SOLICITATION NOTICE
C -- Construction Phase Support Services (CPSS) in the CENTCOM AOR
- Notice Date
- 3/9/2018
- Notice Type
- Presolicitation
- NAICS
- 541330
— Engineering Services
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, USACE District, Louisville, Attn: CELRL-CT, PO Box 59, Louisville, Kentucky, 40201-0059, United States
- ZIP Code
- 40201-0059
- Solicitation Number
- W912QR18R0029
- Point of Contact
- Magdalena Bernard, Phone: 5023156215
- E-Mail Address
-
magdalena.bernard@usace.army.mil
(magdalena.bernard@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- 1. GENERAL CONTRACT INFORMATION: This contract is begin procured in accordance with the Brooks A-E Act as implemented in FAR Subpart 36.6. Firms will be selected for negotiations based on demonstrated competence and qualifications for required work. NAICS code for this procurement is 541330. This announcement is open to all businesses. The proposed services, which will be obtained by negotiated firm fixed price contracts, are for a variety of architect/engineer (A/E) construction phase support services on projects within the CENTCOM AOR for the USACE Transatlantic Middle East District and its customers. One (1) Indefinite Delivery/Indefinite Quantity contract will be awarded. The maximum cumulative contract value for the contract is $75,000,000. The contract period is for a base year and up to four (4) one-year options. Projects will be awarded by individual task orders. There is no minimum or maximum on the amount of individual task orders, except the overall contract value will not be exceeded. The following factors will be used in deciding which contractor will be selected to negotiate task orders: performance and quality of construction phase support services, current capacity to accomplish the work in the required time, and uniquely specialized experience. Significant emphasis will be placed on the A/E firm's ability to manage concurrent projects in multiple locations. Secondary selection criteria will be used as a tiebreaker between firms considered as technically equal. The estimated start date is December 2018. In accordance with FAR 36.604 and supplements thereto, and upon final acceptance or termination, all task orders above $35,000 will receive a performance evaluation. A performance evaluation may be prepared for lesser task orders and interim performance evaluations may be prepared at any time. Performance evaluations will be maintained for use in future source selections for A/E services. 2. PROJECT SPECIFIC INFORMATION: The following are major work elements that would be included in this requirement. These lists are not all encompassing. Perform review of project submittals, including drawings and specifications, design calculations, and shop drawings. Provide responses to Requests for Information (RFIs) submitted by the construction contractor. Review Value Engineering Change Proposals (VECPs), including validating acceptance of changes in methods and/or materials and confirming estimated amounts for the VECP. Participate in project site visits, including having Professional Engineers and Registered Architects conduct on-site inspections as requested during critical construction activities to ensure contract compliance. Provide on-site Quality Assurance Representative services, to include inspection and oversight of construction activities. Provide an updated Construction Schedule as the project progresses through construction, including critical path updates and three-week look-ahead scheduling. Perform field and laboratory testing of construction materials. 3: SELECTION CRITERIA: Selection criteria in descending order of importance are listed below. "a" through "d" are primary, and "e" is secondary. a) Professional Qualifications: The government's evaluation of professional qualifications will consider education, training, certifications, registrations, overall experience, relevant experience, and longevity with the firm. b) Specialized Experience and Technical Competence: The government's evaluation of Specialized Experience and Technical Competency will consider example projects in the SF330 Section F which include Specialized Experience and Technical Competencies below. The government will also consider the same Specialized Experience and Technical Competencies of individual team members in SF330 Section E. 1. Construction Phase Support Services on projects in CENTCOM AOR, including review of design submittals, RFI evaluation and response, VECP evaluation, construction activity quality assurance, and project scheduling. Contracts may be with USACE, other entities. 2. Engineering Design projects in the CENTCOM AOR, excluding Iraq and Afghanistan. 3. Management support services for construction, renovations repairs, and additions to institutional and industrial facilities type projects located on Military facilities throughout the CENTCOM AOR. c) Capacity: The government's evaluation of the offeror's capacity narrative included in the Design Quality Management Plan in SF330 Section H will consider the offeror's ability to complete the work in the required time with the understanding that this contract may require multiple team members to work multiple task orders at various locations simultaneously. Offerors should include a narrative on any existing offices and/or personnel they have operating in the CENTCOM AOR. d) Past Performance: Past performance of the A-E, joint venture partners, and key subcontractors on Department of Defense (DoD) and other contracts with respect to cost control, quality of work, and compliance with performance schedules, as determined from Past Performance Information Retrieval System (PPIRS), Contractor Performance Assessment Report System (CPARS) and other sources. e) Volume of Contract Awards in the last 12 months. 4.) SUBMISSION REQUIREMENTS: Offerors must submit four (4) hard copies and one (1) electronic copy on CD of the SF 330, Part l, and one copy of the SF330, Part II for the prime firm. Each branch office that will have a key role in the proposed contract must also submit a copy of the SF 330 Part II. Offerors must submit a current and accurate SF 330, Part II, for each proposed sub-consultant. Any firm with an electronic mailbox responding to the solicitation should identify such address in the SF 330, Part I. Please identify the Dun & Bradstreet number of the office(s) performing the work in Block 5 of the SF 330, Part I. Dun & Bradstreet numbers may be obtained by contacting (866) 705-5711, or via the internet at http://fedgov.dnb.com/webform. The proposal shall be submitted as one file using Microsoft Word (.doc) or Adobe Acrobat (.pdf). Font size shall be 10 or larger on white letter-sized paper (8 inches by 11 inches). The SF 330 will be no longer than 100 pages in length (excluding the SF 330, Part IIs) and Section H will be 20 pages or less in length. Each printed side of a page will count as one page. The data on the CD shall not substitute for the hard copy submission. Do not furnish design portfolios, prints, magazines, newspaper clippings, or CDs of completed projects. All requirements of this notice must be met for a firm to be considered responsive. Additional instructions and clarifications for SF330: SF330 Section D: The offerors shall submit an organizational chart as required by SF330 Section D. SF330 Section E: The individuals identified by the project roles on the SF330 may not have multiple duties or be "dual-hatted." Offerors shall provide individual resumes for a minimum of three (3) personnel in SF330 Section E for each of the individuals listed below in lines 1 through 5. Individuals included in SF330 Section E must possess the certifications and/or registrations listed below and must have performed in their respective role (i.e. project manager, scheduler, etc.) on projects similar to those listed in Paragraph 2 of this solicitation. The individual's experience for the amount of time listed below applies to experience related to the position described and can include years working prior to registration/licensure/certification. For disciplines #1-3 and 5 listed below, offerors shall designate a Senior-Level professional. For Senior-Level engineers or architects, those individuals shall be a Registered Professional in their field, with a minimum of 10 years of experience. The other two (2) individuals in each discipline shall be designated as Mid-Level Engineers/Architects, and shall have a minimum of five (5) years of experience. All individuals shall have an ABET-accredited college degree in their field or a technical field related to architecture or engineering. Other professionals shall have a minimum of ten years of experience in their respective positions. The evaluation will consider education, certifications, registration, and overall and relevant experience. Additional consideration will be given to proposals offering additional professional registrations within their team, for significant experience beyond what is requested. And for professionals with graduate degrees. 1. Project Manager (can be an Architect or Engineer) 2. Construction Manager 3. Data Manager 4. Quality Assurance Representative 5. Project Engineer/Architect 6. Construction Scheduler 7. Security Manager SF330 Section F: For all projects included in SF330 Section F, all must be substantially complete. Projects must demonstrate the specialized experience and technical competence of the prime firm, joint venture partners, consultants, and key subcontractors. The Offeror shall submit a maximum of ten (10) projects in total; all ten (10) projects must be completed within the last five years, from the date of this solicitation, in the types of projects specifically indicated above in paragraph 2, PROJECT SPECIFIC INFORMATION. The effectiveness of the proposed project team (including management structure; coordination of disciplines, offices and/or subcontractors; and prior working relationships) will also be examined. Project descriptions should show explicit experience pertinent to this announcement. If more than ten (10) projects are submitted, only the first ten (10) projects listed in the proposal will be evaluated. Each project example should include the following information: which prime firm, partner, consultant or key subcontractors executed the project, a description/narrative of the project, scope, location, contract dollar award amount and final dollar cost, the start date, original contract finish date, the actual finish date, customer POC with current phone number and email information. Projects should also list any key personnel that worked on the submitted projects. Indefinite Delivery, Indefinite Quantity (IDIQ) Contracts, where numerous Task Orders are listed together, are not acceptable as projects. Rather each Task Order would be considered a project. SF330 Section H: In SF330 Section H, include an evaluation of performance from the client/owner for all example projects included in SF330 Section F. Performance evaluations will not be counted against the 20 page limit of SF330 Section H or the 100 page limit for the entire SF330. In SF330 Section H, each offeror shall present a Quality Management Plan including an explanation of the firm's management approach; management of sub-consultants (if applicable); quality control/assurance procedures; procedures to insure that internal resources are not over committed; and an organizational chart showing the inter-relationship of management and various team components (including sub-consultants). The Quality Management Plan shall also include a Capacity Narrative describing the offeror's ability to complete the work with available resources. Also in Block H indicate the estimated percentages involvement of each firm on the proposed team or describe the type of work and roles the prime and subcontractors will perform under this contract. It is the responsibility of the Prime Contractor to comply with FAR 19.508(e) and 52.219-14. At least 50% of the cost of the contract performance incurred for personnel must be expended for employees of the prime firm. The 50% self-performing requirement will be based on the contract as a whole. Release of firm status will occur within 10 days after approval of any selection. All responses on SF 330 to this announcement must be received no later than 2:00 p.m. local time on 17 April 2018. No other general notification to firms under consideration for this project will be made. Facsimile transmissions will not be accepted. Solicitation packages are not provided and no additional project information will be given to firms during the announcement period. To be eligible for award, a firm must be registered in the System for Award Management (SAM) database, via the SAM Internet site at https://www.sam.gov. Submit responses to US Army Corps of Engineers, Louisville District, ATTN: Magdalena Bernard 600 Dr. Martin Luther King Jr. Pl., Room 821, Louisville, KY 40202. Contracting Office Address: USACE District, Louisville, 600 Dr. Martin Luther King, Jr. Place, Room 821, Louisville, KY 40202 Place of Performance: USACE District, Transatlantic Middle East, 201 Prince Frederick Drive, Winchester, VA 22601 Point of Contact(s): Magdalena Bernard @ 502-315-6215; magdalena.bernard@usace.army.mil USACE District, Louisville
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA27/W912QR18R0029/listing.html)
- Place of Performance
- Address: Virginia, United States
- Record
- SN04849858-W 20180311/180309231333-6ef3b3f937be76e233df994f65e20164 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |