SOLICITATION NOTICE
16 -- Remanufacture of Damper Assembly
- Notice Date
- 7/16/2015
- Notice Type
- Presolicitation
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, PK/PZ Tinker AFB, 3001 Staff Drive, Ste 1AG76A, Tinker AFB, Oklahoma, 73145-3015, United States
- ZIP Code
- 73145-3015
- Solicitation Number
- FD20301501552
- Archive Date
- 9/30/2015
- Point of Contact
- Sacia Fowler, Phone: 4057394466, Shelley Moore, Phone: 405-739-4468
- E-Mail Address
-
sacia.fowler@us.af.mil, shelley.moore@us.af.mil
(sacia.fowler@us.af.mil, shelley.moore@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- All questions regarding this notice are to be submitted in writing via E-mail or Fax. All questions submitted to this office are subject to be posted in this notice along with the appropriate response(s). Vendor identities will not be disclosed. Prospective offerors must comply with all the requirements of the solicitation and any attachments thereto to be considered responsive. All offerors are to specify in their response whether it is a large business, small business, small disadvantaged business, 8(a) concern, women-owned small business, HUBZone small business, veteran-owned small business or service-disabled veteran-owned small business. Also offerors must specify whether they are a U.S. or foreign-owned firm. OMBUDSMAN (AUG 2005) (An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition.) The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 405-736- 3273. DO NOT CALL THIS NUMBERFOR SOLICITATION REQUESTS. The Government intends to issue a solicitation on or about 03 August 2015 with an estimated award date of on or about 30 September 2015. This notice does not in itself represent the issuance of a formal request for proposal and is not intended to be taken as such. The requirements set forth in this notice are defined per Purchase Request FD20301501552 as follows: Electronic procedures will be used for this solicitation. Based upon market research, the Government is not using policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested parties may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. A Firm Fixed Priced, 3 year min/max IDIQ type contract. Prequalification of sources is essential to maintain high quality and maximum operational safety. The requirements of FAR 9.202(a) apply. Sources must be qualified prior to being considered for award. Interested vendors that have not been previously approved for this acquisition must submit a Source Approval Request (SAR) package to the Source Development, Small Business Office @ 405-739-7243. As prescribed in FAR 9.202(e). The contracting officer need not delay a proposed award in order to provide a potential offeror with an opportunity to demonstrate its ability to meet the standards specified for qualification. Export Controlled Data: This acquisition may involve technology that has a military or space application. The only contractors who may participate are those that are certified and registered with the Defense Logistics Information Service (DLIS) (1-800-352-3572) and have a legitimate business purpose. In order to receive any technical data related to this acquisition, offerors must be registered with Federal Business Opportunities (FedBizOpps) www.FBO.Gov. Requests for data, drawings, and Technical Orders (TOs) should be sent directly to the PCO and/or buyer. The request shall be on company letterhead and include the applicable solicitation number and the specific data needed (e.g. TO number, drawing number). The request must be accompanied by a copy of the current and approved DD Form 2345. The form, including instructions for completing the form, is available at: http://www.dtic.mil/whs/directives/infomgt/forms/forminfo/forminfopage2220.html The Government is not responsible for misdirected or untimely requests. Applicable T.O.s Specific Technical Orders PART NUMBER REMANUFACTURE MANUAL/TO NUMBER TITLE/REVISION AND/OR OTHER DIRECTIVES (AFTO FORM 252) 68B610050-105 8A28-2-3 Overhaul Instructions with Illustrated Parts Breakdown 68B610050-105 N/A Attachment 1 of this SOW is a clarification of the IPB in the above Tech Order. General Technical Orders TO NUMBER DATE TITLE 00-5-1 15 JAN 2013 AF TECHNICAL ORDER SYSTEM 00-5-3 1 JAN 2012 AF TECHNICAL ORDER LIFE CYCLE MANAGEMENT 00-35D-54 1 NOV 2011 USAF DEFICIENCY REPORTING, INVESTIGATION AND RESOLUTION OTHER PUBLICATIONS FOR INFORMATION PURPOSES ONLY Air Force Manuals DOCUMENT NUMBER DATE TITLE AFI 23-101 8 AUG 2013 AIR FORCE MATERIAL MANAGEMENT AFMAN 23-215 6 AUG 2001 REPORTING OF SUPPLY DISCREPANCIES DoD/Air Force Forms FORM NUMBER TITLE SF 364 REPORT OF DISCREPANCY SF 368 QUALITY DEFICIENCY REPORT DD1574 DD1574-1 SERVICEABLE TAG - MATERIEL SERVICEABLE LABEL - MATERIEL DD1577-2 DD1577-3 UNSERVICEABLE (REPAIRABLE) TAG - MATERIEL UNSERVICEABLE (REPAIRABLE) LABEL - MATERIEL If unit price exceeds $5,000.00, UID requirements will apply The contractor shall provide all labor, facilities, equipment, and material to accomplish remanufacture. The work encompasses the disassembly, cleaning, inspection, maintenance, re-assembly, testing, and finishing actions required to return the item to a like new condition in accordance with the solicitation requirements and all attachments. List of applicable Line Item Numbers (LINs): **Numbering of LINs is not specific but for informational purposes only** Item: 0001 Input AS: NSN: 1680-01-009-8284RK / PN: 68B610050-103 or NSN: 1680-01-152-9530RK PN: 68B610050-105 Output AS: NSN: 1680-01-152-9530RK PN: 68B610050-105 NOUN: Damper Assembly ADDT'L DESC: Used to restrict the rate of movement of manually operated aircraft flight controls, preventing over-control. Applicable to: F-15 Item: 0001 Qty: Min 9/Max 25 Item: 0002, Basic Year Data - Not separately priced Item: 0003, Basic Year Over and Above - To be negotiated Required Delivery (referencing LINs above) a.LIN 0001: 9 unit(s) 3 EA per month beginning 30 days ARO/REP b.LIN 0002: Based on Delivery of LIN 0001 c.LIN 0003: As negotiated All questions regarding this notice are to be submitted in writing via E-mail or Fax. All questions submitted to this office are subject to be posted in this notice along with the appropriate response(s). Vendor identities will not be disclosed.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCCC/FD20301501552/listing.html)
- Record
- SN03799982-W 20150718/150716235726-5786172b1d8643d1f76de3a3f8f463b2 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |