SOURCES SOUGHT
43 -- HLD Thrust Bearing Pump and Motor Sets
- Notice Date
- 7/14/2015
- Notice Type
- Sources Sought
- NAICS
- 333996
— Fluid Power Pump and Motor Manufacturing
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Walla Walla, Attn: CENWW-CT, 201 North 3rd Avenue, Walla Walla, Washington, 99362-1876, United States
- ZIP Code
- 99362-1876
- Solicitation Number
- W912EF-15-R-SS59
- Archive Date
- 7/29/2015
- Point of Contact
- Cynthia Jacobsen, Phone: 509-527-7203
- E-Mail Address
-
cynthia.h.jacobsen@usace.army.mil
(cynthia.h.jacobsen@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- Subject: Sources Sought for the Supply and Delivery of 6 NEW Thrust Bearing Pump and Motor sets for Ice Harbor Lock and Dam located at 2763 Monument Dr., Burbank, WA 99323. Contractor shall supply and deliver 6 NEW Thrust and Bearing Pump and Motor Sets as described below SCOPE Contractor shall furnish and deliver new thrust bearing pump and motor sets to Ice Harbor Lock & Dam. Refurbished pumps shall be cause for rejection. Upon request, two sets of technical documentation, including pump performance curves, NPSHR, component specifications, motor data, mounting dimensions and sales drawings shall be submitted to the technical point of contact at site (through Contracting Office), for technical evaluation, prior to contract award. Three sets of O & M manuals shall be included with the delivery. Mechanical The pump and motor sets shall meet the following specifications. Pump and motor shall be sized to deliver turbine oil at specified flow rate and suction condition without cavitation. Pump suction will be located 6' below static fluid level (below sump). Suction piping will consist of up to 15' of 1-1/4" OD stainless steel tubing, with a suction strainer. Additional operating conditions for the turbine oil are given below: Pump Type: Heavy Duty Gear Pump Fluid: Turbine Oil (VG ISO 100) Fluid Operating Temperature: 50°F - 110°F Minimum Flow Rate: 9.7 GPM Max Rated Discharge Pressure: ≥ 2000 psi Suction Condition: Flooded Min. Suction Connection: 1-1/2" Min. Discharge Connection: 1-1/2" Connection Type: SAE J518 Code 61 4-bolt flange Gear Type: External Gear Material: 8620 alloy steel, hardened and surface ground Shaft Material: 8620 alloy steel, hardened and surface ground Shaft Seal: Flowserve Type 21 Mechanical Seal - Carbon face/Niresist mating ring/Viton Elastomer or "Approved Equal"- (Fluoroelastomer Service Temperature ≥ 200°C) O-Rings: Viton or "Approved Equal"- (Fluoroelastomer Service Temperature ≥ 200°C) Pump Bearings: AISI 52100 Roller bearings, heat treated, minimum L10 Life of 10000 Hrs @ 2000 psi Pump/Motor Coupling: C-Face Adapter Motor Voltage: 460 VAC Motor Frequency: 60 Hz Max Motor Current: 30 A Motor Connection Box Location: Top Duty Class: Continuous Frame: TEFC or TENV Mini Service Factor: 1.15 Mounting Plate: ASTM A36 Carbon Steel Each pump and motor set shall be supplied close coupled, dynamically balanced, and mounted to a solid base. The base shall be sufficiently rigid to support the motor and pump, and maintain flatness to avoid frame deflection, without the use of additional supports or members. Due to extreme environmental sensitivity, leaking seals, at any rate, shall not be acceptable. SCHEDULE Delivery shall commence no later than 45 days after the receipt of contract award. All parts and documents shall be delivered no later than 60 days after the receipt of contract award. Contractor shall make prior arrangements with the Government personnel at site to deliver and unload the equipment. THIS IS NOT A SOLICITATION. This information is for planning purposes only and is not to be construed as a commitment by the Government, implied or otherwise, to issue a solicitation or award a contract. Interested parties that respond to this sources sought announcement should submit the following information: (1) Your intent to submit a quote for this project when it is formally advertised (2) Name of firm with address, phone and point of contact. (3) CAGE Code and DUNS number or a copy of your System for Award Management (SAM) information (4) The category of small business, such as 8(a), HUBZONE, or SDVOSB etc. Interested parties should submit their responses to Cyndi Jacobsen, Contract Specialist, via email to cynthia.h.jacobsen@usace.army.mil. Your response to this notice must be received by 10:00 AM PST, July 28, 2015.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA68/W912EF-15-R-SS59/listing.html)
- Place of Performance
- Address: Ice Harbor Lock and Dam, 2763 Monument Dr., Burbank, Washington, 99323, United States
- Zip Code: 99323
- Zip Code: 99323
- Record
- SN03796300-W 20150716/150714235507-1a477483516c297e52ed6cac5e54ea1a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |