DOCUMENT
65 -- Surgical Instruments - Attachment
- Notice Date
- 6/1/2017
- Notice Type
- Attachment
- NAICS
- 339112
— Surgical and Medical Instrument Manufacturing
- Contracting Office
- Angel C Rhone;Department of Veterans Affairs;Network Contracting Office 6;100 Emancipation Drive;Hampton VA 23667
- ZIP Code
- 23667
- Solicitation Number
- VA24617Q1188
- Response Due
- 6/8/2017
- Archive Date
- 7/8/2017
- Point of Contact
- Angel C Rhone
- Small Business Set-Aside
- N/A
- Description
- THIS IS A SOURCES SOUGHT NOTICE ONLY. This notice does NOT constitute a request for proposal, request for quote, or invitation for bid. No formal solicitation document exists at this time. We are seeking information for market research purposes only. The Government will not pay for any information solicited. The VHA Network Contracting Office 6 (NCO 6) is conducting a market survey to find qualified vendors who can provide the following item(s) for the WG Hefner Department of Veterans Affairs Medical Center (VAMC), 1601 Brenner Ave, Salisbury, NC 28144: 1 KLEINSASSER MINI FORCEPS WITH ROUND 1MM CUP JAWS, STRAIGHT, WL:23CM 2 KLEINSASSER MINI FORCEPS WITH ROUND 1MM CUP JAWS CURVED LEFT, WL:23CM 3 KLEINSASSER MINI FORCEPS W/ROUND 1MM CUP JAWS CURVED UP + LEFT, WL:23CM 4 KLEINSASSER MINI FORCEPS WITH ROUND 1MM CUP JAWS CURVED RIGHT, WL:23CM 5 KLEINSASSER MINI FORCEPS W/ROUND 1MM CUP JAWS CURVED UP + RIGHT, WL:23CM 6 KLEINSASSER CUTTING FORCEPS WITH ROUND 2MM CUP JAWS CURVED UP + LEFT, WL:23CM 7 KLEINSASSER MINI LARYNGEAL SCISSORS STRAIGHT, WORKING LENGTH:23CM 8 KLEINSASSER MINI LARYNGEAL SCISSORS ANGLED 45 º, WORKING LENGTH:23CM 9 KLEINSASSER MINI LARYNGEAL SCISSORS CURVED RIGHT, WORKING LENGTH:23CM 10 KLEINSASSER MINI LARYNGEAL SCISSORS CURVED LEFT, WORKING LENGTH:23CM 11 SINUS INSTRUMENT STERILIZATION TRAY, 19.75" X 14.5" X 9.5" (WDH) The kit part number is composed of the following products: 39312A SINUS INSTRUMENT STERILIZATION TRAY, 19.75"X 14.5" X 9.5" 12 KLEINSASSER LARYNGEAL CUTTING FORCEPS W/ROUND 2MM CUP JAWS, STRAIGHT,WL:23CM 13 KLEINSASSER CUTTING FORCEPS WITH ROUND 2MM CUP JAWS, CURVED UP, WL:23CM 14 KLEINSASSER CUTTING FORCEPS WITH ROUND 2MM CUP JAWS CURVED LEFT, WL:23CM 15 KLEINSASSER CUTTING FORCEPS WITH ROUND 2MM CUP JAWS CRVD UP AND RIGHT, WL:23CM 16 KLEINSASSER CUTTING FRCPS W/2MM CUP JAWS CRVD UP+RIGHT, STRAIGHT CUT EDGE, WL:23CM 17 KLEINSASSER CUTTING FRCPS W/2MM CUP JAW CRVD UP + LEFT,STRAIGHT CUT EDGE,WL:23CM 18 KLEINSASSER CUTTING FORCEPS W/2MM CUP JAWS,HORIZ OPEN TO RIGHT, STRGHT,WL:23CM 19 LARYNGEAL CUTTING FORCEPS WITH ROUND 4MM CUP JAWS CURVED LEFT, WL:23CM 20 LARYNGEAL CUTTING FORCEPS WITH ROUND 4MM CUP JAWS CURVED UP, WL:23CM 21 LARYNGEAL CUTTING FORCEPS WITH ROUND 4MM CUP JAWS CURVED RIGHT, WL:23CM 22 KLEINSASSER LARYNGEAL SCISSORS,STRAIGHT WORKING LENGTH:23CM 23 KLEINSASSER LARYNGEAL SCISSORS ANGLED 45 º, WORKING LENGTH:23CM 24 KLEINSASSER LARYNGEAL SCISSORS CURVED RIGHT, WORKING LENGTH:23CM 25 KLEINSASSER LARYNGEAL SCISSORS CURVED LEFT, WORKING LENGTH:23CM 26 KLEINSASSER LARYNGEAL SCISSORS, STRAIGHT HORIZONTAL CUTTING, WORKING LENGTH:23CM 27 KLEINSASSER ALLIGATOR FORCEPS W/O RATCHET, STRAIGHT, SERRATED, WL:23CM 28 KLEINSASSER ALLIGATOR FORCEPS, CURVED RIGHT,W/O RATCHET, WORKING LENGTH:23CM 29 KLEINSASSER ALLIGATOR FORCEPS,CRVD LEFT W/O RATCHET, SERRATED, WL:23CM 30 KLEINSASSER ALLIGATOR FORCEPS,CRVD UP W/O RATCHET, SERRATED, WL:23CM 31 KLEINSASSER SUCTION TUBE, W/CUTOFF HOLE, Ø: 2MM, LENGTH: 23CM 32 SINUS INSTRUMENT STERILIZATION TRAY, 19.75" X 14.5" X 9.5" (WDH) The kit part number is composed of the following products: 39312A SINUS INSTRUMENT STERILIZATION TRAY, 19.75" X 14.5" X 9.5" All interested parties should respond, in writing via email to angel.rhone@va.gov. No telephone inquiries will be accepted. In response, please include the following: Company/individual name, Address, Point of contact with phone number Information describing your interest, Indicate FSS/GSA contract number or Open Market, as applicable FSS Category you qualify for Tax ID number DUNS number Capabilities statement Company Socio-Economic SIZE (example large, small, SDVOSB, VOSB, WOSB etc.) If your firm is a Service-Disabled Veteran Owned or Veteran Owned Small Business, you must be CERTIFIED in VetBiz (see internet site: http://vip.vetbiz.gov). The NAICS 339112 Surgical and Medical Instrument Manufacturing is applicable to this acquisition; with a size standard of 1,000 Employees. Interested firms are reminded that in accordance with FAR 4.1201(a) Prospective contractors shall complete electronic annual representations and certifications at the System for Award Management (SAM) as a part of required registration in conjunction with FAR 4.1102(a) that states, Prospective contractors shall be registered in the (SAM) database prior to award of a contract or agreement. Therefore, due to time constraints, vendors must be registered in System for Award Management (SAM) at http://www.sam.gov to be considered for an award. Your response is required by 1:00 PM EST on June 8, 2017.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/VA/HaVAMC/VAMCCO80220/VA24617Q1188/listing.html)
- Document(s)
- Attachment
- File Name: VA246-17-Q-1188 VA246-17-Q-1188.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3544723&FileName=VA246-17-Q-1188-000.docx)
- Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3544723&FileName=VA246-17-Q-1188-000.docx
- Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
- File Name: VA246-17-Q-1188 VA246-17-Q-1188.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=3544723&FileName=VA246-17-Q-1188-000.docx)
- Record
- SN04528947-W 20170603/170601235220-df3e5e1bddc6dead9d1ff3d04ad1e994 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |