MODIFICATION
59 -- Electron Gun Vacuum Chamber - Amendment 1
- Notice Date
- 5/24/2018
- Notice Type
- Modification/Amendment
- NAICS
- 335999
— All Other Miscellaneous Electrical Equipment and Component Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Global Strike Command, 377 MSG/Contracting Division, 377 MSG/Contracting Division, 8500 Gibson SE, BLDG 20202, Kirtland AFB, New Mexico, 87117-5606, United States
- ZIP Code
- 87117-5606
- Solicitation Number
- FA9401-18-Q-0009
- Archive Date
- 6/26/2018
- Point of Contact
- Brett A. McDowell, Phone: 5058461142, Elizabeth H. Sanchez, Phone: 505-853-7505
- E-Mail Address
-
brett.mcdowell@us.af.mil, elizabeth.sanchez@us.af.mil
(brett.mcdowell@us.af.mil, elizabeth.sanchez@us.af.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The Electron Gun Vacuum Chamber Requirement 2 PDF is the update specifications for the SF1449. COMBINED SYNOPSIS/SOLICITATION NOTICE: This is a combined synopsis/solicitation notice for commercial product/services prepared in accordance with the format in the Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation is attached. Solicitation RFQ FA9401-18-Q-0009 incorporates provisions and clauses effective through Federal Acquisition Circular (FAC) 2005-97, dated 06 Nov 2017. This requirement is set-aside 100% for Small Business. North American Industry Classification System Code (NAICS) is 335999 - manufacturing industrial and commercial electric apparatus and other equipment, with a size standard of 500 employees. All qualified small businesses under this industry are encouraged to submit quotes. DESCRIPTION OF REQUIREMENT: The cylindrical vacuum chamber is an assembly that is 30 inches in diameter and 36 inches in length with a mounted table inside the chamber. REFERENCES: The following publications are available electronically at http://farsite.hill.af.mil/ Federal Acquisition Regulation (FAR) Defense Federal Acquisition Regulation Supplement (DFARS) Air Force Federal Acquisition Regulation Supplement (AFFARS) SPECIAL INSTRUCTIONS: Offerors shall be required to return the attached Standard Form 1449 Solicitation FA9401-18-Q-0009, signed and filled in appropriately as their offer along with any additional information required to be submitted by FAR 52.212-1 Instructions to Offerors Addenda and any additional fill-in provisions. **NOTE** responses to the above solicitation shall be submitted electronically if the capability is there to do so. If not, please contact the personnel below under the Contracting Office Contact Information for additional instructions. FAR 52.212-2 Evaluation Commercial Items, Technical Acceptability, technical evaluation team will evaluate by assigning a rating of "acceptable" or "unacceptable". The Government will evaluate a minimum of three (3) lowest priced offers/proposal for technical acceptability in accordance with the solicitation. If none of the lowest three (3) are technically acceptable, the Government will evaluate the next three (3) lowest priced offers/proposal until one offer/proposal is technically acceptable, or until all offers/proposal have been evaluated. Only those offers/proposal considered technically acceptable will receive further consideration for award. Once an offer/proposal is deemed acceptable, all technical offers/proposal are considered equal. Electron Gun Vacuum Chamber Requirements: Vacuum chamber needed for dedicated electron gun chamber to connect to Mumbo for high energy (up to 200 keV) electron beam. Requirement is for one (1) cylindrical vacuum chamber with ¼" steel (low magnetic steel such as 304 or 316) wall thickness. Electropolish finish inside. 30" inner diameter, 36" length cylinder with one door Two 8" conflat ports on top, one in the middle and one close to the door end (4" - 12" from end, prefer 6"-8"). One 4.5" conflat port on the bottom in the center. Two 6" conflat ports and one 2.75" conflat on one side (side A) with the 2.75" port between the two 6" ports. One 8" conflat port 30 degrees above the 2.75" port on Side A. Two 2.75" conflat ports and one 6" conflat on the other side with the 6" port between the others. One 10" conflat on the dome end, 3" above centerline with axis parallel to centerline. One 6" conflat on door, in line with 10" conflat on dome. All ports should extend a minimum of 2" from chamber wall (between wall and back of flange) with the 10" conflat extending a minimum of 4". All ports should have fixed, though-hole mounting. Inside the chamber we'd like a mounted table, 2" above bottom, on rails so it could slide partially out of the chamber (minimum 16" sliding distance) to work on the equipment. Table size (min) 12" x 28", with 1/4-20 tapped holes for mounting equipment (similar to optical breadboards), holes spaced on 2" grid OFFER DUE DATE AND TIME: 10:00 AM 11 June 2018 LATE OFFERS: Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in this solicitation by the time specified in the solicitation. Quotations/offers or modification of quotes/offers received at the address specified for the receipt of offers after the exact time specified for receipt of offers WILL NOT be considered (ref. FAR 52.212-1(f)). CONTRACTING OFFICE CONTACT INFORMATION: All offers and questions pertaining to this solicitation shall be sent by mail or email to the address below. Brett A. McDowell 377 MSG/PKB 505-846-1142 8500 Gibson Blvd, Bldg 20202 Kirtland AFB, New Mexico 87117 Elizabeth H. Sanchez 377 MSG/PKB 505-853-7505 8500 Gibson Blvd, Bldg 20202 Kirtland AFB, NM 87117 Added: <input type="hidden" name="dnf_class_values[procurement_notice][description][1][added_on]" value="2018-05-10 16:34:53">May 10, 2018 4:34 pm Modified: <input type="hidden" name="dnf_class_values[procurement_notice][description][1][modified_on]" value="2018-05-24 11:17:36">May 24, 2018 11:17 am Track Changes ***ADC has been changed from 30 Days to 90 Days*** ***This MODIFICATION/AMENDMENT is due to a correction in the Electron Gun Vacuum Chamber specifications that was identified by the customer.*** ***Please review the specifications in the above description section for this requirement***
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/357fd6431399b9beef256f8179e5ad1c)
- Place of Performance
- Address: For Delivery: 4600 Randolph Ave. SE B 1010 W-LMCA, Kirtland AFB, New Mexico, United States
- Record
- SN04933558-W 20180526/180524230502-357fd6431399b9beef256f8179e5ad1c (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |