SPECIAL NOTICE
51 -- WRENCH SET, COMBINATION - WRENCH SET, COMBINATION
- Notice Date
- 8/9/2016
- Notice Type
- Special Notice
- NAICS
- 332216
— Saw Blade and Handtool Manufacturing
- Contracting Office
- General Services Administration, Federal Acquisition Service (FAS), IFMIPS, 2300 Main, 6th Floor, Kansas City, Missouri, 64108, United States
- ZIP Code
- 64108
- Solicitation Number
- N7-5120-01-176-1820
- Archive Date
- 8/27/2016
- Point of Contact
- Kristi M. Mummert, Phone: 8169261883
- E-Mail Address
-
kristi.mummert@gsa.gov
(kristi.mummert@gsa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- MIL STD 129R 5120-01-176-1820 UI: SE 5120-01-176-1820 UI: SE WRENCH SET, COMBINATION DESCRIPTION In accordance with Society of Automotive Engineers Aerospace Standard AS954G, Wrenches, Hand Twelve Point High Strength, Thin Wall, dated 2011 Exception to AS954G dated 2011: Exception: Paragraph 3.7 Test Proof Loads, the following requirement shall be incorporated: Torque shall be applied with a suitable torque producing machine. Torque shall be applied at a speed of 15 deg/min to 30deg/min until proof load value is achieved; test load shall be held for 10 seconds, then torque shall be released. This proof load test shall be performed in the clockwise and counter clockwise direction.. Type II: Wrenches, Box (12-Point) Class 4: Combination, Box and Open End Wrench Style A: Regular Length Wrench Openings: The set shall consist of one (1) each of the following 15 components: 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 and 1 inch both ends Material: Steel Coating: Chrome EXCEPTION(S) TO TECHNICAL DOCUMENT Coatings: Shall be in accordance with SAE AS4984-2011; Coating Requirements for Aerospace Hand Tools. Tools in the set shall be manufactured by only one manufacturer unless otherwise specified. ITEM MARKING Each item Shall Be Marked in a Permanent and Legible Manner with: 1) Manufacturer's Part Number 2) Manufacturer's Name or Identifying Symbol, and 3) Country of Origin Each Package including the unit, single, intermediate, and exterior container must be labeled with the requisition number or Transportation Control Number (TCN). Requisition Number and TCN are found on the Purchase Order. PACKAGING One (1) set shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling and storage. MARKING All unit, intermediate, transport packages and unit loads destined for domestic civilian activities shall comply with the latest edition of FED-STD-123, Marking for Shipment (Civil Agencies). Unit, intermediate, transport packages and unit loads destined for military shall comply with the latest edition of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site: http://assist.daps.dla.mil/quicksearch/ BUY AMERICA ACT FAR 52.225.1. Please also provide 1. Manufacturer 2. Foreign or Domestic Manufacturer: If Foreign what country? 3. Small or Large Manufacturer
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/dec9183ab63b2f5dea6cb23b62a0ad95)
- Record
- SN04215272-W 20160811/160809235059-dec9183ab63b2f5dea6cb23b62a0ad95 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |