FBODaily.com | FedBizOpps: PRESOL | 58 | Curtiss Wright - Solicitation FA8224-13-R-0090

FBO DAILY - FEDBIZOPPS ISSUE OF AUGUST 03, 2013 FBO #4270
SOLICITATION NOTICE

58 -- Curtiss Wright - Solicitation FA8224-13-R-0090

Notice Date: 8/1/2013
Notice Type: Combined Synopsis/Solicitation
NAICS: 334418 — Printed Circuit Assembly (Electronic Assembly) Manufacturing
Contracting Office: Department of the Air Force, Air Force Materiel Command, AFLCMC / AFSC / AFNWC - HILL AFB, ., Hill AFB, Utah, 84056, United States
ZIP Code: 84056
Solicitation Number: FA8224-13-R-0090
Point of Contact: Dayna Parkin-Urquhart, Phone: 1-801-775-3564
E-Mail Address: dayna.urquhart@hill.af.mil
(dayna.urquhart@hill.af.mil)
Small Business Set-Aside: N/A
Description: Offerors please fill out the necessary portions of the solicitation to include signing all necessary documents with your proposals. Other Than Full and Open Competition. The Air Force plans to procure CLIN: 0001 three each VME-1908-0180 : 6U VME Single Board Computer. VME64x Bus support w/standard P0 Connector. Ruggedization: Air-Cooled Level 0 CPU: Intel Core i7 (4th Gen Quad Core) System Memory: 8Gbytes of 1066 MHz DDR3 SDRAM with ECC System Flash: 8Gbytes of non-volatile NAND flash. Software Load: Fedora Linux Front via breakout cable; (2) EIA-232 ports, (1) Gigabit Ethernet port, (1) USB 2.0 port, (1) DVI, and (1) Reset button. P2 Connector: (2) EIA-232 ports, (2) EIA-422 ports, (1) AC97 Audio port, (8) GPIO, (1) VGA (1) DVI P0 Connector: (2) Gigabit Ethernet ports, (1) SATA 3.0 port, (2) USB 2.0 Ports X/PMC Sites: (2) 64 bit/133 MHz PMC sites -or- (2) 8xPCIe XMC sites orcombinations of PMC and XMC. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0002 six each RTM-1905-0003 : Rear Transition Module for the SVME/DMV-1905. I/O mode 3 and 4 - and SVME-1908 Mode 0 This transition mode - contains connectors providing access to: On the card edge panel : 2 x Gigabit Ethernet, 2 x RS232, 1 x SATA, 2 x USB, Reset button, and 2 x DVI/RGB. Additional connectors not on card edge: 2 x RS422 Jumper Headers are provided for access to: 2 x 64 X/PMC I/O, Audio, 8 DIO, and write protects EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0003 three CBL-1905-0003 : Breakout cable for SVME-1905/1908 and VPX6-1957-Axx Front Panel I/O. This cable connects to the high-density connector on the SVME-1905 and VPX6-1956-Axx front panel. Provides separate branches: 2 x RS232 ports on DE-9, 1 x GigE port on RJ45 jack, 1 x USB on USB plug, 1 x push button reset switch, and 1 x DVI-D connector. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0004 two each XF05D-S17 : Digital I/O XMC Module, fitted with a Xilinx Virtex 5 XC5VSX95T-2I user programmable FPGA with 132 front panel digital I/O signals, two banks of 128 Mbytes (64Mx16) DDR2 SDRAM, two banks of 9Mbytes (4Mx18) QDR2 SRAM. Fitted with optional XMC format P15 connector for PCIe. PMC P14 digital I/O. Air-cooled level 0. (NO SUBSTITUTIONS ALLOWED). CLIN: 0005 one each XF05D-XFL : Software and HDL Code development tools for CWCEC XMC FPGA05D PMC/XMC digital I/O modules. Support for Linux operating system that includes: VHDL library code blocks (demonstrating how board resources can be used), Linux drivers, API with C support libraries. (NO SUBSTITUTIONS ALLOWED). CLIN: 0006 one each PF05-XFL : Software and HDL Code development tools for CWCEC PMC-FPGA05 PMC modules. Support for Linux operating system that includes: VHDL library code blocks (demonstrating how board resources can be used), Linux drivers, API with C support libraries, Example code, FLASH programming and board debug utilities. (NO SUBSTITUTIONS ALLOWED). CLIN: 0007 one each DSW-1908-6150-FED6 : CWCEC Fedora 64 bit BSP for the SVME/DMV-1908SBC. Product(s) Supported: SVME/DMV-1908-xxxx Includes: FED X86 64 INSTALLER FED X86 64 DRVS N/S On 3 CD/DVDs (NO SUBSTITUTIONS ALLOWED). CLIN: 0008 three each SVME-1908-0180 : 6U VME Single Board Computer. VME64x Bus support w/standard P0 Connector. Ruggedization: Air-Cooled Level 0 CPU: Intel Core i7 (4th Gen Quad Core) System Memory: 8Gbytes of 1066 MHz DDR3 SDRAM with ECC System Flash: 8Gbytes of non-volatile NAND flash. Software Load: Fedora Linux Front via breakout cable; (2) EIA-232 ports, (1) Gigabit Ethernet port, (1) USB 2.0 port, (1) DVI, and (1) Reset button. P2 Connector: (2) EIA-232 ports, (2) EIA-422 ports, (1) AC97 Audio port, (8) GPIO, (1) VGA (1) DVI P0 Connector: (2) Gigabit Ethernet ports, (1) SATA 3.0 port, (2) USB 2.0 Ports X/PMC Sites: (2) 64 bit/133 MHz PMC sites -or- (2) 8xPCIe XMC sites -orcombinations of PMC and XMC. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0009 six each CBL-1905-0003 : Breakout cable for SVME-1905/1908 and VPX6-1957-Axx Front Panel I/O. This cable connects to the high-density connector on the SVME-1905 and VPX6-1956-Axx front panel. Provides separate branches: 2 x RS232 ports on DE-9, 1 x GigE port on RJ45 jack, 1 x USB on USB plug, 1 x push button reset switch, and 1 x DVI-D connector. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0010 one each XF05D-S17 : Digital I/O XMC Module, fitted with a Xilinx Virtex 5 XC5VSX95T-2I user programmable FPGA with 132 front panel digital I/O signals, two banks of 128 Mbytes (64Mx16) DDR2 SDRAM, two banks of 9Mbytes (4Mx18) QDR2 SRAM. Fitted with optional XMC format P15 connector for PCIe. PMC P14 digital I/O. Air-cooled level 0. (NO SUBSTITUTIONS ALLOWED). CLIN: 0011 five each SVME-1905-0183 6U VME SIngle Board COmputer. VME64x Bus support w/standard P0 Connector. Ruggedization: Air-Cooled Level 0 CPU: 2.53 GHz Intel Core i7 with 4 Mbytes of internal L3 cache (2 cores). System Memory: 8Gbytes of 1066 MHz DDR3 SDRAM with ECC System Flash: 8Gbytes of non-volatile NAND flash. Software Load: Winder River Linux 3.0programmed into on-board NAND Flash. Front via breakout cable; (2) EIA-232 ports, (1) Gigabit Ethernet port, (1) USB 2.0 port, (1) DVI, and (1) Reset button. P2 Connector: (2) EIA-232 ports, (2) EIA-422 ports, (1) AC97 Audio port, (8) GPIO, (1) VGA (1) DVI P0 COnnector: (2) Gigabit Ethernet ports, (1) SATA 3.0 port, (2) USB 2.0 Ports X/PMC Sites: (2) 64 bit/133 MHz PMC sites -or- (2) 8xPCle XMC sites -or- combinations of PMC and XMC. (NO SUBSTITUTIONS ALLOWED). CLIN: 0012 four each XF05D-S17 : Digital I/O XMC Module, fitted with a Xilinx Virtex 5 XC5VSX95T-2I user programmable FPGA with 132 front panel digital I/O signals, two banks of 128 Mbytes (64Mx16) DDR2 SDRAM, two banks of 9Mbytes (4Mx18) QDR2 SRAM. Fitted with optional XMC format P15 connector for PCIe. PMC P14 digital I/O. Air-cooled level 0. (NO SUBSTITUTIONS ALLOWED). CLIN: 0013 one each XF05D-XFV : Software and HDL Code development tools for CWCEC XMC-FPGA05D PMC/XMC digital I/O modules. Support for VxWorks operating system that includes: VHDL library code blocks (demonstrating how board resources can be used), VxWorks drivers, API with C support libraries. EUS Code No License Required. (NO SUBSTITUTIONS ALLOWED). CLIN: 0014 two each RTM-1905-0003 : Rear Transition Module for the SVME/DMV-1905. I/O mode 3 and 4 - and SVME-1908 Mode 0 This transition mode - contains connectors providing access to: On the card edge panel : 2 x Gigabit Ethernet, 2 x RS232, 1 x SATA, 2 x USB, Reset button, and 2 x DVI/RGB. Additional connectors not on card edge: 2 x RS422 Jumper Headers are provided for access to: 2 x 64 X/PMC I/O, Audio, 8 DIO, and write protects EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0015 two each SVME-1908-0180 : 6U VME Single Board Computer. VME64x Bus support w/standard P0 Connector. Ruggedization: Air-Cooled Level 0 CPU: Intel Core i7 (4th Gen Quad Core) System Memory: 8Gbytes of 1066 MHz DDR3 SDRAM with ECC System Flash: 8Gbytes of non-volatile NAND flash. Software Load: Fedora Linux Front via breakout cable; (2) EIA-232 ports, (1) Gigabit Ethernet port, (1) USB 2.0 port, (1) DVI, and (1) Reset button. P2 Connector: (2) EIA-232 ports, (2) EIA-422 ports, (1) AC97 Audio port, (8) GPIO, (1) VGA (1) DVI P0 Connector: (2) Gigabit Ethernet ports, (1) SATA 3.0 port, (2) USB 2.0 Ports X/PMC Sites: (2) 64 bit/133 MHz PMC sites -or- (2) 8xPCIe XMC sites -orcombinations of PMC and XMC. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0016 two each XF05D-S17 : Digital I/O XMC Module, fitted with a Xilinx Virtex 5 XC5VSX95T-2I user programmable FPGA with 132 front panel digital I/O signals, two banks of 128 Mbytes (64Mx16) DDR2 SDRAM, two banks of 9Mbytes (4Mx18) QDR2 SRAM. Fitted with optional XMC format P15 connector for PCIe. PMC P14 digital I/O. Air-cooled level 0. (NO SUBSTITUTIONS ALLOWED). CLIN: 0017 four each SVME-1908-0180 : 6U VME Single Board Computer. VME64x Bus support w/standard P0 Connector. Ruggedization: Air-Cooled Level 0 CPU: Intel Core i7 (4th Gen Quad Core)System Memory: 8Gbytes of 1066 MHz DDR3 SDRAM with ECC System Flash: 8Gbytes of non-volatile NAND flash. Software Load: Fedora Linux Front via breakout cable; (2) EIA-232 ports, (1) Gigabit Ethernet port, (1) USB 2.0 port, (1) DVI, and (1) Reset button. P2 Connector: (2) EIA-232 ports, (2) EIA-422 ports, (1) AC97 Audio port, (8) GPIO, (1) VGA (1) DVI P0 Connector: (2) Gigabit Ethernet ports, (1) SATA 3.0 port, (2) USB 2.0 Ports X/PMC Sites: (2) 64 bit/133 MHz PMC sites -or- (2) 8xPCIe XMC sites -orcombinations of PMC and XMC. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0018 nine each CBL-1905-0003 : Breakout cable for SVME-1905/1908 and VPX6-1957-Axx Front Panel I/O. This cable connects to the high-density connector on the SVME-1905 and VPX6-1956-Axx front panel. Provides separate branches: 2 x RS232 ports on DE-9, 1 x GigE port on RJ45 jack, 1 x USB on USB plug, 1 x push button reset switch, and 1 x DVI-D connector. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0019 XF05D-S17 : Digital I/O XMC Module, fitted with a Xilinx Virtex 5 XC5VSX95T-2I user programmable FPGA with 132 front panel digital I/O signals, two banks of 128 Mbytes (64Mx16) DDR2 SDRAM, two banks of 9Mbytes (4Mx18) QDR2 SRAM. Fitted with optional XMC format P15 connector for PCIe. PMC P14 digital I/O. Air-cooled level 0.(NO SUBSTITUTIONS ALLOWED). CLIN: 0020 two each SVME-1908-0180 : 6U VME Single Board Computer. VME64x Bus support w/standard P0 Connector. Ruggedization: Air-Cooled Level 0 CPU: Intel Core i7 (4th Gen Quad Core) System Memory: 8Gbytes of 1066 MHz DDR3 SDRAM with ECC System Flash: 8Gbytes of non-volatile NAND flash. Software Load: Fedora Linux Front via breakout cable; (2) EIA-232 ports, (1) Gigabit Ethernet port, (1) USB 2.0 port, (1) DVI, and (1) Reset button. P2 Connector: (2) EIA-232 ports, (2) EIA-422 ports, (1) AC97 Audio port, (8) GPIO, (1) VGA (1) DVI P0 Connector: (2) Gigabit Ethernet ports, (1) SATA 3.0 port, (2) USB 2.0 Ports X/PMC Sites: (2) 64 bit/133 MHz PMC sites -or- (2) 8xPCIe XMC sites -orcombinations of PMC and XMC. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0021 six each CBL-1905-0003 : Breakout cable for SVME-1905/1908 and VPX6-1957-Axx Front Panel I/O. This cable connects to the high-density connector on the SVME-1905 and VPX6-1956-Axx front panel. Provides separate branches: 2 x RS232 ports on DE-9, 1 x GigE port on RJ45 jack, 1 x USB on USB plug, 1 x push button reset switch, and 1 x DVI-D connector. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0022 one each XF05D-S17 : Digital I/O XMC Module, fitted with a Xilinx Virtex 5 XC5VSX95T-2I user programmable FPGA with 132 front panel digital I/O signals, two banks of 128 Mbytes (64Mx16) DDR2 SDRAM, two banks of 9Mbytes (4Mx18) QDR2 SRAM. Fitted with optional XMC format P15 connector for PCIe. PMC P14 digital I/O. Air-cooled level 0. (NO SUBSTITUTIONS ALLOWED). CLIN: 0023 nine each SVME-1908-0180 : 6U VME Single Board Computer. VME64x Bus support w/standard P0 Connector. Ruggedization: Air-Cooled Level 0 CPU: Intel Core i7 (4th Gen Quad Core)System Memory: 8Gbytes of 1066 MHz DDR3 SDRAM with ECC System Flash: 8Gbytes of non-volatile NAND flash. Software Load: Fedora Linux Front via breakout cable; (2) EIA-232 ports, (1) Gigabit Ethernet port, (1) USB 2.0 port, (1) DVI, and (1) Reset button. P2 Connector: (2) EIA-232 ports, (2) EIA-422 ports, (1) AC97 Audio port, (8) GPIO, (1) VGA (1) DVI P0 Connector: (2) Gigabit Ethernet ports, (1) SATA 3.0 port, (2) USB 2.0 Ports X/PMC Sites: (2) 64 bit/133 MHz PMC sites -or- (2) 8xPCIe XMC sites -orcombinations of PMC and XMC. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0024 seven each CBL-1905-0003 : Breakout cable for SVME-1905/1908 and VPX6-1957-Axx Front Panel I/O. This cable connects to the high-density connector on the SVME-1905 and VPX6-1956-Axx front panel. Provides separate branches: 2 x RS232 ports on DE-9, 1 x GigE port on RJ45 jack, 1 x USB on USB plug, 1 x push button reset switch, and 1 x DVI-D connector. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0025 five each XF05D-S17 : Digital I/O XMC Module, fitted with a Xilinx Virtex 5 XC5VSX95T-2I user programmable FPGA with 132 front panel digital I/O signals, two banks of 128 Mbytes (64Mx16) DDR2 SDRAM, two banks of 9Mbytes (4Mx18) QDR2 SRAM. Fitted with optional XMC format P15 connector for PCIe. PMC P14 digital I/O. Air-cooled level 0. (NO SUBSTITUTIONS ALLOWED). CLIN 0026 eight each SVME-1908-0180 : 6U VME Single Board Computer. VME64x Bus support w/standard P0 Connector. Ruggedization: Air-Cooled Level 0 CPU: Intel Core i7 (4th Gen Quad Core)System Memory: 8Gbytes of 1066 MHz DDR3 SDRAM with ECC System Flash: 8Gbytes of non-volatile NAND flash. Software Load: Fedora Linux Front via breakout cable; (2) EIA-232 ports, (1) Gigabit Ethernet port, (1) USB 2.0 port, (1) DVI, and (1) Reset button. P2 Connector: (2) EIA-232 ports, (2) EIA-422 ports, (1) AC97 Audio port, (8) GPIO, (1) VGA (1) DVI P0 Connector: (2) Gigabit Ethernet ports, (1) SATA 3.0 port, (2) USB 2.0 Ports X/PMC Sites: (2) 64 bit/133 MHz PMC sites -or- (2) 8xPCIe XMC sites -orcombinations of PMC and XMC. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0027 eight each CBL-1905-0003 : Breakout cable for SVME-1905/1908 and VPX6-1957-Axx Front Panel I/O. This cable connects to the high-density connector on the SVME-1905 and VPX6-1956-Axx front panel. Provides separate branches: 2 x RS232 ports on DE-9, 1 x GigE port on RJ45 jack, 1 x USB on USB plug, 1 x push button reset switch, and 1 x DVI-D connector. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0028 three each SVME-1908-0180 : 6U VME Single Board Computer. VME64x Bus support w/standard P0 Connector. Ruggedization: Air-Cooled Level 0 CPU: Intel Core i7 (4th Gen Quad Core) System Memory: 8Gbytes of 1066 MHz DDR3 SDRAM with ECC System Flash: 8Gbytes of non-volatile NAND flash. Software Load: Fedora Linux Front via breakout cable; (2) EIA-232 ports, (1) Gigabit Ethernet port, (1) USB 2.0 port, (1) DVI, and (1) Reset button. P2 Connector: (2) EIA-232 ports, (2) EIA-422 ports, (1) AC97 Audio port, (8) GPIO, (1) VGA (1) DVI P0 Connector: (2) Gigabit Ethernet ports, (1) SATA 3.0 port, (2) USB 2.0 Ports X/PMC Sites: (2) 64 bit/133 MHz PMC sites -or- (2) 8xPCIe XMC sites -orcombinations of PMC and XMC. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0029 three each CBL-1905-0003 : Breakout cable for SVME-1905/1908 and VPX6-1957-Axx Front Panel I/O. This cable connects to the high-density connector on the SVME-1905 and VPX6-1956-Axx front panel. Provides separate branches: 2 x RS232 ports on DE-9, 1 x GigE port on RJ45 jack, 1 x USB on USB plug, 1 x push button reset switch, and 1 x DVI-D connector. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0030 four each XF05D-S17 : Digital I/O XMC Module, fitted with a Xilinx Virtex 5 XC5VSX95T-2I user programmable FPGA with 132 front panel digital I/O signals, two banks of 128 Mbytes (64Mx16) DDR2 SDRAM, two banks of 9Mbytes (4Mx18) QDR2 SRAM. Fitted with optional XMC format P15 connector for PCIe. PMC P14 digital I/O. Air-cooled level 0. (NO SUBSTITUTIONS ALLOWED). XF05D-S17 : Digital I/O XMC Module, fitted with a Xilinx Virtex 5 XC5VSX95T-2I user programmable FPGA with 132 front panel digital I/O signals, two banks of 128 Mbytes (64Mx16) DDR2 SDRAM, two banks of 9Mbytes (4Mx18) QDR2 SRAM. Fitted with optional XMC format P15 connector for PCIe. PMC P14 digital I/O. Air-cooled level 0. (NO SUBSTITUTIONS ALLOWED). CLIN: 0032 seven each SVME-1908-0180 : 6U VME Single Board Computer. VME64x Bus support w/standard P0 Connector. Ruggedization: Air-Cooled Level 0 CPU: Intel Core i7 (4th Gen Quad Core) System Memory: 8Gbytes of 1066 MHz DDR3 SDRAM with ECC System Flash: 8Gbytes of non-volatile NAND flash. Software Load: Fedora Linux Front via breakout cable; (2) EIA-232 ports, (1) Gigabit Ethernet port, (1) USB 2.0 port, (1) DVI, and (1) Reset button. P2 Connector: (2) EIA-232 ports, (2) EIA-422 ports, (1) AC97 Audio port, (8) GPIO, (1) VGA (1) DVI P0 Connector: (2) Gigabit Ethernet ports, (1) SATA 3.0 port, (2) USB 2.0 Ports X/PMC Sites: (2) 64 bit/133 MHz PMC sites -or- (2) 8xPCIe XMC sites -orcombinations of PMC and XMC. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0033 seven each XF05D-S17 : Digital I/O XMC Module, fitted with a Xilinx Virtex 5 XC5VSX95T-2I user programmable FPGA with 132 front panel digital I/O signals, two banks of 128 Mbytes (64Mx16) DDR2 SDRAM, two banks of 9Mbytes (4Mx18) QDR2 SRAM. Fitted with optional XMC format P15 connector for PCIe. PMC P14 digital I/O. Air-cooled level 0.(NO SUBSTITUTIONS ALLOWED). CLIN: 0034 four each CBL-1905-0003 : Breakout cable for SVME-1905/1908 and VPX6-1957-Axx Front Panel I/O. This cable connects to the high-density connector on the SVME-1905 and VPX6-1956-Axx front panel. Provides separate branches: 2 x RS232 ports on DE-9, 1 x GigE port on RJ45 jack, 1 x USB on USB plug, 1 x push button reset switch, and 1 x DVI-D connector. EUS Code No License Required (NO SUBSTITUTIONS ALLOWED). CLIN: 0035 one each Base Year MNT-XF05D-XFL : MNT-XF05D-XFL (Linux) is the yearly Software Upgrade Program (SUP) part number associated with FusionXF tools for the XMC-FPGA05D board. Period of Performance (09/01/2013-08/31/2014) (NO SUBSTITUTIONS ALLOWED). CLIN: 0036 one each Base Year MNT-PF05-XF : MNT-PF05-XF is the yearly Software Upgrade Program (SUP) part number associated with the PMC-FPGA05 board. Period of Performance (09/01/2013 - 08/31/2014). (NO SUBSTITUTIONS ALLOWED). CLIN: 0037 one each Base Year MNT-XF05D-XFV : MNT-XF05D-XFV (VxWorks) is the yearly Software Upgrade Program (SUP) part number associated with FusionXF tools for the XMC-FPGA05D board. Period of Performance 09/01/2013 - 08/31/2014. (NO SUBSTITUTIONS ALLOWED). CLIN: 1035 Option Year I MNT-XF05D-XFL : MNT-XF05D-XFL (Linux) is the yearly Software Upgrade Program (SUP) part number associated with FusionXF tools for the XMC-FPGA05D board.Period of Performance (09/01/2014-08/31/2015) (NO SUBSTITUTIONS ALLOWED). CLIN: 1036 one each Option Year I MNT-PF05-XF : MNT-PF05-XF is the yearly Software Upgrade Program (SUP) part number associated with the PMC-FPGA05 board. Period of Performance (09/01/2014 - 08/31/2015). CLIN: 1037 one each Option Year I MNT-XF05D-XFV : MNT-XF05D-XFV (VxWorks) is the yearly Software Upgrade Program (SUP) part number associated with FusionXF tools for the XMC-FPGA05D board. Period of Performance 09/01/2014 - 08/31/2015. (NO SUBSTITUTIONS ALLOWED). CLIN: 2035 one each Option Year II MNT-XF05D-XFL : MNT-XF05D-XFL (Linux) is the yearly Software Upgrade Program (SUP) part number associated with FusionXF tools for the XMC-FPGA05D board. Period of Performance (09/01/2015-08/31/2016) (NO SUBSTITUTIONS ALLOWED). CLIN: 2036 one each Option Year II MNT-PF05-XF : MNT-PF05-XF is the yearly Software Upgrade Program (SUP) part number associated with the PMC-FPGA05 board. Period of Performance (09/01/2015 - 08/31/2016). (NO SUBSTITUTIONS ALLOWED). CLIN: 2037 one each Option Year II MNT-XF05D-XFV : MNT-XF05D-XFV (VxWorks) is the yearly Software Upgrade Program (SUP) part number associated with FusionXF tools for the XMC-FPGA05D board. Period of Performance 09/01/2015 - 08/31/2016. (NO SUBSTITUTIONS ALLOWED). CLIN: 3035 one each Option Year III MNT-XF05D-XFL : MNT-XF05D-XFL (Linux) is the yearly Software Upgrade Program (SUP) part number associated with FusionXF tools for the XMC-FPGA05D board. Period of Performance (09/01/2016-08/31/2017) (NO SUBSTITUTIONS ALLOWED). CLIN: 3036 one each Option Year III MNT-PF05-XF : MNT-PF05-XF is the yearly Software Upgrade Program (SUP) part number associated with the PMC-FPGA05 board. Period of Performance (09/01/2016 - 08/31/2017). (NO SUBSTITUTIONS ALLOWED). CLIN: 3037 one each Option Year III MNT-XF05D-XFV : MNT-XF05D-XFV (VxWorks) is the yearly Software Upgrade Program (SUP) part number associated with FusionXF tools for the XMC-FPGA05D board. Period of Performance 09/01/2016 - 08/31/2017. (NO SUBSTITUTIONS ALLOWED). CLIN: 4035 one each Option Year IV MNT-XF05D-XFL : MNT-XF05D-XFL (Linux) is the yearly Software Upgrade Program (SUP) part number associated with FusionXF tools for the XMC-FPGA05D board. Period of Performance (09/01/2017-08/31/2018) (NO SUBSTITUTIONS ALLOWED). CLIN: 4036 one each Option Year IV MNT-PF05-XF : MNT-PF05-XF is the yearly Software Upgrade Program (SUP) part number associated with the PMC-FPGA05 board. Period of Performance (09/01/2017 - 08/31/2018). (NO SUBSTITUTIONS ALLOWED). CLIN: 4037 one each Option Year IV MNT-XF05D-XFV : MNT-XF05D-XFV (VxWorks) is the yearly Software Upgrade Program (SUP) part number associated with FusionXF tools for the XMC-FPGA05D board. Period of Performance 09/01/2014 - 08/31/2015. (NO SUBSTITUTIONS ALLOWED). The Government does not own the data rights to the data or software code and cannot reproduce the Curtiss Wright software. The Curtiss Wright software is a proprietary product of Curtiss Wright Controls Embedded Computing and no other company has the data rights to sell the KOR Target Generator. Contractor must be an authorized Curtiss Wright Controls Embedded Computing distributor; verification will be made with the company. AUTHORITY: 10 U.S.C. 2304 (C)(1), JUSTIFICATION: SUPPLIES REQUIRED ARE FROM ONLY ONE OR A LIMITED NUMBER OF RESPONSIBLE SOURCE(S) AND NO OTHER TYPE OF SUPPLIES WILL SATISFY AGENCY REQUIREMENTS. THE PROPOSED CONTRACT ACTION IS FOR SUPPLIES AND SERVICES FOR WHICH THE GOVERNMENT INTENDS TO SOLICIT AND NEGOTIATE WITH ONLY ONE, OR A LIMITED NUMBER OF SOURCES UNDER THE AUTHORITY OF FAR 6.301-1. INTERESTED PERSONS MAY IDENTIFY THEIR INTEREST AND CAPABILITY TO RESPOND TO THE REQUIREMENT OR SUBMIT PROPOSALS. THIS NOTICE OF INTENT IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. HOWEVER, ALL PROPOSALS RECEIVED PRIOR TO THE CLOSING DATE ON THE SOLICITATION WILL BE CONSIDERED BY THE GOVERNMENT. A DETEMINATION BY THE GOVERNMENT NOT TO COMPETE THIS PROPOSED CONTRACT BASED UPON RESPONSES TO THIS NOTICE IS SOLEY WITHIN THE DISCRETION OF THE GOVERNMENT. INFORMATION RECEIVED WILL NORMALY BE CONSIDERED SOLEY FOR THE PURPOSE OF DETERMINING WHETHER TO CONDUCT A COMPETITIVE PROCUREMENT. SPECIFICATIONS, PLANS, OR DRAWING RELATING TO THE PROCUREMENT DESCRIBED ARE INCOMPLETE OR NOT AVAILABLE AND CANNOT BE FURNISHED BY THE GOVERNMENT. THE GOVERNMENT DOES NOT OWN THE DATA OR RIGHTS TO THE DATA NEEDED TO PURCHASE THIS ITEM FROM ADDITIONAL SOURCES. The solicitation will be issued on 01 August 2013. The Offer Due Date is 15 August 2013, 10:00 AM MST. The entire solicitation will be made available only on FedBizOpps (FBO) website at: http://www.fbo.gov. Questions regarding this acquisition should be emailed to Dayna Urquhart at Dayna.Urquhart@hill.af.mil.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OOALC/FA8224-13-R-0090/listing.html)
Place of Performance: Address: Hill Air Force Base, Utah, 84056, United States; Zip Code: 84056
Record: SN03135653-W 20130803/130802000959-74ffac68e59e97cc179a3fe0cceab66e (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

58 -- Curtiss Wright - Solicitation FA8224-13-R-0090