SOURCES SOUGHT
47 -- Fabrication and Copper Plating of Bellow and Pipe Spools - RFI Attachments
- Notice Date
- 8/27/2015
- Notice Type
- Sources Sought
- NAICS
- 332996
— Fabricated Pipe and Pipe Fitting Manufacturing
- Contracting Office
- Department of Energy, Thomas Jefferson National Accelerator Facility, Thomas Jefferson National Accelerator Facility, 628 Hofstater Road, Suite 5, Newport News, Virginia, 23606
- ZIP Code
- 23606
- Solicitation Number
- JSA-15-R357682
- Archive Date
- 9/26/2015
- Point of Contact
- Theodore V Peshehonoff, Phone: 7572695139
- E-Mail Address
-
tvp@jlab.org
(tvp@jlab.org)
- Small Business Set-Aside
- N/A
- Description
- Attachment 3 - Draft Copper Plating specification Zipped file with Technical Specs and Drawings for the Fabrication of bellows and pipe spools Attachment 1 - Required Information Basic RFI Letter August 27, 2015 Sources Sought / Request for Information Notice LCLS-II Production Cavity String Bellows Jefferson Lab (JLab) is seeking information and sources that can provide all supervision, labor, materials, equipment, fabrication, inspection, and delivery of the Cavity String Bellows required for use in the Linac Coherent Light Source (LCLS)-II Project. The scope of the work consists of the all activities required for the fabrication, inner-surface copper plating and delivery of stainless steel beam pipes and bellow spool pieces used to connect superconducting magnets and superconducting radio frequency cavities in cryomodules being produced for the LCLS-II project. There is a requirement for approximately 350 units total consisting of two different length (short and long) bellow and two different length (short and long) pipe spools. Each unit will require copper plating of the inner surfaces. The is no design associated with this work as all fabrication and copper plating specifications will be provided by JLab. Draft versions of the fabrication drawings and copper plating specification are provided for your reference at attachment 2 and 3. Due to the extreme physical nature of the operational use of these items it is critical each component be fabricated and copper plated according to provided specifications of the final RFP when issued. The units will need to be delivered in sets consisting of seven (7) long bellows, one (1) short bellow, one (1) long pipe, and one (1) short pipe. Complete sets will be delivered to two different locations (JLab in Newport News, Virginia and Fermi Lab in Batavia, Illinois.) All inspection and quality control will be accomplished by the vendor prior to delivery but is subject to further inspection by JLab and Fermi Lab prior installation in the production cryomodules. Quality assurance guarantees and warrantees will be required. JLab intends to issue a formal solicitation on or about 15 October 2015 and subsequently award a firm fixed price (FFP) subcontract to the offeror that will provide the Best Value solution to the final requirements. First deliveries are anticipated to be required in May to June 2016 time frame. If your company has experience with similar projects and you are interested in competing for award, please register for this requirement on the Jefferson Lab Solicitation Bulletin Board. https://misportal.jlab.org/bidderportal/vendorHomePage.jsp Please submit all information requested on the attached page. In addition, w e encourage all interested vendors to submit comments and/or questions you may have whether they be business or technical. The technical specification and drawings provided are currently in "draft" form and will be finalized following this RFI, prior to the release of the Request For Proposal. Please submit a response to the information requested via email to: tvp@jlab.org and copy laney@jlab.org no later than 4:30PM Eastern Standard Time on 11 September 2015. If you have any questions, you may contact the undersigned at 757-269-5139, or e-mail tvp@jlab.org. Sincerely, Ted Peshehonoff Subcontracting Officer Attached: 1. Required Information 2. Draft Drawings (Zip File) for each bellow and pipe spool type 3. Draft Technical Specification for Copper Plating
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/TJNA/TJNA/JSA-15-R357682/listing.html)
- Record
- SN03859940-W 20150829/150828000526-dbe1b26d1d3d01c57761de802cbcd6ec (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |