SOLICITATION NOTICE
K -- UPGRADE OF CLOUD PARTICLE PROBES
- Notice Date
- 4/22/2013
- Notice Type
- Presolicitation
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- NASA/Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 44135
- ZIP Code
- 44135
- Solicitation Number
- NNC13469093Q
- Response Due
- 4/26/2013
- Archive Date
- 4/22/2014
- Point of Contact
- Marilyn D. Stolz, Contract Specialist, Phone 216-433-2756, Fax 216-433-5489, Email Marilyn.D.Stolz@nasa.gov
- E-Mail Address
-
Marilyn D. Stolz
(Marilyn.D.Stolz@nasa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- NASA/GRC has a requirement for an upgrade and a standard calibration of three cloud particle probes. FIRST PROBE (one job): DIAG-0011 CIP: Diagnostic Service Evaluation includes RD-0076 NRE NASA Glenn CIP convert CIP-GS firmware to Mono with extended slice rate and includes GS-Rev-3 DSP board; CAL-0079 CIP Korolev Tip Retrofit; RD-0072 NRE CIP install 115 power supply to 28V for Anti-Ice heaters;RD-0102 NRE Nasa Glenn CIP-GS conversion to TiN; CAL-0006 CIP: Maintenance and Calibration. SECOND PROBE (one job): DIAG-0010 CDP: Diagnostic Service Evaluation includes RD-0061 NRE NASA GLENN CDP upgrade to Korolev style tip and window guards; RD-0062 NRE NASA GLENN CDP removal of anodization and plate with Titanium Nitride, increase cross heating/deicing based on Ottawa next test configuration crossarm 70W, window carriers 35W; PWS-0206 24VDC@25A 85-264VAC 600W AC-DC power supply to accomodate larger Anti-Ice heaters; LAB-0000 Labor, General to install PWS-0206; CAL-0093 CDP to PBP, No Clean/No Cal Upgrade firmware to include Particle-by-Particle data; CAL-0009 CDP: Maintenance and Calibration. THIRD PROBE (one job): DIAG-0019 PIP: Diagnostic Service Evaluation PIP sn-010 includes RD-0072 NRE Env Canada PIP install 115 power supply to 28V use PWS-0206; RD-0073 NRE NASA-Glenn PIP add heater & control to laser; CAL-0011 PIP: Maintenance and Calibration Includes installation of Extended Slice Firmware after PADS calibration, RD-0071 NRE PIP NASA-Glenn, remove anodization, new plate with TiN; CAL-0011 PIP: Maintenance and Calibration, After calibration, install 1024-slice firmware. NASA/GRC intends to purchase the items from Droplet Measurement Technologies on a sole source basis. This is an upgrade and a standard calibration of cloud particle probes. The statutory authority permitting other than full and open competition is Federal Acquisition Regulation (FAR) 6.302-1, 10 U.S.C. 2304(c)(1). The Government intends to acquire a commercial item using FAR Part 12. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 4:30 p.m. local time on April 26, 2013. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. All responsible sources may submit an offer which shall be considered by the agency. NASA Clause 1852.215-84, Ombudsman, is applicable. The Center Ombudsman for this acquisition can be found at http://prod.nais.nasa.gov/pub/pub_library/Omb.html.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/GRC/OPDC20220/NNC13469093Q/listing.html)
- Record
- SN03041964-W 20130424/130422234117-36c3f194e3bf26766a6b9e18db64b753 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |