SOLICITATION NOTICE
39 -- WHEELED EXCAVATOR
- Notice Date
- 8/29/2017
- Notice Type
- Presolicitation
- NAICS
- 333924
— Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, ECC, 409th CSB (W912PB) RCO Bavaria, UNIT 28130, APO AE, 09114, Germany
- ZIP Code
- 00000
- Solicitation Number
- W912PB-17-T-3214
- Archive Date
- 9/27/2017
- Point of Contact
- Ricardo Colon Acevedo, Phone: 4909641838809, Andrea Schottenhammel, Phone: 4909641838728
- E-Mail Address
-
ricardo.colonacevedo.civ@mail.mil, andrea.schottenhammel.ln@mail.mil
(ricardo.colonacevedo.civ@mail.mil, andrea.schottenhammel.ln@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- BASIC EXCAVATOR:  Engine type: Deutz turbocharged 4-cylinder diesel engine - TCD3.6L4  Engine power: 85.0 kW / 115.6 hp  Emission Rating: Interim Tier 4  1st Programmable auxiliary Piping Kit long arm, with control circuit (flow liters); with proportional Control + AB  2nd Programmable auxiliary Piping Kit long arm, circuit with proportional control  3rd Additional auxiliary Piping Kit long arm, for hydraulic quick-coupler  4th Programmable additional auxiliary Piping Kit long arm, (pressure and flow of liters) with proportional control (electric power changeover)  Additional hydraulics installed to the dipper stick with high pressure shut-off valves  Automatic idle speed reduction system  Full indicator in the display and on the tank  Electric refueling pump with automatic shutdown  Cruise control  Gas pedal for travel speed  Adjustment boom  Hose-burst check valve, to help minimize cylinder drift and maintain load control in the event of a hose failure on the lifting, dipper stick and middle adjusting cylinder.  Cushioned main boom, arm and swing cylinders.  The boom and dipper arm have an overload warning device (IAW European standard EN 474-5 load safety device)  Dipper stick length: 2130 mm  Swing arm angle (L / R): 70 ° / 60 °  Comfort cabin ROPS, Radio, Climate control  Working headlights: 6 each  Rear warning lights red: 2 each  Back up lights: 2 each  Separate 24 V socket at the cabin roof  Air-suspended driver's seat  One-Key system for all locks  Pressure relief valve and accumulator for auxiliary hydraulics  Automated hydraulic tank pressure valve  Power assist for work and driving hydraulics  Automatic change-over valve for unpressurized return line for hydraulic breaker operation  Separate driving hydraulic pump  Load sensing hydraulic system  Automatic swing axle lock  Dual tires, 8 each (8.25 - 20 14 PR)  Tool box with tools and safety devices  Battery main switch  Rear view camera  Loading and transport tie downs: 4 pcs.  Dozer blade with parallel guide - Width 2300 mm; Height: 500 mm DIMENSIONS:  Overall Length on road: 5,020 mm  Transport Height: 3,010 mm  Overall Width: 2,335 mm  Undercarriage Overall Length: 3,745 mm  Tail swing Radius: 1,690 mm  Ground Clearance: 320 mm  Dozer Blade Height: 500 mm  Dozer Blade Width: 2,300 mm  Digging Depth: 4,415 mm  Dump Height: 6,480 mm  Reach at Ground Level: 7,555 mm PERFORMANCE:  Slew Motor: Constant Vol Piston  Slew Speed: 10.1 rpm  Travel Speed: 20 kph  Bucket Digging Force: 58.9 KN  Long Arm Digging Force: 39,7 KN  Gradeability: 35 %  Main Pumps: Variable piston x 2, double gear x 1  Set Pressure: 275 bar  Hydraulic flow: 176+156+59.6+43.1+40.3+35.6+15.4 liters  Total hydraulic flow: 526 liters  Auxiliary Flow / Hi Flow: 70 / 120 Liters FLUID CAPACITY (ES):  Fuel Tank: 162 liters  Ad Blue Tank: 10 liters  Hydraulic System: 200 liters  Mechanical quick coupler - Type MS08 with Symlock-System and load hook Bei der Version V2 mit hydr. Schnellwechsler das eintragen (M=mechanisch; H= hydraulisch):  Hydraulic quick coupler - Type HS08 with Symlock-System and load hook Note: All buckets must be with Symlock adapters - meaning; all buckets are reversible, and must be complete and ready to use.  1 each - Heavy Duty Digging Bucket; width 400mm, rated capacity 130 liters, with knife  1 each - Heavy Duty Digging Bucket; width 600mm, rated capacity 216 liters, with 4 teeth's  1 each - Heavy Duty Digging Bucket; width 800mm, rated capacity 305 liters, with 5 teeth's  1 each - Hydraulic ditch cleaning bucket, with piston-rod protection, swing angle of 2 x 45°; width 1500 mm, rated capacity 280 liters  1 each - Lehnhoff hydraulic clamshell bucket; endless turn able with HPX drive-system, without Cylinders, Width 800 mm, rated capacity 300 liters, with 6 teeth's; complete with hoses and Hydraulic quick connectors to the excavator hydraulic lines, adapter plate for MS08 Including pendulum brake  1 each - Drilling and Auger drive, for up to drill diameter 600 mm; complete with hoses and hydraulic Quick connectors to the excavator hydraulic lines, with adapter plate for MS08, including 1 Each drill diameter 200 mm - length 1240 mm; and 1 each drill diameter 300 mm - length 1240 mm. The wheeled excavator conforms to all EU directives and is TÜV, BG-BAU, STVZO and CE-certified Warranty:  Manufactures warranty: 12 months DOCUMENTATION:  Operator manual  Spare Parts list  Road licensing certificate
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/1b1a3272542140c32d04168ccc3deffa)
- Place of Performance
- Address: USAG ANSBACH (DPW), 5843 C HELIOPORT KASERNE BLDG 5805, ANSBACH, Non-U.S., 91522, Germany
- Record
- SN04653211-W 20170831/170829234549-1b1a3272542140c32d04168ccc3deffa (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |