MODIFICATION
53 -- MIL-DTL-1222J ITEMS
- Notice Date
- 1/6/2016
- Notice Type
- Modification/Amendment
- NAICS
- 332722
— Bolt, Nut, Screw, Rivet, and Washer Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Troop Support - Industrial Hardware, 700 Robbins Avenue, Philadelphia, Pennsylvania, 19111-5096, United States
- ZIP Code
- 19111-5096
- Solicitation Number
- SPE5EY16R0003
- Archive Date
- 2/4/2016
- Point of Contact
- Lisa Samocki, Phone: 2157379168
- E-Mail Address
-
lisa.samocki@dla.mil
(lisa.samocki@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- Changes to two (2) NSNS on the item descriptions are as follows: PIECE PART NUMBER FOR CLIN 0027, NSN 5306-01-281-9188, IS HEREBY CORRECTED TO READ M1222RN5C220GFNZE PURCHASE ORDER TEXT (POT) FOR CLIN 0049, NSN 5310-01-502-9049, IS HEREBY REVISED AS FOLLOWS: NUT, PLAIN, HEXAGON PRODUCT VERIFICATION TESTING (PVT) IS MANDATORY ITEMS SUPPLIED UNDER THIS NSN SHALL MEET ALL REQUIRED ASPECTS OF MIL-DTL-1222J, INCLUDING BUT NOT LIMITED TO: MANUFACTURING PROCESSES, MECHANICAL PROPERTIES, MARKINGS, INSPECTIONS AND EVALUATIONS ACQUISITION REQUIREMENTS: DOCUMENT: MIL-DTL-1222J, 08 DECEMBER 2000, GENERAL SPECIFICATION FOR STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED ITEM CONFIGURATION: PART NUMBER M1222N3X8C20NBNN PER APPENDIX OF MIL-DTL-1222J; TYPE III HEX NUT, 1/2-13 UNC-2B. BEARING SURFACE TO BE CHAMFERED OR WASHER FACE. DIMENSIONS SHALL BE IN ACCORDANCE WITH ASME B18.2.2. MATERIAL: SHALL BE GRADE 405 NICKEL PER TABLE 4 OF MIL-DTL-1222J VERIFICATION OF CONFORMANCE SHALL BE IN ACCORDANCE WITH SECTION 4 OF MIL-DTL-1222J. PRODUCT VERIFICATION TESTING (PVT) WILL BE PERFORMED PRIOR TO ACCEPTANCE OF EACH SHIPMENT. PRODUCT VERIFICATION TESTING (PVT) CLAUSE DLAD 52.246-9004 IS INVOKED FOR THE REFERENCED CONTRACT. PVT SAMPLES SHALL BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE CONTRACT. CRITICAL ITEM - SOURCE INSPECTION REQUIRED. ITEM SURFACE MARKING REQUIREMENT: MATERIAL SYMBOL, MANUFACTURER'S SYMBOL AND LOT NUMBER ARE REQUIRED AND SHALL BE APPLIED DIRECTLY TO THE SURFACE OF THIS ITEM IN ACCORDANCE WITH MIL-DTL-1222. MATERIAL SYMBOL SHALL BE IN ACCORDANCE WITH THE "ADDITIONAL REQUIREMENTS" COLUMN OF MIL-DTL-1222 TABLE I. LOCATION OF MARKINGS SHALL IN ACCORDANCE WITH MIL-DTL-1222J PARA. 3.13.2. THE MANUFACTURER'S SYMBOL (LOGO) MUST BE LISTED IN MIL-HDBK-57. FOR FASTENERS LESS THAN 1/2 INCH DIAMETER, IF ALL REQUIRED MARKINGS CANNOT BE APPLIED DUE TO SPACE LIMITATIONS, THE MARKINGS SHALL BE APPLIED IN THE FOLLOWING ORDER OF PRECEDENCE: MATERIAL SYMBOL, MANUFACTURER'S SYMBOL AND LOT NUMBER. MARKINGS NOT INCLUDED ON THE BARE ITEM SHALL BE PLACED ON PACKAGING LABELS. FOR MANUFACTURER'S SYMBOL INFORMATION AND INQUIRIES PLEASE VISIT THE MIL-HDBK-57 URL AT: https://www.troopsupport.dla.mil/Hardware/Technical/logoreg.asp MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award. THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING *OPEN SOLICITATION ONLY*. TO RECEIVE A COPY OF THE DRAWING(S), FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/38ad20930e86c544da336d4d8d45796d)
- Record
- SN03984569-W 20160108/160106234939-38ad20930e86c544da336d4d8d45796d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |