Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF OCTOBER 03, 2012 FBO #3966
SOLICITATION NOTICE

20 -- Drydock repairs for U.S. Coast Guard Cutter MALLET - Draft Specification, Drydock Repairs for Coast Guard Cutter MALLET

Notice Date
10/1/2012
 
Notice Type
Presolicitation
 
NAICS
336611 — Ship Building and Repairing
 
Contracting Office
Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 2, 1301 Clay St., Suite 807N, Oakland, California, 94612-5249, United States
 
ZIP Code
94612-5249
 
Solicitation Number
DRYDOCK-CG-MALLET
 
Archive Date
11/27/2012
 
Point of Contact
Andrew G. Jacobs, Phone: 5106375974
 
E-Mail Address
Andrew.G.Jacobs@uscg.mil
(Andrew.G.Jacobs@uscg.mil)
 
Small Business Set-Aside
Total Small Business
 
Description
Draft Specification for drydock repair of Coast Guard Cutter MALLET. The U.S. Coast Guard Surface Forces Logistics Center, contracting and procurement IBCT product line intends to issue a solicitation requesting proposals for dry-dock repairs for the U.S. Coast Guard Cutter MALLET (WLIC 75304) a 75 foot inland construction tender. The Coast Guard intends to conduct this procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 15, Contracting by Negotiation. This procurement will be issued as a small business set aside. The NAICS code will be 336611 and the small business size standard will be less than 1000 employees. The solicitation will be issued as a best value request for proposal (RFP) approximately 5 - 12 October 2012 with proposals due approximately 5 - 12 November 2012. Proposals will be evaluated using price and past performance as evaluation factors with past performance and price being considered of equal importance. The solicitation/RFP will be issued via the Federal Business Opportunity (FedBizOpps) website at http://www.fbo.gov/. A hard copy solicitation will not be issued. Contractors will need to monitor the FedBizOpps website for RFQ/solicitation release and any subsequent amendments. The home pier of the vessel is Corpus Christi, TX 78402. The vessel is geographically restricted to 650 nautical miles from home port and no open water transit. The period of performance (based on the cutter's availability) is: 6 Feb 2013 - 28 Mar 2013. The place of performance will be at the contractor's facility. The current draft list of items for this requirement is listed below with "D" in the "Item" column standing for definite item and "O" standing for option item. ITEM DESCRIPTION D-001 Hull Plating (Side Scan), Ultrasonic Testing- Tender D-002 Hull Plating (Side Scan), Ultrasonic Testing - Barge O-003 Hull and Structural Plating (General) - Degraded Weld (Steel), Repair O-004 Hull and Structural Plating (General) - Degraded Weld (Steel), Repair D-005 Appendages (U/W), Leak Test - Tender D-006 Appendages (U/W), Leak Test - Barge D-007 Propulsion Shaft Rope Guards, Inspect and Repair O-008 Appendages (U/W) - Internal, Preserve - Tender O-009 Appendages (U/W) - Internal, Preserve - Barge O-010 Tanks (MP Fuel Service), Clean & Inspect - Tender D-011 Propulsion Shaft Seals (Mechanical) Inspect and Clean O-012 Propulsion Shaft Bearings (External), Renew D-013 Propellers, Remove, Inspect, and Reinstall D-014 Fathometer Transducer, Renew - Tender D-015 Fathometer Transducer, Renew - Barge D-016 Compressed Air Receivers (All), Clean, Inspect, and Hydro - Tender D-017 Compressed Air Receivers (All), Clean, Inspect, and Hydro - Barge O-018 Rudder Assembly, Remove, Inspect and Reinstall D-019 Rudder Stock Bearings, Check Clearances D-020 Traction Winches - Tender, Overhaul D-021 U/W Body, Preserve "100%" - Tender D-022 U/W Body, Preserve "100%" - Barge O-023 Stern Tube Interior Surfaces, Preserve 100% D-024 Cathodic Protection / Zinc Anodes, Renew- Tender D-025 Cathodic Protection / Zinc Anodes, Renew- Barge D-026 Drydocking - Tender D-027 Drydocking - Barge D-028 Temporary Services, Provide D-029 Sea Trial Performance, Provide Support O-030 Tanks (Sewage Holding), Preserve "100%" - Tender O-031 Tanks (Potable Water), Preserve "Partial" - Tender D-032 Keel Coolers, Clean, Inspect and Hydro D-033 Sea Strainers - Duplex (All Sizes), Overhaul D-034 Spud Winch, Inspect - Barge O-035 Sewage Holding Tanks, Clean and Inspect - Tender D-036 Decks - Exterior (Barge Construction), Preserve 100% O-037 Bilges (Machinery Space), Tender and Barge - Preserve O-038 Bilges (Non-Machinery Space), Tender and Barge - Preserve D-039 Main Deck Scupper Drain Piping, Renew O-040 Potable Water Shore Connection Piping, Renew D-041 Gooseneck Ventilation, Renew D-042 Chilled Water Valves, Renew D-043 Vacuum Sewage Piping, Replacement D-044 Hull and Structural Plating (General) -10.2-Pound Steel, Repair - Tender D-045 Hull and Structural Plating (General) -10.2-Pound Steel, Repair - Barge D-046 Hull and Structural Plating (General) - 12.75-Pound Steel Plate, Repair - Tender O-047 Tanks (Potable Water), Inspect - Tender O-048 Propulsion Shafting; Remove, Inspect, and Reinstall D-049 Propulsion Shaft Bearings (External), Check Clearances O-050 Tanks (MP Fuel Service), Clean & Inspect - Barge D-051 Spuds, Overhaul - Barge D-052 Hull Plating and Structural Members, Inspect and Repair (Various Locations) D-053 Voids (Non-Accessible), Leak Test - Tender D-054 Voids (Non-Accessible), Leak Test - Barge O-055 Non-Accessible Voids - Internal, Preserve - Tender D-056 Propulsion Shafting; Strain Gauge Alignment Inspections O-057 Tanks (Potable Water), Preserve "100%" - Tender O-058 Non-Accessible Voids - Internal, Preserve - Barge The draft specification for this project is posted with this pre-solicitation synopsis for review from interested parties. Drawings on CD-ROM will be free of charge to contractors upon request. The contact for drawings is Andrew Jacobs at 510-637-5974, or Andrew.G.Jacobs@uscg.mil. Certifications: All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. Contractors shall provide the following as described in SFLC Standard Specification 8634: 1) A current certification of its drydocking facility (prior to any contract award) 2) Pre-award calculations (prior to any contract award) 3) The docking and undocking calculations (after any contract award)
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/VPLMLCP/DRYDOCK-CG-MALLET/listing.html)
 
Place of Performance
Address: The contractor's facility, United States
 
Record
SN02905362-W 20121003/121001234732-ca2cfdd5adc7ed986ccaf579ab65c8a6 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.