MODIFICATION
34 -- FLEXIBLE BORON SHIELDING
- Notice Date
- 6/30/2015
- Notice Type
- Modification/Amendment
- NAICS
- 332313
— Plate Work Manufacturing
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B130, Gaithersburg, Maryland, 20899-1410, United States
- ZIP Code
- 20899-1410
- Solicitation Number
- SB1341-15-RQ-0532
- Archive Date
- 7/21/2015
- Point of Contact
- Ranae M. Armstrong, Phone: 3019758088, Lynda M Roark, Phone: 3019753725
- E-Mail Address
-
ranae.armstrong@nist.gov, Lynda.Roark@nist.gov
(ranae.armstrong@nist.gov, Lynda.Roark@nist.gov)
- Small Business Set-Aside
- N/A
- Description
- The purpose of modificaiton 001 is to provide a question and response regarding specification 3: Specification 3 - The borated sheets shall have a thickness that does not exceed 0.080" +/-0.040" (2.0mm +/_ 1.0mm) and can be bent onto a radius of 0.5" (12.7mm) or less without crackling, even at the end of its radiation exposure lifetime. (Stronger condiseration will be given to minimal thickness variations). Q: Is the specification intended to say that the average thickness is to be 0.080", with variations of +/-0.0040 is ok so as long as the average is met? A: Taking the average and keeping that at >2.0mm Al terms and conditions of this solicitation reamin unchanged and in full effect.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/SB1341-15-RQ-0532/listing.html)
- Place of Performance
- Address: National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, Maryland, 20899, United States
- Zip Code: 20899
- Zip Code: 20899
- Record
- SN03782147-W 20150702/150701000432-42773e89e7e5f5b3248db065863f0941 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |