SOURCES SOUGHT
66 -- Ultrafast Fiber Laser System
- Notice Date
- 3/2/2016
- Notice Type
- Sources Sought
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Department of Energy, SLAC National Accelerator Lab, SLAC National Accelerator Lab, 2575 Sand Hill Road, Menlo Park, California, 94303, United States
- ZIP Code
- 94303
- Solicitation Number
- SLAC_263800(LL)
- Archive Date
- 3/17/2016
- Point of Contact
- Lorenza S. Ladao,
- E-Mail Address
-
lladao@SLAC.stanford.edu
(lladao@SLAC.stanford.edu)
- Small Business Set-Aside
- N/A
- Description
- SLAC seeks vendors that can provide the following: One (1) Each of Ultrafast Fiber Laser System with the following minimum Specifications: • Ytterbium doped Fiber laser • Repetition rate: Tunable from single shot to 40MHz (change of the repetition rate should have no impact on the beam quality) • Average optical output 50W • Energy per pulse >=200 μJ • Central Wavelength: 10305nm • Pulse duration: <300fs • Pulse-to-pulse stability < 1% rms • Pulse energy stability <0.5% over 24 hours • Beam Quality with M2<1.2 • Beam diameter <2.5mm+-10% at 1/e2 • Beam polarization ratio >100:1 • Beam Astigmatism < 50% • Beam Pointing <10% of beam diameter at 1m • Spectral bandwidth with no ripples, no pedestals • To allow the synchronization of the laser pulses with an external trigger signal provided by SPEAR3 storage ring (1.2804MHz) • Synchrolock oscillator frequency at 39.692MHz • Diode lifetime >1 year at 24/7 operation • Laser should allow a future upgrade to 100W if proper Booster Amplifier is to be used • Vendor should be certified with ISO 9001 and FDA • Prior Experience of Vendor with fiber lasers on other synchrotron radiation and XFEL facilities for x-ray pump optical laser-probe time-resolved type of measurements is needed. References will be required. • On-site installation of laser and SSRL team training • Customer support required with a response time of <48h. If this is not the case: proper training of SLAC personnel is required and additional critical spare parts at SLAC. THIS IS NOT A REQUEST FOR QUOTE. VENDORS INTERESTED IN BEING CONSIDERED AS A POTENTIAL SOURCE SHOULD IDENTIFY THEMSELVES AS AN "INTERESTED PARTY" VIA THE FBO PORTAL. DO NOT CONTACT THE SUBCONTRACT ADMINISTRATOR.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOE/SLAC/STAN/SLAC_263800(LL)/listing.html)
- Place of Performance
- Address: SLAC National Acceleratory Laboratory, Menlo Park, California, 94025, United States
- Zip Code: 94025
- Zip Code: 94025
- Record
- SN04036587-W 20160304/160302234511-b2a186b05f3550719060942e784e48c7 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |