MODIFICATION
20 -- SCHEDULED DRY-DOCK REPAIRS USCGC HAMMER (WLIC-75302) & USCG 68A BARGE (68014)
- Notice Date
- 9/9/2013
- Notice Type
- Modification/Amendment
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), USCG Surface Forces Logistics Center (SFLC) Procurement Branch 2, 1301 Clay St., Suite 807N, Oakland, California, 94612-5249, United States
- ZIP Code
- 94612-5249
- Solicitation Number
- HSCG85-14-Q-P45008
- Archive Date
- 10/26/2013
- Point of Contact
- Jack Rodman, Phone: (510) 637-5988, Jay S McReynolds, Phone: 510-637-5975
- E-Mail Address
-
Jack.E.Rodman@uscg.mil, jay.s.mcreynolds@uscg.mil
(Jack.E.Rodman@uscg.mil, jay.s.mcreynolds@uscg.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The United States coast guard surface forces Logistics Center, Contracting and Procurement branch 2 IBCT Product Line intends to issue a Commercial Request for Quote for Dockside Repairs for the United States Coast Guard Cutter: HAMMER (WLIC-75302). The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Subpart 13.5, Test Program for Certain Commercial Items. The NAICS Code is 336611 and the small business size standard is less than 1000 employees. The simplified acquisition will be issued as a Best Value for Quote (RFQ) on or about September 10, 2013. The RFQ will be issued via the Federal business Opportunity (FEDBIZOPPS) website at http://www.fbo.gov/. This requirement will be evaluated using price and past performance as an evaluation factors. Hard copies solicitation will not be issued. It is incumbent upon the contractors to monitor the FEDBIZOPPS website for RFQ release and all subsequent amendments. FEDBIZOPPS also contains an optional automatic notification service. THE ACQUISITION WILL BE SOLICITED AS A TOTAL SMALL BUSINESS SET-ASIDE. The performance period will be based following Cutter's Availability dates and completion time: USCGC HAMMER (WLIC-75302) will be available from January 8, 2014 through February 26, 2014 (50) fifty days after vessel becomes available. PLACE OF PERFORMANCE: The place of performance will be at the Contractor's Dry-dock. DESCRIPTION OF WORK The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC HAMMER (WLIC-75302). This work will include, but is not limited to: PRICING SCHEDULE FOR: USCGC HAMMER (WLIC-75D) DRYDOCK AVAILABILITY FY2013 ITEM DESCRIPTION UNIT PRICE UNIT QTY EXTENDED PRICE D-001 Hull Plating (Side Scan), Ultrasonic Testing - Tender JOB 1 D-002 Hull Plating (Side Scan), Ultrasonic Testing - Barge JOB 1 O-003 Hull and Structural Plating (General) - 10.2-Pound Steel, Repair - Tender 4 SQ FT 200 O-004 Hull and Structural Plating (General) - 10.2-Pound Steel, Repair - Barge 4 SQ FT 200 O-005 Hull and Structural Plating (General) - 12.75-Pound Steel Plate, Repair - Tender 4 SQ FT 50 D-006 Appendages (U/W), Leak Test - Barge JOB 1 O-007 Appendages (U/W) - Internal, Preserve - Barge JOB 1 D-008 Voids (Non-Accessible), Leak Test - Tender JOB 1 D-009 Voids (Non-Accessible), Leak Test - Barge JOB 1 O-010 Voids (Non-Accessible), Preserve Internal Surfaces - Tender JOB 1 O-011 Voids (Non-Accessible), Preserve Internal Surfaces - Barge JOB 1 O-012 Tanks (MP Fuel Service), Clean and Inspect - Tender JOB 1 D-013 Propulsion Shafting, Strain Gauge Alignment Inspections JOB 1 D-014 Propulsion Shafting; Remove, Inspect, and Reinstall JOB 1 D-015 Propulsion Shafting, Optical or Laser Alignment Check JOB 1 D-016 Propulsion Shaft Seals (Mechanical) Inspect And Clean JOB 1 D-017 Propulsion Shaft Bearings (External), Check Clearances JOB 1 D-018 Propellers, Remove, Inspect, and Reinstall JOB 1 O-019 Propeller, Perform Minor Repairs and Reconditioning JOB 1 D-020 Keel Coolers, Clean, Inspect and Hydro JOB 1 D-021 Fathometer Transducer, Renew - Tender JOB 1 D-022 Fathometer Transducer, Renew - Barge JOB 1 D-023 Sewage Holding Tanks, Clean and Inspect - Tender JOB 1 D-024 Grey Water Piping, Clean and Flush JOB 1 D-025 Decks - Exterior (Barge Construction), Preserve 100% JOB 1 D-026 U/W Body, Preserve (100%) - Tender JOB 1 D-027 U/W Body, Preserve (100%) - Barge JOB 1 O-028 Hull Plating Freeboard, Preserve -"100%" - Tender JOB 1 O-029 Hull Plating Freeboard, Preserve -"100%" - Barge JOB 1 D-030 Cathodic Protection / Zinc Anodes, Renew - Tender JOB 1 D-031 Cathodic Protection / Zinc Anodes, Renew - Barge JOB 1 D-032 Drydocking - Tender JOB 1 D-033 Drydocking - Barge JOB 1 D-034 Temporary Services, Provide JOB 1 D-035 Sea Trial Performance, Provide Support JOB 1 D-036 Fan Coil Units, Renew JOB 1 D-037 Buoy and Cargo Handling Crane, Shrink Wrap JOB 1 D-038 Crew's Berthing Deck, Bulkhead, & Overhead Surfaces, Abate 100% Lead & Asbestos Coatings JOB 1 D-039 Deck Covering (Interior Wet/Dry), Renew JOB 1 D-040 Tanks (MP Fuel Storage), Clean and Inspect - Barge JOB 1 D-041 Rudder Assembly, Remove, Inspect and Reinstall JOB 1 D-042 Rudder Stock Bearings Clearances, Check JOB 1 D-043 Spuds, Overhaul - Barge JOB 1 D-044 Spud Wells, Inspect & Preserve- Barge JOB 1 D-045 Spud and Cross-deck Winches, Inspect & Service - Barge JOB 1 D-046 Accessible Void(s), Preserve "100%" - Barge JOB 1 D-047 Stern Tube Interior Surfaces, Preserve 100% JOB 1 D-048 Pilot House Overhead, Repair JOB 1 D-049 Fan Cooling Unit Condensate Drain Piping, Renew JOB 1 D-050 Urinal Drain Piping, Renew JOB 1 D-051 Rudder(s), Preserve ("100%") - Tender JOB 1 D-052 Sewage Piping, Clean and Flush JOB 1 D-053 Cargo Hatch, Renew JOB 1 D-054 Spud Winch Foundations, Renew JOB 1 O-00A Composite Labor Rate Hour 2000 D-00B GFP Report NSP EA NSP O-00Z Laydays Day 5 Total Price of Definite Items Total Price of Option Items Total Price of Definite and Optional Items The Specification for this project is posted with this pre-solicitation synopsis for review and comments from interested parties. Potential contractors are strongly encouraged to make a Ship Check. For access please MKC at (904) 564-7607 email: Michael.R.Grimes@uscg.mil or LT Matthew Eyler at (504) 253-4755, Mobile: (504) 329-9245, email: Matthew.E.Eyler@uscg.mil Drawings on CD-ROM will be free of charge to contractors upon request. Contractors may contact Jack Rodman at (510) 637-5988 or email: Jack.E.Rodman@uscg.mil CERTIFICATIONS: All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. NOTICE: Funds are not presently available for this contract. The Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/VPLMLCP/HSCG85-14-Q-P45008/listing.html)
- Record
- SN03179502-W 20130911/130909234947-00177a6192360039fe553bc4a0f8a3c9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |