Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF AUGUST 06, 2017 FBO #5735
SOLICITATION NOTICE

66 -- carbon coater and necessary accessories

Notice Date
8/4/2017
 
Notice Type
Combined Synopsis/Solicitation
 
NAICS
334516 — Analytical Laboratory Instrument Manufacturing
 
Contracting Office
Department of Health and Human Services, National Institutes of Health, National Institute of Child Health and Human Development, Contracts Management Branch, 6710B Rockledge Dr., Suite 1124, MSC7000, Bethesda, Maryland, 20892-7510, United States
 
ZIP Code
20892-7510
 
Solicitation Number
NIH-NIDDK-17-218
 
Archive Date
8/29/2017
 
Point of Contact
Amber Harris, Phone: 3014028778
 
E-Mail Address
amber.harris@nih.gov
(amber.harris@nih.gov)
 
Small Business Set-Aside
N/A
 
Description
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation and a separate written solicitation will not be issued. This solicitation number is NIH-NIDDK-17-218 and is issued as a Request for Quotation (RFQ). The solicitation/contract will include all applicable provisions and clauses in effect through Federal Acquisition Circular 2005-95. The North American Industry Classification (NAICS) Code is 334516 and the business size standard is 1,000. However, this solicitation is not set aside for small business. This acquisition is being conducted using Simplified Acquisition Procedures in accordance with FAR Part 13. Eunice Kennedy Shriver National Institute of Child Health and Human Development (NICHD) intend to procure on a sole source basis with TED PELLA INC of PO BOX 492477, Redding, CA 96049-2477 for the purchase of a carbon coater and necessary accessories. The National Institute of Digestive, Diabetes & Kidney Diseases's (NIDDK) Multi-Institute Cryo-EM Facility (MICEF) has a requirement to obtain services to install a Cressington 208C high vacuum Turbo carbon coating instrument located in building 8. Ted Pella Inc. is the only US sales representative of the manufacturer and the only authorized dealer for providing service to the Cressington 208C carbon coater. This carbon coater will be able to assist in TEM imaging by adding a coating of carbon to a sample. Adding the carbon to the sample takes away the metal sputter coating particles that can become visible at higher magnifications. The carbon coater equipment is sold by Ted Pella Inc., they are the only US sales representative of the manufacturer and the only authorized dealer for providing service to the Cressington 208C carbon coater. The Laboratory of Cell and Molecular Biology (LCMB) and other Laboratories in NIDDK use electron microscopy to image intercellular structures in cells and tissues. Before samples can be visualized with electron microscopy they must be cut into very thin slices, typically 50-200 nm in thickness. The carbon coater is used to apply a thin carbon layer to non-conductive samples prior to TEM imaging, and is suitable for imaging at higher magnifications where metal sputter coating particles become visible. The specs are as follows: Cressington 208C High Vacuum Turbo Carbon Coater for TEM • Carbon Rod Evaporation Source • Automatic and manual evaporation control (0-200A) • Feedback controlled power supply with digital setting and vacuum safety interlock • Telescopic top-plate support • Automatic or manual control • Analog vacuum and Amps display • Ø150 x 165mm vacuum chamber with static sample table • Fully integrated all-metal dry vacuum pumping system with Turbo Pump 80 liters/sec with stainless backing lines and 3.6m3/hr Dry Scroll Pump (3.5 x 10-1mBar) • High/low vacuum metering system • Penning & Pirani gauges with auto change-over Preshaped Carbon Rods, pk/10 Evaporation Viewing Glass PELCO Bell Jar Kleen TM, 14 oz. Carbon Rod Slider Springs for Bradley Carbon Source, pk/5 Copper Braids for Bradley Carbon Source, pk/5 Ceramic Insulators for Bradley Carbon Source MTM-10 Thickness Monitor (for Cressington 108 Coaters)--Includes Vacuum feedthrough, crystal holder, oscillator box, connection cables,test crystal, instructions. SPECIFICATIONS: General: Microprocessor based 4 digit display, push button zero 6MHz crystal with lifetime check, 5 times per second update rate Thickness display range: 0-999.9nm (positive/negative) Resolution: 0.1nm (gold or carbon) Density range: 0.50 - 30.00 gm/cm3 Crystal: 12.5mm (1/2") dia. Tooling factor range: 0.25 - 8.0 Data change facility: Four sets of value can be stored in memory under Density and four under Tooling Thickness Monitor Crystals, pk/10 PELCO easiShaper TM Carbon Rod Shaper System, 100-240V -Carbon Rod Sizes: ¼", 3/16", 1/8" -Shaped steps: Single or double steps -Cutting blades/speed: 2350 rpm -Collector capacity: 56ml/2ozfl -Weight: 2.07kg / 4.6lbs Carbon Rods, Grade 1 Spec-Pure, ¼" x 12" (6.15 x 305mm), 60Hz Installation and Instructional Training The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under authority of the 41 U.S.C. 253(c) (1), FAR 6.302. Only one responsible source and no other supplies or services will satisfy agency requirements. The offeror must include a completed copy of the provision of FAR Clause 52.212-3, Offeror Representations and Certifications - Commercial Items with its offer. The provisions of FAR Clause 52.212-1 Instructions to Offerors - Commercial Items; FAR Clause 52.212-2, Evaluation - Commercial Items; FAR Clause 52.212-4, Contract Terms and Conditions - Commercial Items; and FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items - Deviation for Simplified Acquisitions applies to this acquisition. The offeror must include their Dun & Bradstreet Number (DUNS), the Taxpayer Identification Number (TIN), and the certification of business size. The clauses are available in full text at http://www.acquisition.gov/far/. Interested vendors capable of furnishing the government with the services specified in this synopsis should submit a copy of their quotation to the below address or via email to amber.harris@nih.gov. Offers must also be accompanied by descriptive literature, delivery timeframe, warranties and/or other information that demonstrates that the offer meets all the foregoing requirements. Quotations will be due on or before August 14, 2017 by 10 am, EST. via email or postal mail. The quotation must reference "Solicitation number" NIH-NIDDK-17-218. Quotations sent by postal mail or other mailing services must be submitted to the following address: Eunice Kennedy Shriver National Institute of Child Health and Human Development, 6710B Rockledge Drive, Room 1159A, Bethesda, MD 20817. Attention: Amber Harris, by the date and time mentioned above. Any questions must be sent via email to amber.harris@nih.gov and must include solicitation#NIH-NIDDK-17-218 in the subject line of email. Faxed copies/responses will not be accepted. PLEASE NOTE: In order to receive an award, contractor must be registered for "All Awards" and have a valid certification in the System for Award Management (SAM) database at http://www.sam.gov.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/HHS/NIH/NICHD/NIH-NIDDK-17-218/listing.html)
 
Place of Performance
Address: BETHESDA, Maryland, 20892, United States
Zip Code: 20892
 
Record
SN04613684-W 20170806/170804231753-544078dc3c48294a0ead4f2a52bc2295 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.