SOURCES SOUGHT
19 -- Services & Materials for the HAYWARD Recution Gear Repair
- Notice Date
- 8/5/2015
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Philadelphia, 100 Penn Square East, Wanamaker Bldg (RM 643), Philadelphia, Pennsylvania, 19107-3390, United States
- ZIP Code
- 19107-3390
- Solicitation Number
- W912BU-15-R-0052
- Point of Contact
- Megan M. McMullen, Phone: 2156566765
- E-Mail Address
-
Megan.M.McMullen@usace.army.mil
(Megan.M.McMullen@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a Sources Sought Notice and is for INFORMATION PURPOSES ONLY. This IS NOT a REQUEST for PROPOSALS, QUOTATIONS, or BIDS. Responses to this request will not be returned. Not responding to this sources sought does not preclude participation in any future and potential solicitation. It is the intent of the Contracting Office to use this information for market research purposes only. The survey is being conducted to determine the interest of industry within NAICS code #336611 and to establish that there are adequate Large and/or Small Business (HUBZONE 8(a) or Service Disabled Veteran Owned Small Business) contractors for providing marine engine repair services. The Government WILL NOT pay for the provision of any information, nor will it compensate any respondents for the development of any such information. If a formal solicitation is released, it will be via the Federal Business Opportunities (http:www.fbo.gov). The New York District of the Corps of Engineers intends to procure the services to change out the high speed bearings on the port reduction gear aboard the M/V HAYWARD. The HAYWARD operates in the New York and New Jersey Harbor. The Government is issuing this Request for Information (RFI) to identify resources available to change out the high speed bearings on the port reduction gear on the HAYWARD. The high speed bearing change out shall be performed on the HAYWARD located at U.S. Army Corps of Engineers, Caven Point Terminal, 3 Chapel Avenue, Port Liberte, Jersey City, NJ 07305. The Contractor shall provide all labor and materials required to perform the high speed bearing change out on the port reduction gear of the USACE vessel HAYWARD. All reduction gear parts shall be Falk OEM parts, and conform to Falk dimensions, tolerances and specifications. The HAYWARD port reduction gear information is as follows: Port Reduction Gear Falk Model: 0826 MRP Ratio: 2.758 Serial Number: 7-374044-01 The port reduction gear work shall consist of the following tasks: •Disassemble the port reduction gear and remove high speed elements. •Inspect low speed gears for visual defects. (Do not remove.) •Disassemble high speed gears and measure shafts, bores and seal areas. •Assemble gear cases and measure bores to manufactures specifications. •Remove oil pump and inspect. •Clean gear case parting lines, flanges, etc. •Assemble high speed gears with new bearings and seals. (Rotating and split labyrinth seals to be cleaned, inspected and installed as original.) •Assemble high speed gear assemblies in gear housing and record end-plays and tooth contact. •Assemble oil pump as original and record back lash. •Assemble with new clutches •Install a new set of coolant hoses •Install new oil, fuel and air filters Actual quantities will be defined with issuance of the RFP The Contractor shall perform testing on the port reduction gear in accordance with the reduction gear manufacturer's requirements. All interested business concerns for this requirement may submit the following: Company name DUNS number Type of business concern (small business, large business, etc.) Years in business Statement of capability and qualifications of the organization to perform the requirement List of similar projects worked on over the past 5 years and services provided on those projects. The North American Classification System (NAICS) codes for this acquisition is #336611. ** EACH SUBMISSION SHOULD NOT EXCEED 5 PAGES TOTAL** Notice to potential contractors: All offerors who provide goods or services to the Federal Government must be registered in the System for Award Management (SAM) located on the website: https://www.sam.gov/portal/publi/SAM/#1 Additionally, all Services Disabled/Veterans Owned Business or Veterans Owned Small Business must be registered with the Department of Veterans Affairs Center of Veterans Enterprise Vet Biz Registry located at http://vip.vetbiz.gov Responses should be submitted electronically via e-mail to: Megan M. McMullen Megan.M.McMullen@usace.army.mil 215-656-6765
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA61/W912BU-15-R-0052/listing.html)
- Record
- SN03825433-W 20150807/150805235709-d36b07723301850850021d83b59e12f6 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |