SOURCES SOUGHT
16 -- Electro-Mechanical Linear Actuator
- Notice Date
- 4/20/2018
- Notice Type
- Sources Sought
- NAICS
- 336413
— Other Aircraft Parts and Auxiliary Equipment Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, PK/PZ Tinker AFB, 3001 Staff Drive, Ste 1AG76A, Tinker AFB, Oklahoma, 73145-3015, United States
- ZIP Code
- 73145-3015
- Solicitation Number
- LA20180420
- Archive Date
- 5/31/2018
- Point of Contact
- Troy A Archie, Phone: 4057398833, Darrin S Moore, Phone: 4057348240
- E-Mail Address
-
troy.archie@tinker.af.mil, darrin.moore.2@us.af.mil
(troy.archie@tinker.af.mil, darrin.moore.2@us.af.mil)
- Small Business Set-Aside
- N/A
- Description
- THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION WILL NOT RECEIVE A RESPONSE. This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the United States Air Force to identify potential new manufacture sources and to determine if this effort can be competitive or a Small Business Set-Aside. This is not a Request for Proposal (or solicitation) or an indication that a contractual commitment will exist for this requirement. The government does not intend to award a contract on the basis of this market research. No funds are available to fund the information solicited. The Missile Sustainment Division located at Tinker Air Force Base is requesting information, pursuant to FAR PART 10, in support of Market Research to identify potential sources for the new manufacture of the NSN(s) listed below to sustain the Air Launched Cruise Missile (ALCM). The Government will use this information to determine the best future acquisition strategy for this procurement, inclusive of the potential need to do an Industry Day and/or Presolicitation Conference. The proposed North American Industry Classification Systems (NAICS) Code is either 336413 or 336419, which have a corresponding Size Standard of 1000 employees. The Government is interested in all businesses to include, Large Business, Small Business, Section 8(a) Businesses, Service-Disabled Veteran-Owned Small Businesses, HUBZone Businesses, Economically Disadvantaged Women-Owned Small Businesses, and Women-Owned Small Businesses. The government anticipates an engineering technical data package (TDP) to be available describing various aspects of deliverables ordered by contract for contractors who are eligible to receive defense export controlled information as verified by the Joint Certification Program (JCP). The contractor shall be capable of furnishing all required labor, material, test equipment, facilities, and other equipment to accomplish sample lot testing, kitting, packaging, and provide the government remanufactured units in accordance with the aforementioned TDP. The Electro-Mechanical Linear Actuators drive the elevons to the commanded positions for aerodynamic control and stability. Two identical Linear Actuators are driven by a common electronic control unit (Servo Actuator Controller). Each Actuator consists of an electric motor, reduction gearing, ball screw, linear position transducer, and sensors required for functioning of the position servo. Cabling between the actuators and controller is a part of each Actuator. The Linear Actuator is used on an Air Launched Cruise Missile (ALCM). The effort to be accomplished shall include remanufacturing of the Linear Actuator to include replacement of the potentiometer, replacement of the bearing assembly, and re-soldering of the W1P1 connector. Note: this effort will require a new NSN that the government will provide after contract award. NSN Part Number Old: 1420-01-127-4785GF 2022210-10-1 New: 1420-01-576-5267GF 2022210-10-2 The Government anticipates the initial kits to deliver no later than December 2020 and final kit deliveries no later than October 2026. The Government anticipates that there will be qualification requirements for this project. This SSS is issued solely for informational and planning purposes. No funds are available to fund the information requested. The information in this notice is current as of the publication date but is subject to change and is not binding to the Government. Oral submissions of information are not acceptable. Please e-mail your responses to the items below advising if the requirements stated above can be met to the following address: troy.archie@us.af.mil. In addition, please enter your company as an Interested Vendor on this sources sought page. Please submit the following information: •1. Company Name and Address •2. CAGE Code •3. DUNs Number •4. Company business size by NAICS code 336419 or 336413 (1000 employees) •5. Small Business Type(s), if applicable •6. Point of Contact for questions and/or clarification •7. Telephone Number and email address •8. Web Page URL •9. Teaming partners or anticipated teaming agreements (if applicable). Please delineate between the work that will be accomplished by the prime, and the work accomplished by the teaming partners. •10. Any appropriate test equipment that is currently owned or if your company is willing to procure for this project. •11. Willingness and ability to become a qualified source for this item. •12. OEM License/Agreement/Manual •13. Provide any recommendations and/or concerns Responses and/or questions to this synopsis will be posted through FBO.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCCC/LA20180420/listing.html)
- Place of Performance
- Address: Tinker AFB, Oklahoma, 73145, United States
- Zip Code: 73145
- Zip Code: 73145
- Record
- SN04896301-W 20180422/180420230623-f1d238f31430760db5ecce8cb798ea8a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |