Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF MARCH 25, 2018 FBO #5966
SOLICITATION NOTICE

22 -- 2K 3K Railcar Floor Panels - IFB FQ18157

Notice Date

3/23/2018
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

336510 — Railroad Rolling Stock Manufacturing
 

Contracting Office

Washington Metropolitan Area Transit Authority, Procurement and Materiels, PRMT-JGB, 600 5th Street, Washington, District of Columbia, 20001
 

ZIP Code

20001
 

Solicitation Number

FQ18157
 

Archive Date

4/26/2018
 

Point of Contact

Robert Jones, Phone: 2029626406, Cathy Rooths, Phone: 2029622469
 

E-Mail Address

rjones5@wmata.com, crooths@wmata.com
(rjones5@wmata.com, crooths@wmata.com)
 

Small Business Set-Aside

N/A
 

Description

IFB FQ18157 - 2K 3K Railcar Floor Panels Introduction •The objectives of this acquisition is to purchase various sizes of 2/3K railcar floor panels. •The outcomes desired by WMATA is to replace 2/3K railcar floor panels that have become worn and defective. •Benefits of this acquisition to WMATA are to improve reliability and durability of the 2/3K flooring to extend the life expectancy of the 2K/3K fleets. Background The 2K/3K floor panels are separating and are creating a safety hazard for revenue passengers and maintenance personnel. CENV has developed a BOM to replace the floor panels that will eliminate this safety hazard and extend the life of the 2K/3K fleets. Current Scope of Work •The successful vendor is expected to deliver floor panels listed in the table below. Deliverables •The successful vendor shall deliver floor panels in quantities stated below: •Initial quantities of 30 panels will be delivered for a First Article Inspection (FAI). •Vendor will submit with the FAI panels, a complete set of signed, dated and stamped drawings and documentation used to build, inspect and test the panels. •Vendor will submit with the FAI panels an inspection report for the production of the FAI panels. Performance and Acceptance Criteria •Vendor must ship an initial quantity of 30 floor panels for a First Article Inspection (FAI). •Floor panel plywood core shall be constructed per the National Institute of Standards and Technology Voluntary Product Standards PS 1-95 for Construction of Industrial Plywood (with typical APA trademarks) and SMP-209-D, Section 3.1.1 (Page 107). •Plywood bonding preparation shall comply with SMP 209-D, Section 3.1.4 (Page 109). •Adhesive used to manufacture the panels shall comply with SMP 209-D, Section 3.1.5 (Page 109) including the strength referenced in SMP 209-D, Section 3.2.5 (Page 110). •Complete floor panels must comply with all requirements of WMATA drawing WDL000831, Rev B (Page 106). •Vendor shall include with the FAI panels, a complete set of signed, dated and stamped drawing used to build, inspect and test the panels to WMATA's drawing. Technical Specifications •Floor panels shipped must comply with WMATA drawing #WDL000831, Rev B and referenced sections of SMP 209-D. •All sharp edges must be smooth and free of burrs. •Stainless steel skins may only extend up to core edge or at a minimum of 0.09" short of edge, exposing no more than 0.09" plywood. •There should be no joints or seams in the stainless steel skins. Performance Schedules •Vendor must ship 30 panels for the First Article Inspection (FAI) within 30 days after receipt of the order. •FAI and operational quantities will be shipped to Brentwood Rail Facility, 601 T Street NE. Washington D.C. 20018-1009, ATTN: Wayne Bolander. •Floor Panels shall be wrapped in plastic and boxed to prevent damage during transit. Location of work and any constraints •Manufacturing of the floor panels will be performed at the vendor's location. Delivery Schedule •FAI requirements o30 days after receipt of purchase order Panel # 102 - 10 (FAI) Panel #113 - 10 (FAI) Panel #000 - 10 (FAI) Operational requirements 30 days after purchase order award Panel #102 - 100 panels Panel #113 - 50 Panels Panel #000 - 50 Panels o120 days after purchase order award Panel #102 - 100 panels Panel #113 - 50 Panels Panel #000 - 50 Panels
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/WMATA/WMATA01/WMATAPRMT01/FQ18157/listing.html)
 

Place of Performance

Address: Brentwood Rail Facility, 601 T Street NE., Washington, District of Columbia, 20018-1009, United States

Zip Code: 20018-1009
 

Record

SN04865283-W 20180325/180323231359-a831e9c1a23a7a7cf94819572b870d45 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |