SOLICITATION NOTICE
16 -- Lead Line & Cargo Swivel
- Notice Date
- 3/4/2016
- Notice Type
- Presolicitation
- NAICS
- 314999
— All Other Miscellaneous Textile Product Mills
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Troop Support - Construction & Equipment, 700 Robbins Avenue, Philadelphia, Pennsylvania, 19111-5096, United States
- ZIP Code
- 19111-5096
- Solicitation Number
- SPE8EG-16-R-XXXX
- Archive Date
- 3/18/2016
- Point of Contact
- Joan B. Estelly, Phone: 2157372214, Gerard J. Corcoran, Phone: 2157374248
- E-Mail Address
-
joan.estelly@dla.mil, Gerard.Corcoran@dla.mil
(joan.estelly@dla.mil, Gerard.Corcoran@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- This acquisition is for a fixed-price with an economic price adjustment, Indefinite Delivery Indefinite Quantity (IDIQ) Contract for the manufacture and delivery of the following NSNs: Line Item FSC NIIN Item Name AEQ UOI 0001 1670 010298554 Line, Lead 1000 EA 0002 1670 010298555 Swivel, Cargo 1000 EA SWIVEL,CARGO NSN 1670-01-029-8555 NFES 0526 The solicitation will be issued as a total small business set-aside acquisition, and will contain one (1) year period and four (4) one (1) year option terms. The solicitation will be fixed price with economic price adjustment. Delivery will be DLA Direct to Tracy, CA with FOB Destination. The Government required delivery schedule is 30 Days. Pricing will be submitted for the base year only. An EPA will be applied to the option years. Only FOB Destination pricing will be acceptable. Please note that the annual estimates may be revised at the time of the solicitation to provide the most accurate and up to date information possible. Once issued, the solicitation will be posted on DIBBS, https://www.dibbs.bsm.dla.mil/. All responsible sources will then be able to submit a proposal which shall be considered by DLA Troop Support. This solicitation will be evaluated on a line by line basis by Price Only. The official technical requirements will be included in any solicitation. For any questions or further details please contact: Joan B. Estelly at (215) 737-2214 or email: joan.estelly@dla.mil and Gerard Corcoran at (215) 737-4248 or email gerard.corcoran@dla.mil. This is NOT a Request for Proposal, Request for Quote, or Invitation for Bid. The Government is in no way obligated to purchase any material as a result of this notice. The estimated release date of the solicitation is March 16, 2016. The date is subject to change. A copy of the solicitation will be available via DLA Internet Bid Board System (DIBBS), https://www.dibbs.bsm.dla.mil/. All responsible sources will be able to submit a proposal which will be considered by DLA Troop Support. SWIVEL, CARGO: Shall be in accordance with Forest Service Specification 5100-501A, dated October 2003, and Amendment 2, dated June 2004. Shall have the following characteristics: First article samples(s) are required IAW 5100-501a (see 3.1.1 and 4.4.2). FIRST ARTICLE SAMPLES WILL BE SENT TO: SAN DIMAS TECHNOLOGY AND DEVELOPMENT CENTER (SDTCD) 444 EAST BONITA AVE. SAN DIMAS, CA 91773-3198 PHONE: 909-599-1267 FAX: 909-592-2309 FAT sample package requirements: Exterior of the package should clearly/boldly identify "FAT SAMPLE NSN xxxx-xx-xxx-xxxx" Address label should include the following line: ATTN: Specifications & Standards Project Leader (First Article Test Items) All supporting documents (e.g. certificate of conformance) should be included within the FAT sample package. Certification. The contractor shall provide the following information on certificates of conformance: The contractor shall prepare and provide as part of the first article inspection and upon request of any Government inspector, a certificate of conformance for the ultimate strength test. The certificate shall contain: a. Product description b. Description of the test equipment involved and the metrology information c. Manufacturer's name, address, and telephone number d. Manufacturer's lot number e. Product's date of manufacture f. Test company name, address, and telephone number g. Testing date h. Test technician's name and title i. All characteristic test values, paragraph 4.7 Unit of Issue - EA (Each) EXCEPTIONS TO 5100-501a: Page 2, paragraph 3.1.1, add the following to the end of the paragraph: "During the term of the contract the contractor shall be required to notify the contracting officer in writing when a component, or the component supplier changes in any way; and when a manufacturing location changes. The contracting officer may at any time require the contractor to submit a new first article sample when substantive changes occur during the term of the contract." Page 5, add the following new paragraphs (3.13, 3.14) and Figure 6: "3.13. No Load Free Rotation. The hook shall freely rotate when unloaded. Free rotation is defined as holding the swivel body horizontally, fully opening the jaw of the hook, rotating the swivel body at 10 rpm or less, and having the hook remain within a 135 degrees of vertical throughout multiple revolutions (See figure 6). This shall be done in both directions. See paragraph 6.9." 3.14. Rotation Under Load. The hook shall rotate freely under the rated load. Free rotation under load is defined as requiring no greater than 9 ft-lbs of torque to rotate the hook for one full revolution in each direction. See paragraph 4.10. for testing method. Paragraph 4.3.2, First Article, delete the contents and substitute the following: "The contractor shall make available to the Government items from which first articles may be selected. The Government will select 2 or 3 articles for inspection based on the number of items in the lot." Page 6, Table 1, add the following new entry: Reference Paragraph Number,,Nonconformance,,Class of Nonconformance 3.13, The hook does not swivel freely or exceed the angles from vertical as shown in figure 6.,,Major Page 7, Table 2, Change the reference paragraph numbers as indicated: *The sixth entry should be 3.11 instead of 3.12 *The seventh entry should be 3.14 instead of 3.12 *The eighth entry should be 3.12 instead of 3.13 Page 9, add the following new paragraph: "4.10. Hook Rotation Test Under Load. The following test is one method of meeting the requirement of paragraph 3.14, but other suitable methods may exist. Link two swivels together (hook to hook) with their gates closed. Place the connected swivels into a tensile tester whose capacity is at least 6,000 lbs. Attach a tool to one of the hooks, such that the tool will allow the application of torque on the bearings of swivels. Load the swivels to 6,000 lbs +/- 50 lbs. Attach a force meter (weight scale) to the torque application tool in such a manner as to be able to readily read the torque applied to cause rotation (attachment is suggested at 12 inches from the pivot point). Rotate the swivels in each direction for one full revolution, while monitoring the scale. The torque value shall not exceed 18 ft-lbs. Note: Since two swivels are involved it is assumed that the friction force is equal in both swivels. Hence the measured value may be up to twice the requirement of paragraph 3.14." Page 10, add the following new paragraph: "6.9. No Load Free Rotation. This test is a quality measure of the assembly process and not a bearing test." This item is procured in accordance with a United States Department of Agriculture, Forest Service specification. These Specifications are located at: http://www.fs.fed.us/t-d/programs/fire/specs.htm IAW BASIC NON GOVT STD 5100-501A REVISION NR A DTD 03/26/2014 PART PIECE NUMBER: LINE,LEAD NFES 0528 Unit of Issue - EA (each) LEADLINE (3000-LB): Shall be in accordance with Forest Service Specification 5100-503A June 2012 and the following characteristics: Leadline length - 12 feet (± 3 inches) (see 3.9). The leadline shall be plastic coated and the coating shall be green in color (see 3.3.3.1). Government First Article Testing Required. First article samples 3EA are required IAW 5100-503 (see 3.1.1 and 4.4.2). Send FAT Sample(s) to: San Dimas Technology and Development Center (SDTDC) 444 East Dimas, CA 91773-3198 (909) 599-1267 FAT sample package requirements: Exterior of the package should clearly/boldly identify "FAT SAMPLE NSN xxxx-xx-xxx-xxxx". Address label should include the following line: ATTN: Specifications & Standards Project Leader (First Article Test Items) All supporting documents (e.g. certificate of conformance) should be included within the FAT sample package. Certificate of conformance for the ultimate strength test. The certificate shall contain the following: a. Product description b. Description of the test equipment involved and the metrology information c. Manufacturer's name, address, and telephone number d. Manufacturer's lot number e. Product's date of manufacture f. Test company name, address, and telephone number g. Testing date h. Test technician's name and title i. All characteristic test values, paragraph 4.7 QAR will witness the LOT inspection IAW Forest Service spec 5100-503 Para 4.4.1exception to 5100-503 Each end of the cable shall be terminated using a thimble. The thimble shall be rated extra heavy or heavy duty. The contractor shall obtain and retain a certificate(s) of conformance for all the thimbles presented on leadlines meeting this specification. The terminations shall incorporate a swage. The swage shall be either stainless or carbon steel, or copper. Aluminum swages shall not be used. The wire rope shall be striped of the plastic coating before swaging. The swaged area shall not incorporate any part of the plastic coating. All swages shall be painted for slip indication as shown in figure 6. The paint color shall be red. The hook end swage shall also be similarly painted. Swages shall not be covered. No splices shall be allowed in the cable. Both terminated ends of the cable shall be fully contained within their swages and the end of the wire rope shall be flush with the swage collar or extend no more than 0.250 inches beyond the swage. In no case shall the end of the cable be contained within the swage. Change Specification 5100-503, Figure 2, Dimension A From A= 1.0" Maximum TO 1.1" Maximum. Change Specification 5100-503, Figure 4, Dimension A From A= 0.625" Maximum" TO 5/8" Nominal Dia Maximum. This item is procured in accordance with a United States Department of Agriculture, Forest Service specification. These Specifications are located at: http://www.fs.fed.us/t-d/programs/fire/specs.htm IAW BASIC DRAWING NR 14153 DUMMYDRAWING REVISION NR DTD 03/20/2012 PART PIECE NUMBER: IAW REFERENCE NON GOVT STD 5100-503 REVISION NR DTD 03/27/2014 PART PIECE NUMBER:
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCP-I/SPE8EG-16-R-XXXX/listing.html)
- Record
- SN04040350-W 20160306/160304235002-15c23443ed17d6f0deefaf6b76bfd4b0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |