SOLICITATION NOTICE
38 -- Road Line Marker Machine - Solicitation
- Notice Date
- 9/5/2017
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 333924
— Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing
- Contracting Office
- Department of the Army, Army Contracting Command, ECC, 411TH CSB (W90VN8) RCO CAMP HUMPHREYS, Unit #15289, APO, Non-U.S., 96205-5289, Korea, South
- ZIP Code
- 00000
- Solicitation Number
- W90VN8-17-T-0040
- Point of Contact
- Kerry G. Blasingim, Phone: 823157548346
- E-Mail Address
-
kerry.g.blasingim.civ@mail.mil
(kerry.g.blasingim.civ@mail.mil)
- Small Business Set-Aside
- N/A
- Description
- Full solicitation for this acquisition. This is a brand name or equal solicitation for a Retech RTLM-600 road line marking machine and various subcomponents. The full solicitation is attached, but the salient characteristics are as follows: Brand Name or Equal for Retech RTLM-600, RTLM-10, RTLM-15, RTLM-30, RTLR-13 - Main chassis shall be a specialized truck with a payload of 2.5 tons or more and a side power gate with a loading capacity meeting or exceeding 800 kg. - 170 HP or greater diesel engine rated EURO 6 for exhaust gas emission - Vehicle safety system featuring top-mounted LED warning light bar with siren system and LED arrow light bar on the read of the tank - Thermoplastic paint preheater (RTPT-600 or equivalent) with: o Auxilliary 10+ horsepower diesel engine o 2 x 500+ kg paint tanks o LPG gas burner paint heater with a 12.5 min per kg or better burn speed o Powered mixing screw driven by hydraulic motor o 4 x 50kg LPG tanks with steel-plated tops - Walk-Behind-Type Line Marker (LM1) (RTLM-10 or equivalent) with: o Paint capacity 15+kg o 10kg LPG gas tank with steel-plated top o 10cm (4-inch) marking shoe - Walk-Behind-Type Line Marker (LM2) (RTLM-15 or equivalent) with: o Paint capacity 15+kg o 10kg LPG gas tankw ith steel-plated top o 15cm (5.9-inch) marking shoe - Walk-Behind-Type Line Marker (LM3) (RTLM-30 or equivalent) with: o Paint capacity 40+kg o Bead bin capacity 8+kg o 10kg LPG gas tank with steel-plated top o 30cm (11.8-inch) marking shoe - Line Remover Machine (RTLR-13 or equivalent) with: o Bead bin capacity 12+kg o 24/69-pin and 48/60-pin bits - Each of the above components must be mounted or mountable to the vehicle as provided and without additional changes to the configuration of any component or of the vehicle - Accesories to be provided: Crossing liner x 1, Center liner x 1, Pedestrian cross liner x 1, Steel plate liner x 1, LPG gas tanks with holders: 50kg x 6, 10kg x 5 (the tops of all LPG tanks shall be covered with weather-proof steel plate - All repair manuals and documentation must be provided in English and Korean language, including Service Manual, Parts Manual, and Electrical Schematics - Tool box and fire extinguisher must be attached/included - Must include a warranty of at least 2 years after delivery date - All parts and components must be from original manufacturer; no aftermarket parts will be accepted
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/16dc554df5eca3ccc9ae47f0bfc4169b)
- Place of Performance
- Address: U.S. Army LRC - Humphreys, Supply & Service Division, AMB Warehouse, Bldg #S-1018, Unit #15801, Pyeongtaek, Korea, South
- Record
- SN04662583-W 20170907/170905232716-16dc554df5eca3ccc9ae47f0bfc4169b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |