SOURCES SOUGHT
83 -- Material for the shoulder reinforcement piece (1641 USG) and the material for the front fusible (TG3) on dress coats - Sources Sought
- Notice Date
- 11/2/2017
- Notice Type
- Sources Sought
- NAICS
- 313310
— Textile and Fabric Finishing Mills
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, DLA Troop Support - Clothing & Textiles, 700 Robbins Avenue, Philadelphia, Pennsylvania, 19111-5096, United States
- ZIP Code
- 19111-5096
- Solicitation Number
- SPE1C1-16-D-1036
- Archive Date
- 11/24/2017
- Point of Contact
- Kyle Maccia, Phone: 2157370565
- E-Mail Address
-
kyle.maccia@dla.mil
(kyle.maccia@dla.mil)
- Small Business Set-Aside
- N/A
- Description
- Seeking sources sought for manufacturers that can produce the material for the shoulder reinforcement piece (1641 USG) and the material for the front fusible (TG3) on dress coats. DLA Troop Support is seeking sources sought for manufacturers that can produce the material for the shoulder reinforcement piece (1641 USG) and the material for the front fusible (TG3) on dress coats. The specifications for these materials are listed below: Specifications: MIL-C-44296A MIL-C-15065J The specification documents can be viewed at the following website: https://assist.daps.dla.mil/quicksearch/ Pattern/ Number 1641 USG Contents 57% Cotton 43% Polyester Fabric Type Plain Weave Finish Width 61" +/- 1" Finish Weight 4.8 oz/ yd2 (+/-.25 oz) Shrinkage 1.5% (+/-.5%) (TT049016-C) Construction 52 EPI x 38 PPI Yarn Size Warp: 16/1 OE Filling: 350 Denier Polyester Monofilament Quality: T3G Width: 65 ¾" Colors: Black APPLICATION: Government Uniforms (Army/Navy/Airforce) Menswear : Fusible Front Fusible Reinforcement CLEANING: Dry-Cleaning COMPOSITION WEIGHT IN G/M2 BASE Viscose : 86% Polyester : 14% 91 WARP Polyester : 100% WEFT Viscose : 100% COATING Polyamide MESH: 17 17 TOTAL 108 FUSING CONDITIONS Flat bed press Continuous press ACTUAL TEMPERATURE 140/150 degrees C 140/150 degree C GLUELINE 127 degrees C 127 degrees C PRESSURE 350/500 g/cm2 3 / 4 Bar TIME 12 / 14 s 12 / 14 s All items must be Berry Amendment Compliant. In accordance with "Section 833 of the National Defense Authorization Act for Fiscal Year 2006 Act added language to 10 U.S.C. 2533a requiring that all articles or items of "clothing", including the materials and components thereof, purchased by the Department of Defense be grown, reprocessed, reused, or produced in the United States, other than sensors, electronics, or other items added to, and not normally associated with, clothing (and the materials and components thereof)." Therefore, all components must be of domestic origin in compliance with DFARS clause 252.225-7012, Preference for Certain Domestic Commodities (June 2010). In an effort to ascertain interest, the Government is seeking interested vendors to produce the subject material. Response date is on or before November 9, 2017 at 3:00PM Local Time. If you are interested or have any questions please send an e-mail to kyle.maccia@dla.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCP-C/SPE1C1-16-D-1036/listing.html)
- Record
- SN04729991-W 20171104/171102231312-c28cf69ddd5efbe04dcee5f0a1e2da55 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |