MODIFICATION
99 -- Saw Cut Blanks Aluminum
- Notice Date
- 4/3/2017
- Notice Type
- Modification/Amendment
- NAICS
- 332710
— Machine Shops
- Contracting Office
- Department of the Army, Army Contracting Command, ACC - NJ (W15QKN), BUILDING 10 PHIPPS RD, PICATINNY ARSENAL, New Jersey, 07806-5000, United States
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN-17-Q-0063
- Archive Date
- 4/18/2017
- Point of Contact
- William Tenz,
- E-Mail Address
-
william.d.tenz.civ@mail.mil
(william.d.tenz.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- The purpose of this amendment is to answer the following vendor question: Question 1: The saw cut blanks will have a sharp edge, burr. Do we need to break all the edges on this block? Answer: The 173 each Saw Cut Blanks shall be deburred. Question 2:Can these be cut via a water jet? Answer: The Saw Cut Blanks cannot be cut via a water jet. The saw cut blanks must be saw cut in accordance with the drawing attached to the notice. All other terms remain the same.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/4f274cbe2fc76a10495a1927ba11ac66)
- Record
- SN04457464-W 20170405/170403234835-4f274cbe2fc76a10495a1927ba11ac66 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |