prior to performance start date. Requests will be managed as expeditiously as circumstances permit. Vendor will be notified by MSFSC of personnel who are denied access to the vessel. Base/Repair Facility Access: Permit is required to access Navy facilities. Base/Repair Facility Access Request is desired seven days prior to ship check or performance start date. Submit forms per the document instruction and to the Port Engineer. A courtesy copy (CONUS West Coast performance locations only) to Ermanno Magliulo, Engineering Director, at ermanno.magliulo@navy.mil will be appreciated. RAPIDGate® is being implemented for access to DoD facilities in CONUS, HI, Guam and Puerto Rico. Vendor is responsible to acquire RAPIDGate® status and destination base individual access badge(s) activation prior to performance start date. Delays that may result from inadequate planning are contractor responsibility. Vendor instructions and program information is available at http://www.RAPIDGate.com or tel. 877.727.4342. RAPIDGate® access requires (in succession) (1) Individual Base Commander approval for vendor to access base, (2) Successful vendor RAPIDGate® company annual enrollment, (3) Company employee individual enrollment and possession of RAPIDGate® identification badge for single base or multiple base (enterprise) access. Vendor is responsible to confirm that each employee held annual RAPIDGate® badge is active for the specific facility and performance period in accordance with RAPIDGate® User Agreement (http://www.RAPIDGate.com). Additional access permissions may be required such as Navy Base Point Loma "Enclave Access request form". Vehicle Access: Required for vehicle access to Navy facilities. Follow supplemental instructions on Base Access forms or base-specific vehicle access forms. Ship Access List* (Vendor-Provided): On company letterhead attachment via email, the vendor is required to provide the ship master (courtesy copy the Port Engineer) with an accurate, current list of performing personnel prior to being admitted aboard the vessel. Under no circumstances will a hand-delivered list be accepted. (End of instructions) 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JUN 2012) (a) Definitions. As used in this clause-- Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization. Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall-- (1) Have a designated electronic business point of contact in the Central Contractor Registration at https://www.acquisition.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site. (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the ``Web Based Training'' link on the WAWF home page at https://wawf.eb.mil/. (e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order: (1) Document type. The Contractor shall use the following document type(s). Invoice (2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer. Not applicable (3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Routing Data Table* ------------------------------------------------------------------------ Field Name in WAWF Data to be entered in WAWF ------------------------------------------------------------------------ Pay Official DoDAAC Issue By DoDAAC Admin DoDAAC Inspect By DoDAAC Ship To Code Ship From Code Mark For Code Service Approver (DoDAAC) Service Acceptor (DoDAAC) Accept at Other DoDAAC LPO DoDAAC DCAA Auditor DoDAAC Other DoDAAC(s) ------------------------------------------------------------------------ (4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and sub-line item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request. (5) WAWF email notifications. The Contractor shall enter the email address identified below in the ``Send Additional Email Notifications'' field of WAWF once a document is submitted in the system. Not applicable (g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact. Not applicable (2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988. (End of clause) MSC SPECIFIC WIDE AREA WORKFLOW (WAWF) INSTRUCTIONS (AUG 2012) The information contained in this instruction is supplemental to DFARS 252.232-7006. The information contained in the table in DFARS 252.232-7006 is for WAWF purposes only. Information included in DFARS 252.232-7006 and this WAWF instruction applies only to WAWF Invoicing and WAWF Receiving Reports. Contradictory information elsewhere in this contract, e.g. Ship to DoDAAC, shall be followed per the terms and conditions of the contract. When entering the invoice into WAWF, the Contractor shall fill in the DoDAAC fields or DoDAAC extensions exactly as shown in the table in DFARS 252.232-7006. Fields that should not be filled in when entering the invoice into WAWF will be indicated with the direction, "Leave Blank." In some situations the WAWF system will pre-populate the "Pay DoDAAC," "Admin By DoDAAC" and "Issue By DoDAAC." The Contractor shall verify that those DoDAACs automatically entered by the WAWF system match the information in the table in DFARS 252.232-7006. If these DoDAACs do not match, then the Contractor shall correct the field(s). If Receiving Reports are required, ensure that the "Inspection" and "Acceptance" defaults of "destination" for both fields are not changed in the WAWF online interface. The CLINs on the WAWF invoice shall be entered exactly as set forth in the contract document including CLIN number (e.g. 0001), Quantity (may be adjusted for actual quantity or dollar value delivered and invoiced), and Unit Price (e.g. $1.00). The dollar amounts on each CLIN or SubCLIN on the WAWF invoice shall reflect final performance values, but in no instance can the dollar amount for each CLIN or SubCLIN exceed what is specified in the contract document. The Contractor shall bill to the lowest level, e.g., the SubCLIN level. The Quantity and Unit of Measure fields must be filled out exactly as indicated in the CLINs and SubCLINs to reduce the possibility of the invoice being delayed or rejected during processing. Before closing out of an invoice session in WAWF, but after submitting the document or documents, the Contractor will be given the option to send additional email notifications by clicking on the "Send More Email Notifications" link that appears on the page. The Contractor shall click on this link and add the Technical Point of Contact's (TPOC) or Contracting Officer's Representative's (COR) email address in the first email address block and add any other additional email addresses desired in the following blocks. This additional notification to the Government is important to ensure the acceptor/receiver is aware that the invoice documents have been submitted into the WAWF system. (End of instructions)
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/ecc1033b78b9b28c3cdb50144d01f140)
- Place of Performance
- Address: SAN DIEGO CA WAREHOUSE, SAN DIEGO, California, 92123, United States
- Zip Code: 92123
- Zip Code: 92123
- Record
- SN02895444-W 20120925/120923233708-ecc1033b78b9b28c3cdb50144d01f140 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |