Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF AUGUST 21, 2016 FBO #5385
SOLICITATION NOTICE

60 -- Laser Beam Characterization Equipment

Notice Date

8/19/2016
 

Notice Type

Presolicitation
 

NAICS

334516 — Analytical Laboratory Instrument Manufacturing
 

Contracting Office

Department of the Air Force, Air Force Materiel Command, AFRL/RIK - Rome, 26 Electronic Parkway, Rome, New York, 13441-4514, United States
 

ZIP Code

13441-4514
 

Solicitation Number

FA8751-16-Q-0424
 

Archive Date

9/30/2016
 

Point of Contact

Tabitha Haggart, Phone: 315-330-3787
 

E-Mail Address

Tabitha.Haggart@us.af.mil
(Tabitha.Haggart@us.af.mil)
 

Small Business Set-Aside

N/A
 

Description

This is a Notice of Proposed Contract Action under FAR Part 12 Acquisition of Commercial Items and FAR Part 13 Simplified Acquisition Procedures. This notice is for information only; a solicitation will not be issued. THIS IS NOT A REQUEST FOR PROPOSAL. The associated North American Industry Classification System (NAICS) code is 334516 with a size standard of 1000 employees. AFRL requires the purchase of the following equipment: BladeCam-XHR - 1/2" CMOS System, P/N S-BC-XHR QTY-1 • HyperCal TM - Dynamic Noise and Baseline Correction software (Pat. Pending) • Port-powered USB 2.0; flexible 3 m cable, no power brick • 10-bit ADC, 4 MB image buffer & on-board microprocessor • Window-free sensors standard for no fringing • 25,000:1 electronic auto-shutter, 40 µs to 1000 ms • 1,000:1 SNR (30/60 dB Optical/Electrical) • Field-replaceable image sensors • M² option - beam propagation analysis, divergence, focus Wavelength Standard camera: 355 to 1150 nm Pixel Count‚ H x V 3.1 Mpixel‚ 2048 x 1536 Image Area 6.5 x 4.9 mm Pixel Dimension 3.2 x 3.2 µm Min. Beam (10 pixels) ~32 µm Shutter Type Rolling Max. Full Frame Rate ~10 Hz Max. 'Every Pulse' PRR N/A Single Pulse Capture PRR ~20 kHz Signal to RMS Noise 1‚000:1 (Opt./Elec.* dB) (30/60* dB) Dynamic Range 43 dB Electronic Shutter + ND + SNR 113** dB (2.10¹¹:1) ADC 10-bit (1‚024 levels) Measurable Sources CW beams Software configurable Auto-trigger‚ Synchronous & Variable Delay Measured Beam Powers See the Saturation Power Graph‚ page 5 of the datasheet Electronic Dynamic Range CW: 44 dB (25‚000:1) electronic shutter Manual Beam Attenuation Provided ND-1‚ ND-2‚ ND-4 C-mount Neutral Density filters Displayed Profiles Line‚ 2D & 3D plots. Normalized or un-normalized. Linear or Logarithmic‚ Zoom x10 2D‚ 3D in 10‚ 32 or max. colors or grayscale Contoured display at 10 and 32 colors Measured & Displayed Profile Parameters Raw and smoothed profiles Triangular running average filter up to 10% FWHM Beam Diameter Diameter at two user set Clip levels Gaussian & ISO 11146 Second Moment beam diameters Equivalent diameter above a user defined Clip level Equivalent Slit and Knife Edge diameters Beam Fits Gaussian & Top Hat profile fit & % fit Equivalent Slit profile Beam Ellipticity Major‚ Minor & Mean diameters. Auto-orientation of axes. Centroid Position Relative and absolute Intensity Weighted Centroid and Geometric Center Beam Wander Display and Statistics Measurement Accuracy (not limited to pixel size) 0.1 µm processing resolution for interpolated diameters. Absolute accuracy is beam profile dependent - ~1 µm accuracy is frequently achievable. Centroid accuracy is also beam dependent (as good as ±1 µ since it is arithmetically determined from all pixels above the centroid clip level). Processing Options Image & profile Averaging‚ 1‚ 5‚ 10‚ 20‚ Continuous. Background Capture and Subtraction. User set rectangular Capture Block for capture User set or Auto ellipse Inclusion region with beam tracking for processing *.ojf files save all WinCamD custom settings for particular test configurations Update Rates ~5 Hz maximum for full frame‚ full screen. Higher for small Capture Blocks Pass/Fail display On-screen selectable Pass/Fail colors. Ideal for QA & Production. Log Data and Statistics Min.‚ Max.‚ Mean‚ Standard Deviation‚ to 4096 samples Relative Power Measurement Rolling histogram based on user's initial input. Units of mW‚ µJ‚ dBm‚ % or user choice (relative to a reference measurement input) Fluence Fluence‚ within user defined area Certification RoHS‚ WEEE‚ CE Multiple Cameras 1 to 8 cameras, switchable. Head Dimensions‚ Width x Height x Depth 46 x 46 x 16.5 mm (1.8 x 1.8 x 0.65") with 5 mm ND filter holder Optical depth from housing/filter to sensor (no window) ±0.2 mm 4.0/ 8.5 mm (verify before purchasing) Mounting 1/4"-20 holes aligned with sensor center. 4-40 holes on camera rear. Weight‚ Camera Head 85 g (3 oz) Beam'R2 - XY Scanning Slit System, P/N S-BR2-DD QTY-1 • Beam diameters 5 µm to 4 mm, to 2 µm in Knife Edge mode • Port-powered USB 2.0; flexible 3 m cable, no power brick • 0.1 µm sampling and resolution • Linear & log X-Y profiles, centroid • Profile zoom & slit width compensation • M² option - beam propagation analysis, divergence, focus Wavelength Si + InGaAs detectors: 190 to 1800 nm Scanned Beam Diameters Si detector: 5 µm to 4 mm‚ to 2 µm in Knife-Edge mode InGaAs detector: 10 µm to 3 mm‚ to 2 µm in Knife-Edge mode Beam Waist Diameter Measurement Second moment (4s) diameter to ISO 11146; Fitted Gaussian & TopHat 1/e² (13.5%) width User selectable % of peak Knife-Edge mode for very small beam Measured Sources CW; Pulsed lasers‚ Φ µm ≥ [500/(PRR in kHz)] Resolution Accuracy 0.1 µm or 0.05% of scan range ± < 2% ± = 0.5 µm Maximum Power & Irradiance 1 W Total & 0.5 mW/µm² Gain Range 1‚000:1 Switched; 4‚096:1 ADC range Displayed Graphics X-Y Position & Profiles‚ Zoom x1 to x16 Update Rate ~5 Hz Pass/Fail Display On-screen selectable Pass/Fail colors. Ideal for QA & Production. Averaging User selectable running average (1 to 8 samples) Statistics Min.‚ Max.‚ Mean‚ Standard Deviation Log data over extended periods XY Profile & Centroid Beam Wander display and logging M2DU-BR2 Linear Stage for BR2 scanning systems, P/N M2DU-BR2 QTY-1 • Fully compliant ISO 11146 • 200 steps per revolution • Speed to 100 mm/ sec • Resolution < 1 μm • Repeatability < 4 μm • USB 3.0/ 2.0 interface • DataRay software controlled • RoHS and CE compliant LBS-15 Polarization Preserving Laser Attenuator, P/N LBS-15 • CW or Pulsed beams 10 mW- 40W • Preserves polarization state • Negligible wavefront distortion • Wedge design eliminates ghosting and multiple reflections Wavelength Range: 0.4-2.5 μm Average Attenuation: 103 Aperture: 17.5 mm Max Beam Diameter: 15 mm Wedge Material: UV FS EAM-2 Variable Attenuator, P/N EAM-2 QTY-1 • Schott NG absorbing filter glass (NG). • Filters are laser grade polished to 10-5 scratch-dig and /10 finish. • Filters are mounted at a 4° angle to suppress back-reflection interference fringes. Max. attenuation: 93 dB (OD=9) Min. attenuation: 0 dB Max. Power Density: Power: 1W/cm² Energy: 100mJ/cm² Transmission of filters: See table Wavelength range: 350 to 2200 nm * Clear Aperture: 18mm Angle: 4° Mounting: 3 x M6 threaded C-Mount thread Neutral Density Filters P/N NDSET QTY-2 • Set of 6 stackable ND (Neutral Density) filters in 2,640,000 • C-mount threaded, stackable holder for use with WinCamD, bladeCam, and TaperCamD-UCD12 cameras • Includes ND 0.5, 1, 2, 3, 4, 5. Includes caps with alignment targets. Filters are mounted at 3" to axis. The Government intends to negotiate a sole-source contract with the manufacturer of the required system: DataRay Inc. 1675 Market Street Redding, CA 96001 The Government has made a determination that no other company has commercial offerings that can meet the requirement, as the required system is the only known source that manufactures a scanning slit beam profiler with sensors simultaneously covering 190 to 1750 nm wavelength (S-BR2-DD) and allowing thorough characterization of beams down to two micron waist. This is a notice of proposed contract action and NOT a request for competitive proposals. However, all responsible sources may submit a capability statement or proposal, which shall be considered by the agency. Responses to this notice must be submitted by the date/time listed on the notice. Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government in future procurements. Responses received will be evaluated; however a determination by the Government not to compete the proposed procurement based upon responses to this notice is solely within the discretion of the Government. The Government anticipates an award date on or before 16 September 2016 A Sole Source Justification will be attached to the subsequent Notice of Award in accordance with applicable regulation.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/AFRLRRS/FA8751-16-Q-0424/listing.html)
 

Place of Performance

Address: Department of the Air Force, Air Force Materiel Command, AFRL – Rome Research Site, AFRL/Information Directorate, Rome, New York, 13441, United States

Zip Code: 13441
 

Record

SN04232517-W 20160821/160819235001-28967b51e1243e5275086d197fa6e2a7 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |