Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 21, 2017 FBO #5781
SOURCES SOUGHT

47 -- bellows, pressure - Market Survey

Notice Date
9/19/2017
 
Notice Type
Sources Sought
 
NAICS
336413 — Other Aircraft Parts and Auxiliary Equipment Manufacturing
 
Contracting Office
Defense Logistics Agency, DLA Acquisition Locations, DLA Land and Maritime, P O Box 3990, Columbus, Ohio, 43218-3990, United States
 
ZIP Code
43218-3990
 
Solicitation Number
SPE7M317R0022
 
Archive Date
10/7/2017
 
Point of Contact
mandy l. phipps-kuhlman, Phone: 6146928675
 
E-Mail Address
mandy.phipps-kuhlman@dla.mil
(mandy.phipps-kuhlman@dla.mil)
 
Small Business Set-Aside
N/A
 
Description
Market Survey DLA Land and Maritime is preparing to solicit a one-time buy for 150 EA each, NSN 4730-00-294-1566, bellows, pressure. The approved manufacturers and part numbers for this NSN are: Fulton Bellows (1RDH5) p/n 083863A0001 FMH (99755) p/n 16235-3 Boeing (76301) p/n ST7M255-1 DLA Land and Maritime does not possess technical data for this NSN. Sources interested in becoming an approved source for this NSN must submit the appropriate information as outlined in Procurement Notes L04 - Offers for Part Numbered Items and M06 - Evaluation of Offers for Part Numbered Items. Sources interested in providing an offer on this solicitation should complete the attached market survey and return the completed copy to Mandy Phipps-Kuhlman via email at mandy.phipps-kuhlman@dla.mil by 4:00 PM EST on 09/22/2017. BELLOWS,PRESSURE...STAINLESS STEEL BELLOWS, RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES COPPER ALLOY FITTING,BRONZE BELLOWS HEAD,APPL TO CANOPY SEAL PRESSURIZATION SYSTEM F-TF AND 15A AIRCRAFT. USED ON F-18 AIRCRAFT. Casting/forging may be required to manufacture this NSN. If a casting/forging is required, tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE OFFERS IS NOT AVAILABLE AT THE PROCUREMENT AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND ALTERNATE PART FOR EVALUATION. A forging process was identified as a means to manufacture this item. Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil;(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil CRITICAL APPLICATION ITEM FULTON BELLOWS & COMPONENTS INC. 1RDH5 P/N 083863A0001 FMH Aerospace Corp. DBA F M H 99755 P/N 16235-3 BOEING COMPANY, THE DBA BOEING 76301 P/N ST7M255-1 IAW REFERENCE DRAWING NR 76301 ST7M255 REVISION NR F DTD 08/02/1990 PART PIECE NUMBER: PKGING DATA-QUP:001 SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951. Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply: •,,All Section "D" Packaging and Marking Clauses take precedence over ASTM D3951. •,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be "CP" Commercial Pack. •,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCC/SPE7M317R0022/listing.html)
 
Record
SN04685196-W 20170921/170919232742-9ce10445aea9d66e701e9fc9e299b277 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.