SOLICITATION NOTICE
20 -- Dockside repairs for U.S. Coast Guard Cutter ANVIL - Draft Specification for ANVIL
- Notice Date
- 11/16/2012
- Notice Type
- Presolicitation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 2, 1301 Clay St., Suite 807N, Oakland, California, 94612-5249, United States
- ZIP Code
- 94612-5249
- Solicitation Number
- DOCKSIDE-CG-ANVIL
- Point of Contact
- Andrew G. Jacobs, Phone: 5106375974
- E-Mail Address
-
Andrew.G.Jacobs@uscg.mil
(Andrew.G.Jacobs@uscg.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Draft specification for ANVIL The U.S. Coast Guard Surface Forces Logistics Center, contracting and procurement IBCT product line intends to issue a solicitation requesting proposals for dockside repairs for the U.S. Coast Guard Cutter ANVIL (WLIC 75301) a 75 foot "A Class" inland construction tender. The Coast Guard intends to conduct this procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 15, Contracting by Negotiation. This procurement will be issued as a small business set aside. The NAICS code will be 336611 and the small business size standard will be less than 1000 employees. The solicitation will be issued as a best value request for proposal (RFP) approximately 20 November 2012 with proposals due approximately 20 December 2012. Proposals will be evaluated using price and past performance as evaluation factors with past performance being considered more important than price. The solicitation/RFP will be issued via the Federal Business Opportunity (FedBizOpps) website at http://www.fbo.gov/. A hard copy solicitation will not be issued. Contractors will need to monitor the FedBizOpps website for RFQ/solicitation release and any subsequent amendments. All required dock side repairs will be at the cutter's home pier in Charleston, SC. The performance period is anticipated to be from approximately April 9, 2013 - May 8, 2013. The current draft list of items for this requirement is listed below: ITEM DESCRIPTION WORK ITEM 1: Traction Winches (Tender), Overhaul WORK ITEM 2: Spuds, Overhaul - Barge WORK ITEM 3: Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test - Barge WORK ITEM 4: Hull Fittings (Mooring, Towing, and Miscellaneous), Inspect and Test - Tender WORK ITEM 5: Hull Fittings (Mooring and Towing), Inspect and Test - Barge WORK ITEM 6: Drop Windows, Overhaul and Inspect WORK ITEM 7: Propulsion Shaft Brake, Install WORK ITEM 8: Deck Covering (Interior Wet/Dry), Renew WORK ITEM 9: Galley Sink Grease Interceptor, Renew WORK ITEM 10: Firemain Piping, Renew WORK ITEM 11: Compartment Interior (Barge Aft Rake), Abate Lead Coating on Overhead Surfaces WORK ITEM 12: Compartment Interior (Tender Forepeak Tank), Abate Lead Coating on Overhead Surfaces WORK ITEM 13: Compartment Interior (Barge Port and Starboard Voids), Abate Lead Coating on Overhead Surfaces WORK ITEM 14: Bilge Piping and Strainers, Renew WORK ITEM 15: Ventilation Systems (Engine Room, Galley, and Laundry Room), Commercial Cleaning WORK ITEM 16: Compressed Air Receivers (All), Clean, Inspect, and Hydro - Tender WORK ITEM 17: Tanks (Potable Water), Preserve "100%" - Barge WORK ITEM 18: Vent Fans and Motors, Overhaul WORK ITEM 19: Deck Head Plating, Renew WORK ITEM 20: Main Deck Scupper Drain Piping, Renew WORK ITEM 21: Air Conditioning Condenser Salt Water Cooling Piping, Renew WORK ITEM 22: Barge Fuel Oil Transfer Piping, Repair The draft specification for this project is posted with this pre-solicitation synopsis for review from interested parties. Drawings on CD-ROM will be free of charge to contractors upon request. The contact for drawings is Andrew Jacobs at 510-637-5974, or Andrew.G.Jacobs@uscg.mil. Certifications: All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. For further information or questions regarding this potential solicitation, contact Andrew Jacobs at 510-637-5974, or Andrew.G.Jacobs@uscg.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/VPLMLCP/DOCKSIDE-CG-ANVIL/listing.html)
- Place of Performance
- Address: All required dock side repairs will be at the cutter's home pier in Charleston, SC., Charleston, South Carolina, United States
- Record
- SN02932256-W 20121118/121116234231-6b20243a1fb376830a0c83ad1c5c8c88 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |