DOCUMENT
65 -- Allegra X-5 Clinical Sample Pre Package Centrifuge - Attachment
- Notice Date
- 2/18/2015
- Notice Type
- Attachment
- NAICS
- 339113
— Surgical Appliance and Supplies Manufacturing
- Contracting Office
- Department of Veterans Affairs;James J. Peters VA Medical Center;Network Contracting Office 3 (10N3NCO);130 West Kingsbridge Road;Bronx NY 10468-3904
- ZIP Code
- 10468-3904
- Solicitation Number
- VA24315N0501
- Response Due
- 2/26/2015
- Archive Date
- 4/27/2015
- Point of Contact
- Charline Cox
- Small Business Set-Aside
- N/A
- Description
- Document Type: Sources Sought Solicitation Number: N/A Original Responses Date: February 26, 2015 Classification Code: 65 NAICS CODE: 339113 Contracting Office Information: Department of Veterans Affairs Networking Contracting Office 3 10 W. Kingsbridge Road Rm. 9B-16 Bronx NY 10468 Synopsis: Please note that this is NOT a request for quotes or proposals. The Department of Veterans Affairs, New York Harbor Healthcare System is currently conducting a market survey for qualified firms capable of providing the listed items. The vendor will be responsible for, but not limited to providing the following brand name items: Description Quantity Allegra X-5 Clinical Sample Pre Package Centrifuge, 120 V 60Hz, IVD2 INTENDED USE This air-cooled benchtop centrifuge was designed specifically for the clinical laboratory. The Allegra X-5 performs with endurance under the most exacting standards, offering enhanced productivity and reliability for almost any clinical sample preparation. It includes swinging bucket rotors and common adapters to get up and running quickly. The Allegra X-5 is ideal for serum, plasma and whole blood sample processing; protein precipitate, particulate and cell sedimentation; in-vitro cytotoxicity and receptor binding sample processing. Objectives/Requirements Maximize throughput "Process up to 140 x 13mm blood tubes and 100 x 16mm blood tubes "Shorten run times with centrifugal forces up to 4,470 x g "Safely process hazardous samples with an optional Bio Certified rotor Designed for the clinical lab "Robust drive system "Motorized lid-locking system eases loading and unloading "Small footprint saves valuable lab space Specifications: Height, door closed:39.0 cm (15.3 in.) Height, door open:88.0 cm (34.6 in.) Width:49.6 cm (19.5 in.) Depth:63.4 cm (25.0 in.) Weight:77 kg (169 lb) Electrical Requirements:120 VAC, 12A, 60 Hz Maximum Heat Dissipation into Room under Steady-State Conditions:3750 BTU/hr (1.1 kW) Set Speed:100 to 4700 RPM (in 100-RPM increments) Set Time:1 min. to 9 hr 59 min, (in 1 min. increments) Speed Control:actual rotor speed, ± 50 RPM of set speed Ambient Temperature Range:5 to 40 °C Clearances Required:30 cm (11.8 in.) Humidity Restrictions:<80% (noncondensing) Pollution Degree:2 Time -- Actual Display:time remaining in run (timed run ± 1 minute) or ? and elapsed time (continuous run) Acceleration:10 acceleration rates Deceleration:10 deceleration rates Installation Category:II Speed Display:actual rotor speed in 100-RPM increments or in RCF (when selected) The North American Industry Classification Systems (NAICS) is 339113. Responses to this notice must be submitted in writing via email and must be received not later than February 26, 2015 2:00 PM EST. No telephone inquiries will be accepted. The purpose of this notice is to gain knowledge of potential qualified sources and their size classification//socioeconomic status (service-disabled veteran owned small business, veteran owned small business, HUB Zone, 8(a), small business or large business), relative to NAICS 339113. Responses to this notice will be used by the Government to make appropriate acquisition decisions. Responses to this notice should include company/individual name, a service capability statement, examples of similar facilities for which you have provided services to, proof of applicable certification. DUNS number, address, point of contact and social-economic category (ex: SBVOSB, VOSB, 8(a), HUBZone, WOSB, EDWOSB, Small Business). If your firm is a Service-Disabled Veteran Owned or Veteran Owned Small Business, you must be CERTIFIED in VetBiz (see internet site: http://vip.vetbiz.gov). Contractor must be registered in System for Award Management (SAM), formerly CCR (see internet site: http://www.sam.gov). Responses to this notice must be submitted in writing via email and received not later than February 26, 2015, 2:00 PM EST. All interested parties must respond to any related solicitation announcement separately from the responses to this announcement. Email: Charline.Cox@va.gov. No telephone inquiries will be accepted.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/VA/BroVANAP/VAMD/VA24315N0501/listing.html)
- Document(s)
- Attachment
- File Name: VA243-15-N-0501 VA243-15-N-0501.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=1870132&FileName=VA243-15-N-0501-000.docx)
- Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=1870132&FileName=VA243-15-N-0501-000.docx
- Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
- File Name: VA243-15-N-0501 VA243-15-N-0501.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=1870132&FileName=VA243-15-N-0501-000.docx)
- Place of Performance
- Address: Department of Veterans Affairs;VA New York Harbor Healthcare System;423 East 23rd Street;New York, NY
- Zip Code: 10010
- Zip Code: 10010
- Record
- SN03645460-W 20150220/150218235529-8f2f52512ddc07a532400b2284554146 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |