Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF APRIL 06, 2018 FBO #5978
SOURCES SOUGHT

66 -- Lab Supplies - Salient Characteristics

Notice Date

4/4/2018
 

Notice Type

Sources Sought
 

NAICS

423840 — Industrial Supplies Merchant Wholesalers
 

Contracting Office

Department of the Army, Army Contracting Command, ACC - APG (W911QX) Adelphi, 2800 Powder Mill Road, Building 601, Adelphi, Maryland, 20783-1197, United States
 

ZIP Code

20783-1197
 

Solicitation Number

W911QX-18-T-0129
 

Archive Date

4/26/2018
 

Point of Contact

Frankin H. Hamilton, Phone: 5756784963
 

E-Mail Address

franklin.h.hamilton2.civ@mail.mil
(franklin.h.hamilton2.civ@mail.mil)
 

Small Business Set-Aside

N/A
 

Description

(1) Action Code : SOURCES SOUGHT This is a Sources Sought Notice only. This is not a request for proposal, but a survey to locate potential sources. This Sources Sought does not constitute an Invitation for Bids, Request for Proposals, or a Request for Quotations, and is not to be construed as a commitment by the Government to issue an order or otherwise pay for the information solicited, nor is it a guarantee of a forthcoming solicitation or contract. It is for market research purposes only. Respondents will not be notified of the results of the evaluation. The purpose of this Sources Sought Notice is to gain knowledge of interest, capabilities, and qualifications of various members of industry, to include the Small Business Community: Small Business, Section 8(a), Historically Underutilized Business Zones (HUB-Zone), Service-Disabled Veteran-Owned Small Business (SDVOSB), Women-Owned Small Business (WOSB), and Economically Disadvantaged Women-Owned Small Business (EDWOSB). The Government must ensure there is adequate competition among the potential pool of responsible contractors. Small business, Section 8(a), HUBZone, SDVOSB, WOSB, & EDWOSB businesses are highly encouraged to participate. (2) Date : 04/04/2018 (3) Classification Code : 6640 (4) NAICS Code: 423840 (5) NAICS Size Standard: 100 Employees (6) Contracting Office Address: Room 216 Building 1622 White Sands Missile Range (WSMR), NM 88002 (7) Subject: Sources Sought for Lab Supplies (8) Proposed Solicitation Number: W911QX-18-T-0129 (9) Sources Sought Closing Response Date: 04/11/2018 (10) Contact Point: Franklin Hamilton, Contract Specialist, 575-678-4963, Franklin.h.hamilton2.civ@mail.mil (11) A. Objective: To find sources that are qualified to meet the supplies/services as listed in section 11B. Note that the specific requirements in section C are subject to change prior to the release of any solicitation. B. Salient Characteristics: This proposed order serves as a catch-all for incidental and consumables that need to be procured in order to stand-up and support other procurements. They include but are not limited to: Product Qty. Plug-in Voltage Transformer, Center Positive,1000 mA, 120V AC Input, 24V DC Output 2 3-1/8" Diameter Switch Label for 22mm E-Stop Panel-Mount Push-Button Switch 4 22mm E-Stop Panel-Mount Push-Button Switch, Plastic, Turn Reset, 1 Circuit, 1-9/16" Diameter 4 Long-Life Medium-Current Relay, SPST-NO, 3-32VDC Input, 7A or 25A @ 120VAC 4 Oil-Resistant Panel Light with Screw Terminals, Conical, for 13 mm Cutout Diameter, 12V AC/12V DC, Green 4 Turn-Lock Connector, Grounded 3-Slot Female Receptacle, NEMA L5-15 4 Turn-Lock Connector, Grounded Three-Blade 90 Degree Elbow Plug, NEMA L5-15 4 Turn-Lock Connector, Grounded Three-Blade Mount Straight Plug, NEMA L5-15 4 Electronics Corrosion-Resistant Washdown Enclosure, 7-1/2" x 7-1/2" x 5" 4 5-3/4" x 5-3/4" Panel for Enclosure 4 T-Slotted Framing, Drop-in Fastener with Stud, for 1" High Single Rail 10 Plug-in Voltage Transformer, Center Positive, 1000 mA, 120V AC Input, 12V DC Output 4 Power Cord for Tight Spaces, 8 Feet Long, 0.38" OD 4 Cord Grip, Aluminum, for 0.38"-0.5" Cord OD, 1/2 Knockout Size 4 Adjustable-Temperature Soldering Station, 80W 1 Snap-Open Ratcheting Box Wrench, 7-Piece Inch Set 1 Deep Offset Two-Head Box Wrench, 9-Piece Inch Set 1 Offset Ratcheting Combination Wrench, 7-PiecePremium Inch Set 1 Universal-Fit Ratcheting Combination Wrench, 11-Piece Inch Set 1 Snap-Open Ratcheting Box Wrench, 1-1/8" Size, 13-5/8" Overall Length 2 Adjustable Torque-Limiting Wrench, Ratcheting, NIST Data, 3/8" Drive, 50-250 in.-lbs. 1 Adjustable Torque-Limiting Wrench, Ratcheting, NIST Data, 1/2" Drive, 150-750 in.-lbs. 1 Multisize Tube Bender 1 Bench-Mount Lever Press, Removable 7.25" Wide Rotating Base Plate, 6000 lb. Capacity 1 Sanding Sheet Assortment, 60 Pieces 2 Nylon Mesh Cushioned Sanding Pad, Final Finish, Micro Fine, packs of 5 6 Small-Parts Cabinet with 4 Compartmented Boxes, 15" x 20" x 15-1/2" Overall 2 Hard Plastic Hammer, 8 oz. 1 Copper Hammer with Hickory Handle, 2 lbs. 1 Soft Plastic Dead Blow Hammer, 2 lbs. 1 Precise-Control Screwdriver, 4 Piece Phillips Set 1 Precise-Control Screwdriver, 7 Piece Slotted and Phillips Set 1 Precise-Control Screwdriver, 7 Piece Slotted and Phillips Set 1 Electronic Plunger-Style Variance Indicator, Mitutoyo Model Number 543-392B, Easy-Read, with NIST Certificate 1 Smooth-Edge High-Force Sheet Metal Cutter 1 High-Force Sheet Metal Cutter with Offset Handle, Cuts Straight, Left & Right Curves 1 Wire Cutters with Tapered Head & Cushion Grip, 4-1/4" Overall Length 1 Anti-Glare Wire Cutters with Tapered Head, 4-3/4" Overall Length, Flush Cut Profile 1 Wire Gripping and Cutting Pliers with Flat & Curved Jaws & Cushion Grip, 8-3/4" Overall Length 1 Wire Gripping and Cutting Pliers with Flat Jaws, Cushion Grip, 9.5" Overall, 1-3/8" Jaw Capacity, Crimping Die 1 Wire Gripping and Cutting Pliers with Flat Jaws, Cushion Grip, 9-1/2" Overall Length, 1-1/2" Jaw Capacity 1 10 Piece Nutdriver Set 1 Ball-End Precise-Control Screwdriver, 8 Piece Hex Set 3 10 Piece Stubby Ball-End L-Key Set 2 13 Piece Stubby Ball-End L-Key Set 2 Quick-Read Tape Measure, 25 Feet Long Lacquer-Coated Steel Blade 1 Stanley Fatmax Tape Measure, Model 33-726, 26 Feet/8 M Long 1 Electronic Precision Measuring Tool Set, Mitutoyo 64Pka076B, 0" to 6" Range 1 Cone Tip with 30 Degree Tip Angle for Outside Micrometer 2 Outside Micrometer Stand 1 Button/Coin Cell Battery, Silver Oxide, Size SR44, 160 mA-Hrs. Capacity 6 Mitutoyo Electronic Caliper Number 573-721 for Small Holes and Grooves, Inch & Metric Ranges 1 Level for Tight Spaces, 9" Long 1 Magnetic Level, 36" Long 1 Digital Multi-Plane Precision Level 1 Pry Bar Set, 4 Pieces 1 Nonconductive Folding Step Stool with 3 Steps, 24" High x 17-1/4" Wide x 19-1/2" Deep 1 Long-Life Masonry Bit Set for Hammer Drills 1 Combination Inch, Wire Gauge & Letter Size Drill Bit Set, Cobalt Steel, 115 Pieces 1 Loop Clamp, Galvanized Steel, 1/2" ID, 1-7/16" Long, packs of 50 2 packs Steel Female-Threaded Anchor for Concrete, 1/4"-20 Thread Size, packs of 25 4 packs Button Head Hex Drive Screws, Zinc-Plated Alloy Steel, 1/4"-20 Thread, 3/4" Long, packs of 50 2 packs Nylon Plastic Loop Clamp, 1/2" ID, 1-3/16" Long, Black, packs of 100 2 packs Loop Clamp, Galvanized Steel, 1/4" ID, 1-1/16" Long, packs of 50 2 packs Installation Tool for 1/4"-20 Thread Size Female-Threaded Anchors 2 Steel Female-Threaded Anchor for Concrete, 3/8"-16 Thread Size, packs of 10 2 packs Installation Tool for 3/8"-16 Thread Size Female-Threaded Anchors 1 Long-Life Masonry Drill Bit for Hammer Drills, 3/8" Size, 6" Overall Length 6 Long-Life Masonry Drill Bit for Hammer Drills, 1/2" Size, 6" Overall Length 5 Masonry Drill Bit for Hammer Drills, Hex Shank, 3/8" Size, 6" Overall Length 6 Masonry Drill Bit for Hammer Drills, Hex Shank, 9/16" Size, 6" Overall Length 6 Dual Scale Pressure Gauge with Steel Case, 1/4 NPT Male Bottom Connection, 2-1/2" Dial, 0 to 3000 PSI 6 Dual Scale Pressure Gauge with Steel Case, 1/4 NPT Male Bottom Connection, 2-1/2" Dial, 0 to 4000 PSI 6 Air Directional Control Valve, 3-Way Spring Solenoid, 3 Port, 1/4 NPT, 110/120V AC 6 Thin Long-Life Spade-Terminal Relay, SPST-NO 6 Relay Socket with Spring-Clamp Terminals 6 Steel DIN 3 Rail, 7.5mm Deep, 1m Long 1 High-Temperature Shielded Cable for Ovens, 16 Gauge, 3 Wires 100 ft. Flexible High-Pressure Nylon Tubing, Semi-Clear, 0.15" ID, 1/4" OD, 100 Feet Long 200 ft. Premium Actuated On/Off Valve for Water and Inert Gas, 120V AC, 1/2 NPT Female 1 Yor-Lok Fitting for Stainless Steel Tubing, Straight Adapter for 1/2" Tube OD x 1/2 NPT Male 2 Yor-Lok Fitting for Stainless Steel Tubing, Straight Adapter for 1/4" Tube OD x 1/4 NPT Male 6 Accident Prevention Labels, (Danger-High Voltage), packs of 5 2 packs Accident Prevention Illustrated Caution Label, 2-1/2" High x 1-3/4" Wide, (High Voltage), packs of 10 2 packs Accident Prevention Illustrated Danger Label, 2-1/2" High x 1-3/4" Wide, (Warning-Electrical Hazard), packs of 10 2 packs Socket Head Screw Assortment with 400 Pieces, Zinc-Plated Alloy Steel 1 Socket Head Screw Assortment, Inch Sizes, 1300 Pieces, 18-8 Stainless Steel 1 18-8 Stainless Steel Set Screw Assortment, Inch Sizes, 2100 Pieces 1 18-8 Stainless Steel Cone-Point Set Screws, 2-56 Thread, 3/16" Long, packs of 25 1 pack 18-8 Stainless Steel Cone-Point Set Screws, 2-56 Thread, 1/4" Long, packs of 25 1 pack 18-8 Stainless Steel Cone-Point Set Screws, 4-40 Thread, 1/8" Long, packs of 50 1 pack 18-8 Stainless Steel Cone-Point Set Screws, 4-40 Thread, 3/16" Long, packs of 50 1 pack Washer Assortment for Inches with 1680 Pieces, 18-8 Stainless Steel 1 18-8 Stainless Steel Split Lock Washer Assortment for Inches with 1350 Pieces 1 18-8 Stainless Steel Threaded Rod, 1/4"-20 Thread Size, 2 Feet Long, packs of 1 1 pack 18-8 Stainless Steel Threaded Rod, 3/8"-24 Thread Size, 2 Feet Long, packs of 1 1 pack 18-8 Stainless Steel Threaded Rod, 10-32 Thread Size, 2 Feet Long, packs of 1 1 pack 18-8 Stainless Steel Threaded Rod, 5/16"-24 Thread Size, 2 Feet Long, packs of 1 1 pack 18-8 Stainless Steel Threaded Rod, 3/8"-16 Thread Size, 2 Feet Long, packs of 1 1 pack 18-8 Stainless Steel Threaded Rod, 7/16"-20 Thread Size, 2 Feet Long, packs of 1 1 pack 18-8 Stainless Steel Threaded Rod, 1/2"-13 Thread Size, 2 Feet Long, packs of 1 1 pack 18-8 Stainless Steel Threaded Rod, 1/2"-20 Thread Size, 2 Feet Long, packs of 1 1 pack 18-8 Stainless Steel Hex Nut Assortment, Inch Sizes, 700 Pieces 1 Hex Nut Assortment, Inch Sizes, 90 Pieces, 18-8 Stainless Steel 1 Steel Stud Anchor for Concrete, 1/4" Diameter, 2-1/4" Long, packs of 100 2 packs Steel Stud Anchor for Concrete, 1/2" Diameter, 4-1/2" Long, packs of 50 1 pack Masonry Drill Bit for Hammer Drills, Hex Shank, 1/4" Size, 6" Overall Length 10 Cable Tie Mount, Adhesive Back, Two Way, 0.19" Maximum Tie Width, White, packs of 50 2 packs Cable Tie Assortment, 400 Pieces in 3 Overall Lengths, UV-Resistant Black 1 Nylon ID Tag Cable Tie, 8" Overall Length, 1/2" Wide x 1" High Label Surface, packs of 50 2 packs Nylon ID Tag Cable Tie, 4-1/2" Overall Length, 3/4" Wide x 1/4" High Label Surface, packs of 50 2 packs Insulation Duct Tape for Paper Jacketing, UL Listed, 3" Wide x 50 Yard Long 2 3M Scotch Electrical Tape, Scotch 35 Handy Pack, 5-Roll, packs of 5 1 pack 3M Scotch Electrical Tape, High-Voltage, Scotch 23, 3/4" Wide x 30 Feet Long 1 Pipe Thread Sealant Tape, High-Density, 3M 48, 1/2" Wide x 7 Yard Long 2 Pipe Thread Sealant Tape, High-Density, White, 1/2" Wide x 14 Yard Long 2 Packaging Tape, Heavy Duty, General Purpose, 2" Wide x 60 Yard Long 1 Packaging Tape, Heavy Duty, General Purpose, 3" Wide x 60 Yard Long 1 Compact Metal Tube and Conduit Cutter for 1/8" to 5/8" OD 2 Ratcheting Metal Tube and Conduit Cutter for Tight Spots and 1/8" to 3/8" OD 1 Ratcheting Metal Tube and Conduit Cutter for Tight Spots and 5/16" to 1-1/8" OD 1 General Purpose Copper Tubing, 1/8 Tube Size, 1/4" OD, 0.065" Wall Thickness, 50 Feet Long Coil 2 General Purpose Copper Tubing, 1/4 Tube Size, 3/8" OD, 0.065" Wall Thickness, 50 Feet Long Coil 4 High-Pressure Nylon Tubing, Semi-Clear, 0.15" ID, 1/4" OD, 100 Feet Long 200 feet High-Pressure Nylon Tubing, Semi-Clear, 0.29" ID, 1/2" OD, 100 Feet Long 200 feet Stainless Steel Ball Bearing, Flanged, Shielded, Trade Number R168-2Z 28 Stainless Steel Ball Bearing, Shielded, Trade Number R144-2Z 4 18-8 Stainless Steel Tight-Tolerance ID Round Shims, 0.016" Thick, 1/8" ID, packs of 25 1 pack 18-8 Stainless Steel Tight-Tolerance ID Round Shims, 0.016" Thick, 1/4" ID, packs of 25 2 packs Oversized 932 Bearing Bronze Bar, 1" Thick, 8" Wide, 1 Foot Long 1 304 Stainless Steel Round Tube, 1/4" Thick, 2-1/2" OD, 1/2 Feet Long 1 304 Stainless Steel Round Tube, 3/8" Thick, 2-1/2" OD, 1/2 Feet Long 1 Extra Heavy Duty Table, Low-Profile, 30" Wide x 28" Deep 2 Heavy Duty Drawer Cabinet, Bench Height, with 5 Drawers, 34" x 30" x 29" Overall Size, Gray 2 Heavy Duty Cabinet Workbench Base, Panel Leg, Gray 2 Maple Workbench Top, 72" Wide x 36" Deep x 1-3/4" Thick with Straight Front Edge 4 Standard Duty Workbench Leg, Stationary, for 36" Deep Top x 32" High 8 Support Brace for 72" Wide Top Standard Duty Workbench Leg 4 Lower Shelf, for 72" Top Width Adjustable-Height and Standard Workbench 4 Large-Capacity Cabinet Workbench with Clear-Coated Ash Top, 72" Wide x 30" Deep Overall 2 Maple Workbench Top, 72" Wide x 30" Deep x 2-1/4" Thick with Straight Front Edge 2 Solar-Powered Mitutoyo Electronic Caliper, Number 500-474 with NIST Certificate, Inch and Metric Ranges 1 Magnetic Dry Erase Planning Board with Grid, 48" Wide x 36" High 1 Rolling Step Stool with Vinyl-Coated Steps, 14" High x 16" Diameter Overall, Gray 1 Nonconductive Folding Step Stool with 3 Steps, 24" High x 17-1/4" Wide x 19-1/2" Deep 1 Mounting Fasteners for Workbench Tops, packs of 100 1 pack Adjustable-Height Workstation with Static Dissipative Top 1 Light Fixture for Adjustable-Height Workstation 1 Bin-Box Rail for Adjustable-Height Workstation 1 Outlet Strip for Adjustable-Height Workstation 1 Timer with 30 Seconds Alarm Duration 1 Timer, Continuous Alarm Duration, 1/100 Seconds Resolution 1 Motion-Sensing Door Chimes 1 Sit/Stand Stool, 22" to 32" High, Plastic Base 2 Adjustable-Height Static-Control Stool with Backrest, Mobile with Black Fabric Seat 15 Lighted Wraparound Safety Glasses 4 Eyeglass-Fit Visitors' Safety Glasses 10 Dispenser for Safety Glasses 1 Cabinet for Safety Glasses, 6-3/4" Depth 1 Magnifying Safety Glasses with Bottom Magnifiers, 1.5x Magnification, Scratch Resistant & Fog Free Lenses 2 Comfort-Fit Ventilated Safety Goggles 2 Liquid-Resistant Cold-Protection Gloves, Neoprene Rubber, Size L 1 Extreme Cold-Protection Gloves, 14" Long, Size M 1 Extreme Cold-Protection Gloves, 14" Long, Size L 1 Electrical-Protection Gloves, Class 3 ASTM Voltage Rating, 16" Long, Size L 1 Electrical-Protection Gloves, Class 2 ASTM Voltage Rating, 16" Long, Size L 1 Sure-Grip Heat-Protection Gloves, Size L 1 Extreme Heat-Protect PBI/Kevlar Aramid Blend, Gloves, 14" Long, 1500 Degree F Maximum Temperature 1 Vibration-Damping Work Gloves, Size L 2 Sure-Grip Coated Work Gloves, 8-1/2" Long, Size M 4 Sure-Grip Coated Work Gloves, 8-1/2" Long, Size L 4 Heavy Duty Leather-Palm Work Gloves, Size S 2 Heavy Duty Leather-Palm Work Gloves, Size M 4 Heavy Duty Leather-Palm Work Gloves, Size L 4 Heavy Duty Leather-Palm Work Gloves, Size XL 4 Cowhide Leather Work Gloves, Off-White, Size L 4 Behind-Head Earmuffs 4 Three-Position Earmuffs, 27 dB Noise Reduction Rating (Over Head Fit) 4 Three-Position Earmuffs, 27 dB Noise Reduction Rating (Over Head Fit) 1 Nylon Dust Mop, 30" Wide x 5" Deep Frame, 35-1/2" Wide Mop Head, 54" Long Handle 2 Washable Mop Head, for 30" Wide x 5" Deep Frame Nylon Dust Mop 6 Plug-in Wet/Dry Vacuum Cleaner, 16 Gallon Capacity 1 Number 906-73 Fine-Dust Collection Bags for Shop-Vac Vacuum Cleaners, packs of 2 6 Manufacturer Number 905-85 Foam Sleeve for Shop-Vac Vacuum Cleaners, packs of 1 3 Super-Soft Wear-Resistant Antifatigue Mat, Textured, 22" Wide x 72" Long, Light Gray 8 Super-Soft Wear-Resistant Antifatigue Mat, Textured, 36" Wide x 60" Long, Light Gray 4 Solid Anodized Aluminum Lockout Padlock, Red American Lock A1105 2 Chip Brush with Natural Fiber Bristles, 4" Wide, 9-1/2" Long 2 Dust Brush, Horsehair Bristles, 1-3/4" Wide x 9" Long Brush 2 Flexible Grounding Wire, Stranded, 4 Gauge, 50' Long 2 Noninsulated Flexible Grounding Braid, 6 Wire Gauge Equivalent, 50' Length 100 feet Cable, SJOOW, Black Outer Insulation, 16 Gauge, 3 Wires, 50' Long 100 feet Casting Compound, See-Through, Urethane, 80A Hardness, 1 lbs. 1 Mold-Release Lubricant with Silicone for Plastic, NO-Residue, 12 oz. Can 1 Super-Smooth Mfa Clear Tubing for Chemicals, 1/4" ID, 3/8" OD Fill 50 FT Lengths 100 feet Hard Tubing for Fuels, Nylon, 0.19" ID, 1/4" OD, 100 Feet Long 400 feet Brass Compression Tube Fitting for Air & Water, Adapter, for 1/4" Tube OD x 1/4 NPTF Male 10 Brass Compression Tube Fitting for Air & Water, Adapter, for 1/4" Tube OD x 3/8 NPTF Male 10 Brass Compression Tube Fitting for Air & Water, Adapter, for 1/4" Tube OD x 1/8 NPTF Male 10 Brass Compression Tube Fitting for Air & Water, Adapter, for 1/4" Tube OD x 1/4 NPTF Female 10 Brass Compression Tube Fitting for Air & Water, Adapter, for 1/4" Tube OD x 1/8 NPTF Female 10 Brass Compression Tube Fitting for Air & Water, Adapter, for 1/4" Tube OD x 3/8 NPTF Female 10 Brass Compression Tube Fitting for Air & Water, Reducer, for 1/4"-to-3/16" Tube OD 10 Brass Compression Tube Fitting for Air & Water, Connector, for 1/4" Tube OD 10 Brass Compression Tube Fitting for Air & Water, Elbow Adapter, for 1/4" Tube OD x 1/4 NPTF Male 10 Brass Compression Tube Fitting for Air & Water, Tee Connector, for 1/4" Tube OD 10 Tube Support for 1/4" OD Brass Compression Tube Fitting for Air & Water, packs of 10 6 Flexible High-Pressure Nylon Tubing, Semi-Clear, 0.17" ID, 1/4" OD 100 feet Flexible High-Pressure Nylon Tubing, Semi-Clear, 0.138" ID, 3/16" OD, 100 Feet Long 100 feet Flexible High-Pressure Nylon Tubing, Semi-Clear, 0.093" ID, 1/8" OD, 100 Feet Long 100 feet 20 Gauge High-Voltage Continuous-Flex Wire 50 feet 14 Gauge High-Voltage Continuous-Flex Wire 50 feet High-Voltage Continuous-Flex Wire, 16 Gauge, 50' Long 50 feet Precision Flow-Adjustment Valve with Yor-Lok Fittings, 316 Stainless Steel Needle, for 1/4" Tube OD 5 Precision Flow-Adjustment Valve with Yor-Lok Fittings, 316 Stainless Steel Needle, for 1/8" Tube OD 6 Ultra-Low Vacuum Gauge with 1/4 NPT Male Bottom Connection, 2-1/2" Dial, Painted Steel Case,-60 to 0 in. of H2O 2 High-Accuracy Corrosion-Resistant Pressure Gauge, 1/4 NPT Male Bottom Connection, 2-1/2" Dial, 0-3000 PSI 4 Flexible High-Pressure Nylon Tubing, Semi-Clear, 3/8" ID, 1/2" OD, 100 Feet Long 400 feet Copper Wire Cloth, 100 x 100 Mesh Size, 0.006" Opening Size, 3 Feet x 3 Feet 2 Highly Conductive Copper Electrical Tape with Conductive Adhesive, 1" Wide x 6 Yard Long 5 Super-Conductive 101 Copper, 0.065" Thick Tube Wall, 3/8" OD, 6 Feet Long 2 Chemical & Scratch-Resistant Phenolic Workbench Top, 72" Wide 2 C. Responses: All interested parties should notify this office in writing, mail, fax, or e-mail within the posted date. Responses shall include: (I) To what extent each of the specifications can be met. (II) Include your type of business (i.e. commercial, academia), whether your organization is classified as a large or small business based on the 100 Employees standard that accompanies NAICS code 423840. If a small business, you must also list any small disadvantaged status you hold [HUBZone, 8(a), Service Disabled Veteran Owned Small Business (SDVOSB), Women Owned Small Business (WOSB), Economically Disadvantaged Women-Owned Small Business (EDWOSB), etc.]. (III) Past experience/ performance through the description of completed projects. (12) Responses to this sources sought are due no later than 11:59AM Eastern Standard Time (EST) on 11 April 2018. Submissions should be emailed to Franklin Hamilton at franklin.h.hamilton2.civ@mail.mil. Mailed submissions Can be sent to the address in block 6, ATTN: Franklin Hamilton. Questions concerning this sources sought may be directed to Franklin Hamilton at franklin.h.hamilton2.civ@mail.mil. Please be advised that.zip And.exe files cannot be accepted. (13) Place of Contract Performance: Contractor Facility (14) Estimated Delivery Timeframe or Period of Performance: Thirty (30) days after date of contract (ADC).
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/notices/92939594c21d03d2d9e5349deaa9e0cb)
 

Place of Performance

Address: Room 216, Building 1622, White Sands Missile Range (WSMR), NM 88002, White Sands Missile Range, New Mexico, 88002, United States

Zip Code: 88002
 

Record

SN04877756-W 20180406/180404231023-92939594c21d03d2d9e5349deaa9e0cb (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |