Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF JANUARY 27, 2018 FBO #5909
DOCUMENT

65 -- Services Associated with BH Bldg. 31 Project - Attachment

Notice Date

1/25/2018
 

Notice Type

Attachment
 

NAICS

337127 — Institutional Furniture Manufacturing
 

Contracting Office

Department of Veterans Affairs;NCO22-Gilbert Network Contracting;777 E. Missouri, Suite 300;Phoenix AZ 85014
 

ZIP Code

85014
 

Solicitation Number

36C25818Q0166
 

Response Due

1/30/2018
 

Archive Date

3/31/2018
 

Point of Contact

LOUIS R WADE
 

E-Mail Address

5-4475<br
 

Small Business Set-Aside

Service-Disabled Veteran-Owned Small Business
 

Description

644-18-1-056-0004 (Product)/644-18-1-256-0019 (Services) Building 31 Statement of Work Canvas System for Behavior Health Phoenix VA Health Care System 650 E. Indian School Road Phoenix, AZ 85012 602-277-5551 The C&A requirements do not apply, a Security Accreditation Package is not required. STATEMENT OF SERVICES This project involves the procurement and installation of modular furniture systems for 37 rooms in Building 31 s Behavior Health Clinic to accommodate the increasing FTE requirement. This clinic is part of the Phoenix VA Health Care System (PHOVAMCS). GENERAL SCOPE The general scope of this project is to procure, manufacture, and install Herman Miller Canvas Systems into 37 rooms that include (11) 1-person offices, (21) 2-person offices, (1) 4-person office, and (2) 5-person offices. VA not will supply a disposal location for waste. The VA will supply restroom facilities for the contract crew. The items listed below describe what is required. It is incumbent upon the potential bidder to investigate the site for any items required for this project not listed here. This procurement package is Sole Source to Match Existing for Canvas System Furniture: Herman Miller Healthcare (GS-28F-8049H / GS-03F-036DA). PROJECT OVERVIEW IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO ABIDE BY ALL LOCAL ORDINANCES GOVERNING THE PROJECT LOCATION. Installation timeframe will be scheduled between the hours of 4:30am-12:00pm Monday-Friday (may vary); or 6:00am-2:30pm M-F. Excluded overtime and weekend work. Coordinate installation date/s with the Phoenix VA Interior Designer/COR. The clinic is located on the North side of the main facility. Installation to be completed by 1/19/2018 Contractor must be able to complete each room and demobilize per these expected and approximate timeframes. Contractor must supply a detailed staffing and project schedule. Delivery Lead Times may be staggered to accommodate specific timeframes on call indicated by VA designer to be stored by manufacturer/dealer and delivered during the specified timeline intervals. Manufacturing requirements: The manufacturer shall be expected to provide commercial grade furniture to meet the design intent shown in the attached specifications sheets. Manufacturer shall meet with the construction, and warranty requirements as outlined in these specifications. Lead time should be within industry standard of 4-6 weeks from receipt of order. Design Efforts required: The VA Interior Design department has completed the drawings, programming, and interior design selection for the Building 31 Project at the Phoenix VA Healthcare System. The VA interior designer/COR may appoint a team lead for the installation project and the awarded vendor is to resource this staff member for information or clarification; aside from the project manager/designer/COR. Vendor to provide their own tools to complete the project. GENERAL INFORMATION The Certification and Accreditation requirements do not apply and a Security Accreditation Package is not required and there is no sensitive information to protect. This specification establishes the minimum requirements for the acquisition and installation of a complete and usable system of modular systems furniture. All product and components will be new; refurbished product will not be accepted. All products will be commercial grade furniture for healthcare and commercial use. All products that are wall-mounted, will be plumb/square with wall/floor. Substitutions of the finishes and fabrics shown in the product pages shall NOT be accepted. Pricing shall include these exact finishes and fabrics as either Graded-In or COM as chosen by the VA Interior Designer. The Contractor shall coordinate the installation with the interior designers. All on site contracting personnel must have identification on them at all times on site. The Contractor shall coordinate the work with the interior designer/COR/designated representative. Product quantities have been provided for convenience only. It is the responsibility of the vendor to review all drawings and confirm correct quantities prior to order. The documents provided are for quotes and are NOT intended to be used as final installation drawings. PDF format drawings are included. PRODUCT AND VENDOR DATA Include with Submittal documents (in paper and PDF format as indicated in Submissions Section above): Provide two (2) copies of detailed CAP worksheet indicating parts and finishes. Include part number, and quantities, price each and extended price for each line. All applicable warranties. Estimated delivery times. Delivery method (Trucks direct to site, trucks to warehouse, unpackaged, then delivered to site, etc.) DO NOT SUBMIT: Technical specification books Company brochures DELIVERY, STORAGE AND HANDLING All products shall be delivered to the jobsite. Storage of product prior to installation is vendor s responsibility. There shall be a staging area provided at the project site. Product is vendor s responsibility until the Phoenix VA Interior Designer/COR accepts complete installation. WARRANTY WARRANTY INFORMATION provided needs to indicate the length, what is covered, and the usage that warranty covers and must meet or exceed the following criteria: Warranties for furniture will meet or exceed Herman Miller Healthcare warranties. 12 years, 3 shifts, labor included. Including electrical components, casters, pneumatic cylinders, tilts, and all moving mechanisms. Warranty work is performed in the U.S., at Herman Miller expense. Warranties shall be signed by the authorized representative of the contractor. Warranties accompanied by document authenticating the signer as an authorized representative of the guarantor, shall be presented to the owner upon the completion of the project. The vendor shall guarantee that the modular furniture products are free from any defects in workmanship from the date of delivery/installation. SCHEDULE DELIVERY AND INSTALLATION Coordinate delivery and installation of items with the Phoenix VA Interior Designer/COR. The installation shall occur Monday-Friday between the hours of 4:30am-12:30pm, EXCEPT TUESDAYS. Install time must be included in bid quote but be listed as separate line items-total product cost-with separate costs for GSA contract and open market; cost for install; total for all. Products will ship to vendor facility; not VA Target installation completion by January 19, 2018 Delivery Lead Times may be staggered to accommodate specific timeframes on call indicated by VA designer to be stored by manufacturer/dealer and delivered during the specified timeline intervals. Contractor must be able to complete each room and demobilize according to these expected and approximate timeframes. Contractor must supply a detailed staffing and project schedule for each phase of this project. Protect doors, doorways, and corridor walls use for delivery and installation. Contractor is responsible for repair of these areas for any damage caused by the Contractor. All services shall be installed by certified technicians in accordance with manufacturer s recommended installation instructions. A punch list walk through shall be performed with the contractor s representative. Items on the punch list shall be noted and a response for completion time (expected date of completion) of each item shall be provided from the contractor. CLEANING All packaging material and debris shall be removed from the site and properly disposed of by the contractor. Upon completion of installation prior to the punch list walk through, all products shall be cleaned and dusted and the area shall be left in a clean neat condition and ready for occupancy. Any defects in material from installation shall be repaired and damaged products that cannot be satisfactorily repaired shall be replaced. VENDOR OBLIGATIONS Bid quote-to include itemized price list, service time and design/specification time Warranty information WORK REQUIREMENTS Secure VA Temporary Badge and security clearance for all contractors, scheduled through VAMC PIV Office room # 1148D-2. Phone 602-277-5551 x4990. Contractors must have valid identification. Leave all work areas in clean and orderly condition.
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/PhVAMC/HMC/36C25818Q0166/listing.html)
 

Document(s)

Attachment
 

File Name: 36C25818Q0166 36C25818Q0166.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4042131&FileName=36C25818Q0166-000.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4042131&FileName=36C25818Q0166-000.docx

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Place of Performance

Address: Department of Veterans Affairs;Department of Veterans Affairs;650 E. Indian School Rd.;Phoenix AZ

Zip Code: 85012
 

Record

SN04799337-W 20180127/180125231028-9f648e1b986824f676d28a99e3cad81f (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |