SPECIAL NOTICE
51 -- Multiplier, torque wrench - RFQ
- Notice Date
- 12/27/2017
- Notice Type
- Special Notice
- NAICS
- 332216
— Saw Blade and Handtool Manufacturing
- Contracting Office
- General Services Administration, Federal Acquisition Service (FAS), IFMPS, 2300 Main, Kansas City, Missouri, 64108, United States
- ZIP Code
- 64108
- Solicitation Number
- 5120-01-312-1269
- Archive Date
- 1/5/2018
- Point of Contact
- Dana M Karlin, Phone: 816-823-2300
- E-Mail Address
-
dana.karlin@gsa.gov
(dana.karlin@gsa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- Quote form Small business set aside. 5120-01-312-1269 UI: EA MULTIPLIER, TORQUE WRENCH DESCRIPTION In accordance with U.S. Army Tank-Automotive Command drawing number 12369294, dated March 29, 1988. EXCEPTION(S) TO TECHNICAL DOCUMENT Mark each tool in a permanent and legible manner with drawing number, manufacturer's name or identifying symbol, and country of origin ITEM MARKING Each item Shall Be Marked in a Permanent and Legible Manner with: 1) Manufacturer's Part Number 2) Manufacturer's Name or Identifying Symbol, and 3) Country of Origin Each Package including the unit, single, intermediate, and exterior container must be labeled with the requisition number or Transportation Control Number (TCN). Requisition Number and TCN are found on the Purchase Order. PACKAGING One (1) item shall be preserved and packaged in a unit package designed to protect the item against damage during shipment, handling, and storage. MARKING All unit, intermediate, transport packages and unit loads destined for domestic civilian activities shall comply with the latest edition of FED-STD-123, Marking for Shipment (Civil Agencies). Unit, intermediate, transport packages and unit loads destined for military shall comply with the latest edition of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site: http://assist.daps.dla.mil/quicksearch/ SPECIAL REQUIREMENTS FOR SHIPMENTS TO ALL COUNTRIES THAT HAVE ENDORSED THE IPPC GUIDELINES FOR TREATMENT OF NON-MANUFACTURED WOOD PACKAGING: The International Plant Protection Convention (IPPC) has approved and published Guidelines for Regulating Wood Packaging Material in International Trade. Countries endorsing the IPPC Guidelines are found at the USDA website usda.gov. General Services Administration Acquisition Manual (GSAM) Clause 552.211-89 requires non-manufactured wood pallets and other non-manufactured wood packaging material used to pack items for delivery to or through IPPC countries be marked and properly treated in accordance with IPPC guidelines. In addition, pallets and packing material will comply with DLAD 47.305-1, Compliance with European Union (EU) Restrictions Involving Non-Manufactured Wood Packaging (NMWP) and Pallets and MIL-STD-2073-1, Standard Practice for Military Packaging. HAZARDOUS MATERIAL SHIPMENTS: Packing of hazardous material (HM) supplies for shipments shall comply with the GSAM clause/provision 552.223-73 Preservation, Packaging, Packing, Marking and Labeling of Hazardous Materials (HAZMAT) For Shipments. That is packing of HM for domestic shipments shall comply with the latest versions of DOT HMR in 49 CFR, parts 171-180, and OSHA HCS in 29 CFR, part 1910.1200. Packing of HM for export shipments (includes forwarding and container and consolidation points, commercial freight forwarders and third party logistics providers) shall comply with the latest versions of DOT HMR in 49 CFR, parts 171-180, and OSHA HCS in 29 CFR, part 1910.1200, and the applicable IMDG, IATA, ICAO, AFMAN-24, standard for the mode of transportation. Items requiring Safety Data Sheets (SDSs) shall be provided by the contractor as specified in IPD and the FAR Provision/Clause 48 CFR 52.223 3 Hazardous Material Identification and Material Safety Data, and the latest version of Federal Standard 313. One copy of the SDS shall be included inside or affixed to the outside of each transport package. If affixed outside the SDS must be placed in a weather resistant envelope. UNIT PACKAGES: The unit packages shall be packed in a close fitting fiberboard box in compliance with the Uniform Freight Classification and the National Motor Freight Classification requirements of Rules, Item 222, Sec. 3., Minimum 200 psi, or Edge Crush Test (ECT) 32 Lbs. per Inch Width.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/a3155160bcd30c6742301ea2b97659b4)
- Record
- SN04776646-W 20171229/171227230653-a3155160bcd30c6742301ea2b97659b4 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |