MODIFICATION
28 -- AUGMENTOR COMPONENT, AIRCRAFT GAS TURBINE ENGINE LINER
- Notice Date
- 10/19/2012
- Notice Type
- Modification/Amendment
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- DEPARTMENT OF THE AIR FORCE; BLDG 3001 SUITE 2AH82A; TINKER AFB;OK; 73145
- ZIP Code
- 73145
- Solicitation Number
- FA8121-12-R-0046
- Response Due
- 10/31/2012
- Archive Date
- 1/29/2013
- Point of Contact
- Kenyatta Harper, Phone: (405) 734-8487
- E-Mail Address
-
kenyatta.harper@tinker.af.mil
(kenyatta.harper@tinker.af.mil)
- Small Business Set-Aside
- N/A
- Description
- All data listed in Section J of the solicitation must be obtained from the buyer (listed in block 7 on page 1 of the solicitation). 1) Estimated issue date and estimated closing/response date issued: 01 October 2012 and 31 October 2012. 2) SOL # FA8121-12-R-0046 PR # FD2030-12-00987 3) Repair/Remanufacture - Firm Fixed Price, One Year Contract 4) RMC/RMSC - 3/C 5) Item - F100-PW-229 Convergent Nozzle Segment Seal Liner (Applicable to F-15, F-16) 6) NSN - 2840-01-308-4469 NZ 7) P/N - 4078304 or 4071130 8) Description - Length: 15 Inches; Width: 4.5 Inches; Height: 0.5 Inches; Material: Columbium Alloy; Function: The Convergent Seal Liner Protects The Convergent Seal From High Temperature Exhaust Gases. 9) Total Line Item Quantities: Item 0001 - 1,700 Each - Remanufacture of Convergent Nozzle Segment Seal Liner Item 0002 - 1 Lot - Over & Above Item 0003 - 1 Lot - DATA IAW 1423 10) Application - F100-PW-229 Aircraft Engine (Applicable to F-15, F-16) 11) Destination: Item 0001: SW3211, 3301 F AVE CEN REC BLDG 506 DR 22, Tinker AFB, OK 73145-8000 Item 0002: TBD Item 0003: TBD 12) Required Delivery: Item 0001: 30 Calendar Days After Receipt Of (ARO) Reparables. Delivery will be 400 each per month starting 30 days after receipt of assets and will continue at a rate of 400 each per month until delivery is complete. Item 0002: TBD Item 0003: TBD 13) Qualification Requirements: Sources must be qualified prior to being considered for award. To be eligible for contract award, the offeror must be an approved source IAW FAR 52.209-1, Qualification Requirements. The Government is not required to delay contract award to review pending Source Approval Requests (SARs). Therefore, offerors are encouraged to submit SARs as soon as possible. If the Government has not completed review of a SAR when the contract is awarded, the SAR will be retained and the source will be reviewed as a possible source for future awards. 14) Export Control Requirements: Yes. Item is export controlled. The solicitation/procurement data list is approved for release only to U.S. DoD contractors who are registered and certified with the Defense Logistics Information Service (DLIS). Submission of DD Form 2345, Military Critical Technical Data Agreement, with your request for the solicitation is required as specified in the International Traffic in Arms Regulation (ITAR), 22 CFR Sections 121 through 128. Foreign contractors cannot participate as prime contractors. The technical data will not be available until the solicitation is posted. 15) If unit price exceeds $5,000, then UID requirements will apply. 16) Additional Information - Authority: 10 U.S.C. 2304 (C) (1), Justification: Supplies (or service) required are available from one or only a limited number of source(s) and no other type of supplies or services will satisfy agency requirements. All responsible sources solicited may submit a capability statement, proposal, or quotation, which shall be considered by the agency. Intended source is Unison Engine Components-Manchester. Based upon market research, the Government is not using the policies contained in Part12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. NOTE: An Ombudsman has been appointed to hear concerns from Offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 736-3273. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. 17) Buyer name, phone #, and email address: Kenyatta Harper (405) 734-8487 kenyatta.harper@tinker.af.mil 18) Other Information - Electronic procedures will be used for this solicitation. Hardcopies of the solicitation will not be sent from this office. The solicitation will be available for download only at www.fedbizopps.gov
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCCC/FA8121-12-R-0046/listing.html)
- Record
- SN02916761-W 20121021/121019234218-6527e213e1dc2fa054b2666c7ac450c4 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |