MODIFICATION
51 -- Tools
- Notice Date
- 9/25/2012
- Notice Type
- Modification/Amendment
- Contracting Office
- 101 Bloxon St, Fort Myer, VA 22211
- ZIP Code
- 22211
- Solicitation Number
- W91QF7-12-T-0104-0001
- Response Due
- 9/25/2012
- Archive Date
- 3/24/2013
- Point of Contact
- Name: Client Services, Title: Client Services, Phone: 1.877.933.3243, Fax: 703.422.7822
- E-Mail Address
-
Clientservices@fedbid.com;
- Small Business Set-Aside
- Total Small Business
- Description
- AMENDMENT NOTICE:This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice.The solicitation number is W91QF7-12-T-0104-0001 and is issued as an invitation for bids (IFB), unless otherwise indicated herein.The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-60. The associated North American Industrial Classification System (NAICS) code for this procurement is 332212 with a small business size standard of 500.00 employees.This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids.The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2012-09-25 15:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com.FOB Destination shall be FORT MYER, VA 22211 The MCO Belvoir - ICO Joint Base Myer Henderson Hall requires the following items, Brand Name or Equal, to the following: LI 001, 18V CORDLESS 1/2IN DRIVE IMPACT WRENCH KIT, DeWalt; DCF059KI, 4, EA; LI 002, BIT MASONRY, Carbide-tipped, straight shank, DeWalt; SIZE 1/4 dia x 6" LENGTH; pt # 4KZ97, 10, EA; LI 003, BIT MASONRY, Carbide-tipped, straight shank, DeWalt; SIZE 1/4 dia x 12" LENGTH; pt # 4KZ98, 5, EA; LI 004, BIT MASONRY, Carbide-tipped, straight shank, DeWalt; SIZE 5/16 dia x 6" Length; PT # 4KZ99, 10, EA; LI 005, BIT MASONRY, Carbide-tipped, straight shank, DeWalt; SIZE 5/16 dia x 12" Length; PT # 4LC01, 5, EA; LI 006, BIT MASONRY, Carbide-tipped, straight shank, DeWalt; SIZE 3/8 dia x 6" Length; PT # 4LC02, 5, EA; LI 007, BIT MASONRY, Carbide-tipped, straight shank, DeWalt; SIZE 1/8 dia X 3" Length; pt # 4KZ93, 10, EA; LI 008, BIT MASONRY, Carbide-tipped, straight shank, DeWalt; SIZE 5/32 dia X 3" Length; pt # 4PC44, 10, EA; LI 009, BIT MASONRY, Carbide-tipped, straight shank, DeWalt; SIZE 5/32 dia X 6" Length; pt # 4PC23, 10, EA; LI 010, BIT MASONRY, Carbide-tipped, straight shank, DeWalt;SIZE 3/16 dia X 6" Length; pt # 4KZ95, 10, EA; LI 011, BIT MASONRY, Carbide-tipped, straight shank, DeWalt; SIZE 3/16 dia X 3" Length; pt # 4KZ94, 10, EA; LI 012, BIT MASONRY, Carbide-tipped, straight shank, DeWalt; SIZE 1/4 dia X 4" Length; pt # 4KZ96, 10, EA; LI 013, INDEX, DRILL BIT CASE, JOBBER LENGTH, holds 1/16" 1/2 " fractions in 64ths 29 compartments, drill bits not included. pt # 4EJ43, 10, EA; LI 014, VACUUM PORTABLE, WET/DRY, 5GAL Heavy Duty, Poly Tank, Dayton, 5.5 hp., pt # 1VHF8, 5, EA; LI 015, Tool, ONE-WAY DRIVE REMOVAL TOOL, 7" LONG, FOR SCREW SIZES #6 & #8, pt # 1ZLA3, 5, EA; LI 016, Tool, ONE-WAY DRIVE REMOVAL TOOL, 7" LONG, FOR SCREW SIZES #8 & #10, pt # 1ZLA6, 5, EA; LI 017, BITS TAMPERPROOF, 3PC DOUBLE-END, SPANNER #6, 8, 10, &12, STAR PIN T10 & T15, PT # 5PA39, 5, EA; LI 018, SCREWDRIVER SET, MAGNETIC MULTI-BIT RATCHETING, 10 PIECE, PT # 6XW12, 5, EA; LI 019, SCREWDRIVER, MULTI-BIT, 6 IN 1 WESTWARD, PT # 1CLP2, 10, EA; LI 020, SCREWDRIVER, MULTI-BIT, TAPERPROOF, 15 IN 1, MEGA-PRO, PT # 5PA34, 5, EA; LI 021, EXTRACTOR SET, SCREW, SPIRAL 5-PC, INCLUDES #1 THRU #5, NATIONAL, PT # EW50-S35P, 10, EA; LI 022, EXTRACTOR/DRILL SET, SCREW EXTRACTORS #1 THRU #5, 5 LEFT-HAND DRILL BITS, PT # EW51-1119, 3, EA; LI 023, GENERAL HAND HELD DRAIN SNAKE-- MARCO 5/16" X 25' HAND HELD SNAKE, 1, EA; LI 024, WIRE TOTE WHEELED CAPACITY 120LB, GRAINGER ITEM # ITCY5, 1, EA; LI 025, POWER FISHING SYSTEM ACCESSORY KIT, GRAINGER ITEM #4CN25, 1, EA; LI 026, SCREWDRIVER/NUT DRIVER, 11-IN-1, GRAINGER ITEM #2RK2Y, 20, EA; LI 027, DIAGONAL CUT PLIERS, 8", ANGLED, GRAINGER ITEM #3LY20, 4, EA; LI 028, KEIN TOOLS SIDE CUT PLIERS 9", HD, GRAINGER ITEM #3LY16, 4, EA; LI 029, KEIN TOOLS WIRE STRIPPER 7 1/8, GRAINGER ITEM #3PB81, 4, EA; LI 030, KEIN TOOLS LONG NOSE PLIER W/CUTTER, 8", GRAINGER ITEM #3LY17, 4, EA; LI 031, DEWALT SCREWDRIVING BIT SET 45PC MODEL # DW2145, 10, EA; LI 032, DEWALT SCREWDRIVING BIT SET 29PC MODEL # DW341008, 8, EA; LI 033, LENOX BIMETAL HOLE SAW KIT 13PC M1786647, 4, EA; LI 034, IRWIN SPEEDBOR PRO DRILL BS 8PC M1786647, 10, EA; LI 035, GREENLEE VACUUM BLOWR MRF#390 PT#4CN23, 1, EA; LI 036, 03489212 TE-60 ATC PERFORMANCE PACKAGE, 1, EA; LI 037, 03476238 TE7A PERFORMANCE PACKAGE, 1, EA; LI 038, 5LUP2 DEWALT DR CIRCULAR 7-1/4 4800RPM, 1, EA; LI 039, 3JT63 SPEEDAIRE HOSE AIR 1/4X1/4 NPT 25, 2, EA; LI 040, 1HLZ9 LEGACY COUPLER PLUG 1/4" BODY IND, 10, EA; LI 041, 2HNW7 RAMSET POWER ACTUATED GUN SA 27CAL, 1, EA; LI 042, 2HPA3 RAMSET LOAD RED 27 CALIBER, 3, EA; LI 043, 2HPA2 RAMSET LOAD YELLOW 27 CALIBER, 3, EA; LI 044, 2HPA2 RAMSET LOAD YELLOW 27 CALIBER, 3, EA; LI 045, 2HPA3 RAMSET FASTNER PIN 1-1/2", 2, EA; LI 046, 2HNY1 RAMSET FASTNER PIN 1", 2, EA; LI 047, 2UV90 STANLEY BOSTITCH PNEUMATIC NAILER, 1, EA; LI 048, 2UV98 STANLEY BOSTITCH FRA NAILS 1-1/2", 1, EA; LI 049, 2UV99 STANLEY BOSTITCH FRA NAILS 2-1/2", 1, EA; LI 050, 4Z782 STANLEY BOSTITCH ROOFNG COIL NAILR, 1, EA; LI 051, 5W012 STANLEY BOSTITCH ROOFING NAILS, 1, EA; LI 052, 1WXN1 DEWALT CORDLESS FINISH NAILER, 1, EA; LI 053, KLEIN TORPEDO LEVEL/MAGNETIC MFG#931-9RE, 4, EA; LI 054, STANLEY JAB SAW 6" BALDE MFR#20-556, 6, EA; LI 055, KLEIN CONDUIT REAMING SCREWDRVR #85191, 4, EA; LI 056, KLEIN OFFSET SCREWDRVR SET MFR#210122, 6, EA; LI 057, KLEIN SCREWDRVR PHILLIPS 1X3 MFR#6033INS, 4, EA; LI 058, KLEIN SCREWDRVR PHILLIPS 5/16X6 M6026INS, 4, EA; LI 059, KLEIN SCREWDRVR PHILLIPS 3/16X6 M6016INS, 4, EA; LI 060, Klein Cable Cutter Journeyman s/9 J63050, 4, EA; LI 061, Channel Lock pliers/Tongue-Groove/16/460, 6, EA; LI 062, Channel Lock pliers/Tongue-Groove/16/440, 10, EA; LI 063, Crescent Adjustble wrench/6/Cushn AC16CV, 6, EA; LI 064, Crescent Adjustble wrench/8/Cushn AC18CV, 6, EA; LI 065, Fluke Electr Tester/Display LCD T-Pro, 4, EA; LI 066, Klein Hacksaw/MFR# 701-S, 4, EA; LI 067, Klein Screwdrivr set/2pc/stubby/MFR85071, 4, EA; LI 068, Klein Screwdrivr set/2pc/insulated/33532, 4, EA; LI 069, Gen Tools Screwstarter crosspoint #8083, 4, EA; LI 070, Vaco screwdrivr set/screw holding/#SK234, 4, EA; LI 071, SLC Tool Punch/21 pocket/black/MFR# 1509, 4, EA; LI 072, Greenly Fish Tape/Steel/125'/#FTS438-125, 4, EA; LI 073, Westward Jumpstartr/Boostr/250Amp #1YMN2, 1, EA; LI 074, Drill Bit HS Steel/Morse KUT3/32"/#11395, 2, EA; LI 075, Drill Bit HS Steel/Morse KUT7/64"/#11402, 2, EA; LI 076, Drill Bit HS Steel/Morse KUT#30 / #11409, 4, EA; LI 077, Drill Bit HS Steel/Morse KUT1/8"/#11409, 2, EA; LI 078, Drill Bit HS Steel/Morse KUT5/32"/#11418, 2, EA; LI 079, drill Bit HS Steel/Morse KUT3/16"/#11430, 2, EA; LI 080, Extractor set/screw/spiral/5pc #EW50S35P, 10, EA; LI 081, Extractor Drill set screw #EW51-1119, 3, EA; LI 082, Set round/mill/square files, FT407275932, 10, EA; LI 083, Countersink, 3/8x1/4x1-3/4, #AC90RFC0482, 5, EA; LI 084, Countersink, 1/4x1/4x1-1/2,#AC90-RFC0682, 5, EA; LI 085, Countersink, 5/8x3/8x2-1/4,#AC90-RFC1082, 5, EA; LI 086, Screwdvr/slottd,1/4"round,6"shank,#2RDP9, 5, EA; LI 087, Screwdvr/slotted,5/16"rnd,6"shank,#2RDR2, 5, EA; LI 088, Screwdvr/phillips,#2 tip,4"shank,#2RDW2, 5, EA; LI 089, Screwdvr/phillips,#2 tip, 8"shank, 5, EA; LI 090, Screwdrivr set/multi-bit/7-in-1/#1CLP4, 10, EA; LI 091, Screwdrivr set/multi-bit/11-in-1/#2RTK1, 10, EA; LI 092, 18V 1/2 DRIVE IMPACT WRENCH KIT, 4, EA; LI 093, VACUUM PUMP 7-CFM (REFRIGERATION), 4, EA; LI 094, RERFRIGERQATNT RECOVERY MACHINE, 4, EA; LI 095, RATCHET REVERSABLE WRENCH KIT, 12, EA; LI 096, FISH TAPE REEL, 6, EA; LI 097, INFARED THERMOMETER, 4, EA; LI 098, MULTI METER INDUSTRIAL COMBO KIT, 6, EA; LI 099, VOLT ALERT VOLT DETECTER, 5, EA; LI 100, FREON SCALE COMPACT HIGH CAPACITY, 4, EA; LI 101, VACUUM/CHARGE VALVE&CORE TOOLS, 4, EA; LI 102, TORCH SELF LIGHTING, 6, EA; LI 103, TUBING CUTTER MIDGET SELF FEEDING, 6, EA; LI 104, MINICUTTER HEAVY DUTY (PLUMBING), 6, EA; LI 105, CAPACITOR TESTER MFD-10, 6, EA; LI 106, CHARGING & MANIFILD TESTER, 6, EA; LI 107, PULLER ULTIMATE PULLER, 4, EA; LI 108, ANALYZER HERMETIC COMPRESSOR, 4, EA; LI 109, REFRIGERANT LEAK DETECTOR, 4, EA; LI 110, COMBUSTABLE GAS LEAK DETECTOR, 4, EA; LI 111, REFRIGERANT GAUGES R-134 R-507 R-404, 6, EA; LI 112, REFRIGERANT GAUGES R-22 R410 R404A, 6, EA; LI 113, PLASMA CUTTER 240-V 3/8-5/8 CUT, 1, EA; LI 114, DRAIN CLEANER MACHINE K-50, 1, EA; LI 115, JACKHAMMER/PAVEMENT BREAKER KIT, 1, EA; LI 116, PORTABLE COMBUSTION METER, 1, EA; LI 117, CRAFTSMAN 540 MECHANIC TOOL SET, 1, EA; LI 118, CRAFTSMAN 3 TIER TOOL BOX, 1, EA; LI 119, REFRIGERANT RECOVERY MACHINE, 4, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.fedbid.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MCO Belvoir - ICO Joint Base Myer Henderson Hall intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MCO Belvoir - ICO Joint Base Myer Henderson Hall is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids.All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com.Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process.Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com.Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/. The selected bidder must comply with the Governments requirement to submit invoices through Wide Area Workflow. Information pertaining to Wide Area Workflow may be viewed at https://wawf.eb.mil/. Award will be made to a single bidder who is deemed responsible in accordance with the Federal Acquisition Regulation (FAR), whose bid conforms to the requirement, and whose bid, judged by an overall assessment represents the Lowest Priced Technically Acceptable bid.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/34e9f863ea5dbce00de591d2d922af9f)
- Place of Performance
- Address: FORT MYER, VA 22211
- Zip Code: 22211-1234
- Zip Code: 22211-1234
- Record
- SN02897885-W 20120927/120926002158-34e9f863ea5dbce00de591d2d922af9f (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |