Loren Data's SAM Daily™

FBO DAILY - FEDBIZOPPS ISSUE OF SEPTEMBER 01, 2018 FBO #6126
DOCUMENT

71 -- Furniture - Attachment

Notice Date

8/30/2018
 

Notice Type

Attachment
 

NAICS

337214 — Office Furniture (except Wood) Manufacturing
 

Contracting Office

Department of Veterans Affairs;Ann Arbor Healthcare System;Network Contracting Office 10;2215 Fuller Road;Ann Arbor MI 48105
 

ZIP Code

48105
 

Solicitation Number

36C25018Q9741
 

Response Due

9/6/2018
 

Archive Date

9/21/2018
 

Point of Contact

Royce Jones
 

Small Business Set-Aside

N/A
 

Description

The Department of Veterans Affairs, Network Contracting Office 10, VA Northern Indiana health Care System, 1700 E 38th Street, Marion, IN 46953 intends to solicit offers for the procurement, delivery set up and installation of furniture and furnishings. Prosthetics & Sensory Aid Services in conjunction with the Interior Design team are requesting furnishings to support the activation of a brand-new Prosthetics & Sensory Aid Orthotics Central Fabrication Unit. The project is approximately a 9,260-sq. foot space in Building 79 at the VANIHCS, Marion Campus consisting of multiple administrative office spaces, various fabrication and storage spaces, a receiving area, staff break room and locker rooms. Contractors that can provide a system, installation and training that meets the requirements below are requested to send their 1. Company Name, 2. DUNS number, 3. business size under NAICS 337214, and 4. If the item(s) are available on a FSS contract or not and the FSS contract number if it is available on contract, 5. Notification if they are a VETBIZ registered VOSB/SDVOSB or not. This Sources Sought will close on 9/6/2016 at 5PM EST. Please e-mail all responses to Royce.jones@va.gov. The Statement of Work is Attached for clarification and details for this procurement. Furniture Procurement Package BUILDING 79 PROSTHETICS & SENSORY AID ORTHOTICS CENTRAL FABRICATION UNIT PROJECT Prepared by: Erik Davidson VA Northern Indiana Health Care System 1700 E 38th Street Marion, IN 46953 Project Number: 610-18-3-557-0019 TABLE OF CONTENTS STATEMENT OF WORK TECHNICAL SPECIFICATIONS Section 1 - Office Furniture Section 2 - Chairs Section 4 - Ancillary Furniture Section 5 - Miscellaneous Furniture FURNITURE ILLUSTRATION SHEETS DRAWINGS I-101 - Furniture Floor Plan VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project Number 610-18-3-557-0019 POC: Erik Davidson, Interior Design 7 May 2018 STATEMENT OF WORK 1.0 PURPOSE. This statement of work describes the requirements for the procurement, delivery, set up and installation of furniture and furnishings, for the VA Northern Indiana Health Care System (VANIHCS), Marion Campus, Building 79 Prosthetics & Sensory Aid Orthotics Central Fabrication Unit Project #610-17-510. 2.0 BACKGROUND. Prosthetics & Sensory Aid Services in conjunction with the Interior Design team are requesting furnishings to support the activation of a brand-new Prosthetics & Sensory Aid Orthotics Central Fabrication Unit. The project is approximately a 9,260-sq. foot space in Building 79 at the VANIHCS, Marion Campus consisting of multiple administrative office spaces, various fabrication and storage spaces, a receiving area, staff break room and locker rooms. 3.0 SCOPE OF WORK. This project shall consist primarily of delivery, assembly and installation of all furniture and furnishings outlined in this document. The Awarded Vendor shall include the removal of all related shipping debris and construction cleanup associated with the installation of the furniture and furnishings for the VANIHCS Building 79 Prosthetics & Sensory Aid Orthotics Central Fabrication Unit Project #610-17-510. 3.1 The Contractor shall provide the following products and related services. 3.1.1 Manufacturing and delivery of products. 3.1.1.1 The Contractor shall be responsible for any damage to the furniture that occurs due to Vendor/freight error or neglect. The Contractor will be responsible for the coordination for delivery, receiving and installation to the VANIHCS. 3.1.1.2 The Contractor shall submit an estimated schedule of delivery and installation. 3.1.2 Standard installation. 3.1.2.1 All work is to be completed during normal business hours. 3.1.2.2 Installation includes the removal and disposal of all trash/packaging associate with the install. 3.2 Preliminary furniture requirements are defined in the documents listed below. 3.3 This is a brand-name or equal procurement. All products shall be brand name or equal to the products listed in this document. Products shall comply with the salient characteristics listed in the Furniture Illustration Sheets and the requirements as defined in Section 4. If a product listed in the Furniture Illustration Sheets has been discontinued or is no longer available, the Contractor shall provide a currently available product that is equal in terms of essential salient characteristics to the product in the Furniture Illustration Sheets. 3.4 In accordance with FAR 52.211-6, the Government has elected to use brand names and specific products in an effort to assist the Contractor in the bidding of this project. The brand names and products specified are being used to establish a minimum quality level for various items and products. The Government does not intend or imply that by providing vendors or manufacturers names in the specification that subject products or items are the only items that will be acceptable to the Government. All products and items, whether named or not named, must clearly meet the salient characteristics of the specifications identified. 4.0 PRODUCT. This project consists of the procurement, delivery, setup and installation of: A1030 Locker, 2 Person, Over/Under Qty: (10) A5025 Bench, Locker Room Qty: (2) A5150 Hook, Garment, Triple, Surface Mounted Qty: (3) E0090 Workstation, L-Shaped, Free Standing, 60x72 w/ Hutch Qty: (3) E0090A Workstation, L-Shaped, Free Standing, 60x66 Qty: (6) E0123 Workstation, Straight, Free Standing, 72 W Qty: (1) Dual Monitor Arm Qty: (10) Monitor Arm Mount- Qty: (10) Keyboard Tray Qty: (10) Mouse Pad Palm Support Qty: (10) Positive Lockout Kit Qty: (10) CPU Holder Qty: (10) F0205 Chair, Side, With Arms Qty: (4) F0225 Chair, Dining Room Qty: (8) F0230 Stool, Drafting, Rotary Qty: (8) F0280 Chair, Swivel, Low Back Qty: (10) F0420 Cabinet, Filing, Half Height Qty: (8) F0795 Table, Dining, 42 Dia. Qty: (2) F3010 Bulletin Board, (Enclosed) Qty: (1) F3200 Clock, Battery Operated Qty: (12) 4.1 General Requirements. All furniture must meet the following salient characteristics as specified below and in Technical Specifications section of this document. 4.1.1 Colors and Fabrics. All exterior wood surfaces shall have a manufacturer s standard finish that is the same as, or a close match to, the finish specified on the Furniture Illustration Sheets. Fabric colors and patterns defined in the on the Furniture Illustration Sheets are preliminary recommendations and are not mandatory. However, the fabrics cited on the Furniture Illustration Sheets should be provided unless they are unavailable, either because the fabric is no longer being manufactured, or because the lead time for manufacturing the fabric would delay product delivery in accordance with the schedule. In that case, alternate fabrics shall be of the same or higher grade than the fabrics cited on the Furniture Illustration Sheets. Alternate fabrics shall be the same or similar color, material, pattern, scale, and texture as the fabrics specified on the Furniture Illustration Sheets. All fabric and finish color selections shall be selected and approved by the VANIHCS Interior Designer. 4.1.2 All products shall be designed with durability to meet the demands of the healthcare environment, including abrasion resistance and anti-microbial finish to support the reduction of fungal growth, spores from germs, microbes and bacteria, and provide tight cushion or clean out space to assist with the cleaning of products, and prevention of buildup of debris and germs. 4.1.3 All finishes shall be engineered for heavy use and frequent cleaning using hospital-grade cleaning substances. 4.1.4 Seating Fabrics: All seating fabrics shall comply with the following minimum standards. If the fabrics listed on the Furniture Illustration Sheet is no longer. 4.1.4.1 100% PVC free 4.1.4.2 Bleach Cleanable 4.1.4.3 Anti-Microbial 4.1.4.4 ASTM D4167 Wyzenbeck Method, minimum 100,000 double rubs 4.1.4.5 ASTM D3511 Class 4, Brush Pill Test 4.1.4.6 Colorfastness to Light, AATCC 16 option 1 or 3, Grade 4 minimum at 40 hours 4.1.4.7 California Technical Bulletin 117 4.1.5 All products within each room or space shall have compatible finishes and colors to provide an aesthetically pleasing solution. 4.1.6 Dimensions. All dimensions defined in the SOW, the Furniture Illustration Sheets, and on the drawings, are nominal dimensions. The actual dimensions of each product or component may vary slightly from the nominal dimensions listed, as long as the products provide the same functionality as products of the exact dimensions, and as long as the products fit within each room or space. 4.1.7 Warranty. All products shall be designed for healthcare application and covered with manufacturer s standard commercial warranty for healthcare use 3 shift, 24-7/365 days, the product is free from defects in materials and workmanship (including shipping, parts, and labor for the repair or replacement of defective item). Specific warranty requirements shall be listed below. 4.1.7.1 Office Desk & Storage Units: Laminates and wood veneers minimum 12-year warranty; Paint colorfastness minimum 5-year warranty; Pneumatic door assist mechanism minimum 5-year warranty; Power supply on light minimum 5-year warranty; Light fixture minimum 12-year warranty 4.1.7.2Monitor Arms: minimum 10 years 4.1.7.3 Office Seating: Textile & Cushions 5 years of single shift use; All other components 15 years 24/7 use 4.1.7.4 Seating, metal frame: Seating foam minimum 5-year warranty; Fabric and Finish minimum 3-year warranty 4.1.7.5 Bulletin Boards: minimum 3-year warranty 4.1.8 Sustainability. All products shall be indoor air quality and low emitting VOC requirements in accordance with the Greenguard Indoor Air Quality Certification program, or an equivalent or better environmental standard. The Contractor shall provide documentation showing that their products are Greenguard certified or are certified in accordance with the equivalent or better standard. 4.2 Salient Characteristics. All bids shall address and meet all salient characteristics defined in Technical Specification section and on the Furniture Illustration Sheets. *** FAR 52.211-6 Brand Name or Equal*** FOR ALL PRODUCTS: Must meet salient characteristics outlined above when quoting an or equal item FAR 52.211-6 Brand Name or Equal. Or equal items quoted should be similar to the requested dimensions, color scheme, function, and quality. Or equal products must include manufacturer s product brochure including specification information and all proposed finish selections. Actual finish samples if quoting an or equal item must be submitted for review by VANIHCS Interior Designer for technical and aesthetic review. FAILURE TO CLEARLY NOTE THAT THE PRODUCTS BEING QUOTED ARE THE REQUESTED BRAND NAME, OR FAILURE TO SUPPLY OR EQUAL PRODUCTS SPECIFICATIONS AND INFORMATIONAL LITERATURE SHALL CONSTITUTE A NON-RESPONSIVE BID AND WILL NOT BE FURTHER EVALUATED FOR AWARD. 5.0 DELIVERY/INSTALLATION. Delivery, set-up, and installation shall be coordinated with the VANIHCS Interior Design, Erik Davidson, Erik.Davidson@va.gov, 765-674-3321 ext. 73713. 5.1 Project installation 5.1.1 The Contractor shall submit an installation schedule for approval. 5.1.2 The Contractor shall coordinate with facility on staging needs and parking prior to installation dates. 5.1.3 Protect adjacent existing and newly placed construction, equipment and finishes as much as possible during installation to limit damage. The Contractor shall be responsible for any damage to the building that occurs due to contractor error or neglect. 5.1.4 The Contractor is responsible for the clean-up of each work area and for proper disposal of all packing/crating materials and will have limited access to cardboard recycling, metal recycling and garbage dumpsters. 5.1.5 The Contractor shall furnish all supplies, equipment, facilities and services required to perform the service under this contract. 5.1.6 Any painting and patching, if required, will be performed by the VANIHCS Painters. 5.2 Delivery. 5.2.1 Deliver materials to job in manufacturer's original sealed containers with brand name marked thereon. Protect materials from damage. 5.2.2 Package to prevent damage or deterioration during shipment, handling, storage and installation. Maintain protective covering in place and in good repair until removal is necessary. 5.2.3 Deliver only when the site is ready for installation work to proceed. 5.2.4 Preferred delivery of product to be coordinated with VANIHCS Interior Designer. 5.3 Period of Performance. Contract shall be completed by 1 October 2018. 5.4 Place of Performance. VA Northern Indiana Health Care System 1700 E 38th Street/B-79 Marion, IN 46953 5.5 Operational Hours. All work is to be completed during normal business hours. Facility will be available for deliveries and installation between the hours of 0800 and 1600 M-F, excluding Federal Holidays. 5.6 GOVERNMENT-FURNISHED EQUIPMENT, BADGE, KEYS AND/OR FACILITIES PROVIDED. N/A 5.7 CONTRACTOR FURNISHED ITEMS AND RESPONSIBILITIES. The Contractor shall furnish all supplies, equipment, facilities and services required to perform the service under this contract. The Contractor shall perform all work in accordance with this Performance Work Statement to include the additional new/ refurbished furniture. 5.8 SECURITY REQUIREMENTS. 5.8.1 Installation passes. The contractor will coordinate for the issuance of required installation passes to contractor personnel. Contract personnel shall wear a badge that clearly identifies them as a contract employee. The badge will contain a picture, name of employee, and Contractor's name. Badges shall be worn on the outer garment in full view at all times, attached to the outer shirt or jacket pocket by a button or clip or worn around the neck secured by an appropriate identification card lanyard. 5.8.2 The Contractor shall not disclose and must safeguard procurement sensitive information, computer systems and data, Privacy Act data, and Government personnel work products that are obtained or generated in the performance of this contract. This includes dissemination of protocols and papers not generally available through the public literature. 5.8.3 Company will return all issued VA photo identification badges and passes when the contract is completed. 5.9 NON-PERSONAL SERVICE STATEMENT. Contractor employees performing services under this order will be controlled, directed and supervised at all times by management personnel of the contractor. Contractor employees will perform independent of and without the supervision of any Government official. Actions of contractor employees may not be interpreted or implemented in any manner that results in any contractor employee creating or modifying Federal policy, obligating the appropriated funds of the U.S. Government, overseeing the work of Federal employees, providing direct personal services to any Federal employee or otherwise violating the prohibitions set forth in Parts 7.5 and 37.1 of the Federal Acquisition Regulation (FAR). The Government will control access to the facility and perform the inspection and acceptance of the completed work. 5.10 Contract Officer Representative (COR). The COR monitors all technical aspects of the contract and assists in contract administration. The COR is authorized to perform the following functions: assure that the Contractor performs the technical requirements of the contract: perform inspections necessary in connection with contract performance: maintain written and oral communications with the Contractor concerning technical aspects of the contract: issue written interpretations of technical requirements, including Government drawings, designs, specifications: monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies; coordinate availability of government furnished property, and provide site entry of Contractor personnel. The COR is not authorized to change any of the terms and conditions of the resulting order. 6.0 SUBMISSION OF QUESTIONS. All questions submitted for this solicitation must be electronically sent to the Contracting Officer via email. 7.0 SUBMISSION OF QUOTATION. Quote Submission: The contractors shall submit complete emailed electronic copy portable document format (.pdf) or Microsoft Excel (.xls) format of: Volume 1: (technical) a. Drawings, (floorplans, isometrics, shop drawings, typicals etc.) of proposed furniture items with dimensions per bill of materials with product subtotal b. Complete manufacturer s product specifications c. Quantity of man hours for labor/installation d. Product literature e. Finish samples f. Sustainability certification documents g. Complete testing results / certificates h. Warranty i. Self-certifying statement confirming ability to meet project deadlines. The medical center expects a delivery by 1 October 2018. Volume 2: (pricing) a. Price quote with separate line for labor/installation 8.0 EVALUATION CRITERIA. Order will be evaluated on: a. The separate, typed document from the VA Solicitation that matches the Solicitation document exactly per each line item. Products or services that include multiple parts shall be listed within each line item. No additional line items will be added. b. PDFs of detailed and dimensioned: Plan, 2-D and 3-D drawings of each product with multiple parts list to represent exactly what is being included in task order and to determine accuracy. c. Cut sheets with product detail for each line item. d. Labor/Services appropriate to the scope of work. (no pricing included) e. Project staffing plan appropriate to scope of work f. Sustainability Certification g. Price h. Business size Preference will be given to SDVOSBs and VOSBs. Per PPM 2016-05 Implementation of the Veterans First Contracting Program as a Result of the U.S. Supreme Court Decision: 38 U.S.C. § 8127 is mandatory, not discretionary and its text requires the Department to apply the Rule of Two to all contracting determinations. Section 1 Office Furniture Technical Specifications Manufacturers: Subject to compliance with requirements, acceptable manufacturers offering products that may be incorporated into the work include, but are not limited to, the following: Steelcase Herman Miller Workrite Ergonomics The following items are specified as Steelcase Answer and Universal Storage Series products. E0090 E0090A E0123 F0420 The Contractor shall provide brand name or equal modular desking components that are available on the Contractor s furniture schedule. These products shall comply with the salient characteristics listed on the Furniture Illustration Sheets and the following requirements. 1. Freestanding Desk Steelcase, Answer Freestanding Series 1.1. Items shall be tested in accordance and comply with ANSI/BIFMA X5.5 Desk/Table Products safety and performance standards and guidelines. 1.2. Work surface materials shall comply with: 1.2.1. ANSI 208.1-2009 Particleboard Classification 1.2.2. ANSI A208.2-2009 Medium Density Fiberboard 1.2.3. ANSI/NEMA LD3-2005 High Pressure Decorative Laminates (HPDL) 1.3. Laminate work surfaces (Desk & Return) shall be a minimum of 1 1/8-inch-thick top constructed of a Grade M2 or M3 particleboard or a 45-lb. medium density fiberboard core with a high-pressure laminate (HPL) on the face, a backer material on the underside, and 3mm square edge detail 1.4. Provide wire management under work surfaces and cord scallops in back of work surfaces to unclutter work surface and efficient routing of cords. 1.5. Structural supports must be welded assemblies of steel components. End support assembly must a minimum 22-gauge steel on the out skin, 20-gauge steel on the inner skin, 20- gauge steel on the stressed skin and 16-gauge on the rear channel welded to provide additional support. Leveling glides on end panels should provide at least a 1-1/2 adjustment range. 1.6. Provide half-height modesty panels on all freestanding desks constructed of a minimum 22-gauge steel. 2. Storage Steelcase, Universal Storage Series 2.1. Items shall be tested in accordance and comply with ANSI/BIFMA X5.9 Storage Unit safety and performance standards and guidelines. 2.2. Fixed pedestals should be 22-gauge steel unibody construction with 3 H base integral to cabinet and depth of pedestal shall match the depth of work surface it supports. Pedestals shall feature 1-1/2 tall adjustable leveling glides and mounting features to enable them to be attached to support work surfaces. Drawer fronts should feature flush front with full-width integral pull. Transparent plastic label holders that fit inside integral pull should be provided. Drawer suspensions shall be full extension steel ball bearings, for full depth access to drawer contents. Provide one divider and one pencil tray in each 6 H box drawer. Provide one hanging folder bar for accommodating side-to-side filing of letter-, A4-, and legal-size hanging folders in each 12 H file drawer. 2.3. Lateral files should be 22-gauge steel unibody construction with 3 H base integral to cabinet. Lateral files shall feature 1- 1/2 tall adjustable leveling glides and have mounting features to enable them to be attached to support work surfaces. Drawer fronts should feature flush front with full-width integral pull. Transparent plastic label holders that fit inside integral pull should be provided. Drawer suspensions shall be full extension steel ball bearings, for full depth access to drawer contents. 2.4. Overhead Storage should be constructed of 18 to 20-gauge steel components with an over the case door construction with a ball bearing slide mechanism to provide smooth door operation. Bins which are 60 W or more should feature two independent doors with a center vertical support between. Provide minimum of (2) two dividers with bin. Assist mechanism for bins should consist of pneumatic cylinder which slowly closes the door, preventing accidental slamming, and a spring which assists the user in opening the door to a fully open, recessed position. The force required to open and close bin doors should not exceed 5 lbs. and should be operable with one hand in accordance with ADA standards. Hutch kit should be provided for mounting bin above desktops. Vertical clearance between the work surface and the hutch-mounted bin should be a minimum 21 H. Back of hutch should be fully finished so it can be used with the back of the cabinet facing an aisle. Hutch should be securely attached to work surface with no exposed screws, clamps or brackets. Hutch should include an accessory rail to allow mounting of dividers, power/data receptacle modules and organizational work tools, doublesided fabric tackboard, LED task light, and cable manager to conceal task light cord. Energy efficient LED light should come in various widths and include magnetic mount, continuous dimming, automatic turn off after 10 hours, and occupancy sensor. 2.5. All storage pulls should be meet 2010 ADA (Americans with Disabilities Act) Standards for Accessible Design as they are easy to grasp with one hand and do not require tight grasping, tight pinching or twisting of the wrist to operate. 2.6. All storage units should feature a safety interlock system that allows only one drawer or roll-out shelf to be open at a time. 2.7. Manufacturer recommended counterweights should be provided with all storage units as required. 2.8. Keying Requirements: 2.8.1. All freestanding storage units should be lockable and be keyed alike per office except when there is more than one occupant in an office. 2.8.2. All locks within a workstation should be keyed alike. All workstations should be keyed differently. 2.8.3. Provide (2) two keys per lock and (2) sets of master keys and core removal keys to manufacturer s series. 2.8.4. Keys and locks should be numbered for easy identification 3. Dual Monitor Arms Conform Dual Articulating Series 3.1. Items shall be tested in accordance and comply with ANSI/BIFMA X5.5 Desk Products safety and performance standards and guidelines. 3.2. Model: CONF-2SDA-WOB-S 3.3. Dual Articulating Arms aligns two monitors side-by-side on a single base while maintaining independent movement and articulation and can be decoupled to use independently if needed. 3.4. Arms that can be mountable on a variety of bases and can be reconfigured as hardware and office personnel needs change. 3.5. Equipped with smooth lifting gas spring, precision bushings, and provides years of maintenance-free maneuverability. 3.6. Supports two monitor 5-17 lb. each and max. monitor height 19.5 3.7. Forward reach: 15.375 3.8. Stowed depth: 5.5 3.9. Monitor tilt: +90 °/-45 ° -Pivot: +/-90 ° - Rotation +/-90 ° 3.10. Standard VESA (75mm & 100mm) 4. Monitor Arm Mount Conform Series 4.1. Items shall be tested in accordance and comply with ANSI/BIFMA X5.5 Desk Products safety and performance standards and guidelines. 4.2. Model: CONF-BS-CCG-S 4.3. C-Clamp & Grommet Base compatible with Workrite Conform Dual Articulating Monitor Arms. 4.4. Includes both c-clamp & grommet mounting options and supports up to 48 lbs. 4.5. Equipped with 180-degree pivot limiter on lower arm for space constrained environments. 5. Keyboard Tray Banana Board Platform Series 5.1. Items shall be tested in accordance and comply with ANSI/BIFMA X5.5 Desk Products safety and performance standards and guidelines. 5.2. Model: 2128-17 5.3. Keyboard platform with unique design that can be used with both straight and corner workspace applications 5.4. Includes a patented mousing platform that slides easily from side to side to accommodate both left and right-handed users 5.5. Features a removable memory foam insert, built in document hold and cord manager, Pinnacle 2 keyboard arm with maintenance-free 17 ball bearing track 6. Mad Pad Palm Support Mouse Platform Palm Support 6.1. Items shall be tested in accordance and comply with ANSI/BIFMA X5.5 Desk Products safety and performance standards and guidelines. 6.2. Model: 2120-25 6.3. Mouse Platform Palm Support compatible with Workrite Banana Board platform. 6.4. Constructed of LeatheRiteTM memory foam. Requires no tools and is easy to add or remove as needed 7. Positive Lockout Kit Positive Tilt Lockout Kit 7.1. Items shall be tested in accordance and comply with ANSI/BIFMA X5.5 Desk Products safety and performance standards and guidelines. 7.2. Model: 3170-P2NPT 7.3. Positive Tilt Lockout kit compatible with Workrite Pinnacle 2 keyboard arm. 7.4. Restricts arm tilt to a range of 0 to -15 degrees. 8. CPU Holder Track Mount 920 Series 8.1. Items shall be tested in accordance and comply with ANSI/BIFMA X5.5 Desk Products safety and performance standards and guidelines. 8.2. Model: 920-TL 8.3. Modular design that accommodates CPU sizes from 9.75 to 18.5 H, 1.25 to 8.75 W, 8 to 19.25 D and supports CPUs up to 75 lbs. 8.4. Lockable holder that includes adjustable bottom bracket, keyed locks and tamper resistant screws for track mount. 8.5. Height range adjusts in.75 increments. 8.6. Includes 16 track that allows 10 travel & 360-degree swivel for easy access to rear of CPU and under-desk storage Section 2 Chairs Technical Specifications Manufacturers: Subject to compliance with requirements, acceptable manufacturers offering products that may be incorporated into the work include, but are not limited to, the following: Humanscale Izzy + The Contractor shall provide brand name or equal products that are available on the Contractor s furniture schedule. These products shall comply with the salient characteristics listed on the Furniture Illustration Sheets and the following requirements. 1. Side Chairs with Arms (F0205) Humanscale Diffrient Occasional Series 1.1. Side chair sized approximately 23 W X 21 D x 37 H 1.2. Stackable multipurpose chair suitable for office and group settings, stackable up to 5 high 1.3. Chair shall come with tri-panel mesh backrest that provides automatic lumbar support for every user with steel cantilever chair frame with Chrome 3 base finish and urethane arms designed to resist damage 1.4. Seat shall come with vinyl textile that exceeds 150,000 double rubs under Wyzenbeek abrasion test and shall contain no harmful stain resistant additive (PFC) 1.5. Chair shall come with field replaceable components 2. Dining Chairs (F0225) Izzy + Hannah Series 2.1. Items shall be tested in accordance and comply with ANSI/BIFMA safety and performance standards and guidelines. 2.2. Armless stacking chairs sized approximately 24 W x 18 D x 30 H 2.3. Chairs shall be constructed of thermoplastic seat and back with cold-rolled steel tubing 2.4. Chair shall have rolled waterfall design that allows back to serve double-duty as an armrest and have built in clean-out space between seat and back to prevent buildup of debris and germs and for ease of clean and to facilitate simple housekeeping 2.5. Chair shall have a minimum 250 lb. rating 2.6. Chairs shall be stackable minimum 10 high 2.7. Chair shall be SCS Indoor Advantage Gold and BIFMA level 1 certified 3. Drafting Rotary Chair (F0230) Humanscale Freedom Series 3.1. Items shall be tested in accordance and comply with ANSI/BIFMA X5.1 Office Seating Products safety and performance standards and guidelines. 3.2. Model: F111AK101--RS--- 3.3. Configuration details: 3.3.1. Armrest/Armpad: Standard Duron Arms 3.3.2. Frame Color: Polished aluminum with Graphite Trim 3.3.3. Textile: Lotus 3.3.4. Textile Color: Black 3.3.5. Box Stitching: No Stitching (Non-leathers only) 3.3.6. Seat Type: Standard Foam Seat Pan 3.3.7. Cylinder Height: High 8 cylinder with 21 foot ring 3.3.8. Casters: Soft Casters 3.3.9. Fire Proofing: None-Standard Plastics & Foams 3.3.10. Base Upgrade: Standard Matching Base 3.3.11. Shipping: Individually Boxed 3.3.12. Freedom task chair with counter-balance mechanism the provides recline resistance for all users-automatically, synchronous armrests that move up and down together and stay with user during recline, and independently adjustable seat and backrest that fits various body sizes 3.3.13. Sustainability: 28% post-consumer, 18% pre-consumer 4. Low Back Swivel Chair (F0280) Humanscale Freedom Series 4.1. Items shall be tested in accordance and comply with ANSI/BIFMA X5.1 Office Seating Products safety and performance standards and guidelines. 4.2. Model: F111AK101---S--- 4.3. Configuration details: 4.3.1. Armrest/Armpad: Standard Duron Arms 4.3.2. Frame Color: Polished aluminum with Graphite Trim 4.3.3. Textile: Lotus 4.3.4. Textile Color: Black 4.3.5. Box Stitching: No Stitching (Non-leathers only) 4.3.6. Seat Type: Standard Foam Seat Pan 4.3.7. Cylinder Height: Standard cylinder 5 4.3.8. Casters: Soft Casters 4.3.9. Fire Proofing: None-Standard Plastics & Foams 4.3.10. Base Upgrade: Standard Matching Base 4.3.11. Shipping: Individually Boxed Section 3 Miscellaneous Furniture Technical Specifications Manufacturers: Subject to compliance with requirements, acceptable manufacturers offering products that may be incorporated into the work include, but are not limited to, the following: Carolina Peter Pepper Fixture Furniture Safco Izzy + Uline The Contractor shall provide brand name or equal products that are available on the Contractor s furniture schedule. These products shall comply with the salient characteristics listed on the Furniture Illustration Sheets and the following requirements. 1. Lockers (A1030) Carolina Mile Marker Series 1.1. Double tier locker sized approximately 12 W x 14 D x 71 H to accommodate a two-person locker storage 1.2. Items shall be tested in accordance and comply with ANSI/BIFMA safety and performance standards and guidelines. 1.3. Locker materials shall comply with: 1.3.1. Particleboard: Industrial Grade: 1.3.1.1. Composition: ANSI-A208.1-1999, Grade M-3 1.3.1.2. Fire Rating: ASTM E84; Class C 1.3.1.3. Density: Multi-Density averaging 45-lbs / cu ft. 1.3.1.4. Moisture Content: 6% 1.3.2. Edge Banding: 1.3.2.1. PVC 1mm thickness on all cabinet body parts 1.3.2.2. PVC 3mm thickness on all door fronts 1.3.3. Thermally Fused Laminate: 1.3.3.1. Composition: ANSI/NEMA LD3-2005 High Pressure Decorative Laminates (HPDL) 1.4. Lockers shall have a sloped top, z doors, 4 recessed toe kick, adjustable levelers, coat hooks for storage of personal belongings in the unit interiors and shall be anchored to the wall. 1.5. Doors shall be equipped with recessed pulls and keyless locking system. Keyless locking system should operate with separate and programmable user and supervisor codes. 1.6. Hinges shall be a European style with a minimum 120-degree opening angle 1.7. Furniture levelers shall be a nylon screw-in type, with at least 4 per cabinet with a load capacity of 200 lbs. per levelers. Levelers should be adjustable from 1/2" to 1 1/2" in height. 1.8. Vendor shall provide all installation hardware. 2. Locker Room Bench (A5025) Uline Deluxe Series 2.1. Freestanding locker room bench approximately 60 W x 12 D x 17 H 2.2. Bench shall come with 12 rick dark wood lacquered top that resist spills, warping and solvents with a solid aluminum pedestal that requires no mounting. 3. Garment Hooks (A5150) Safco 4201 Series 3.1. Surface mounted triple garment hook sized approximately 18 W x 2 H not to exceed 4 D 3.2. Unit shall come with over-sized circular hooks to help protect garments and have a weight capacity of 10 lbs. per hook. Wall mounting hardware should be included. 3.3. Garment hook shall have satin aluminum finish with matching back plate 4. Dining Table (F0795) Fixture Furniture Pick-a-top, Pick-abase Series 4.1. Items shall be tested in accordance and comply with ANSI/BIFMA x5.5 safety and performance standards and guidelines. 4.2. Fixed height table shall come with a 42 diameter round table top with a flat top x base 4.3. All table tops shall be high pressure laminate with a 1 ¼ balanced construction with particle board core, edged and backed with moisture-resistant coverings to form a completely sealed outside surface. Tops shall be pre-drilled for easy assembly to powder coated finish bases and shall be edged with 2mm edge band 5. Bulletin Board (F3010) Peter Pepper Series 5.1. Wall mounted enclosed bulletin board approximately 48 W x 3 D x 36 H 5.2. Board should have lockable polycarbonate sliding doors and steel back panel that accepts magnetic. Tackable fabric or cork is not acceptable. 5.3. Wall mounting cleat/bracket and hardware should be included 6. Clock (F3200) Peter Pepper 820 Series 6.1. Clock with an approximate 14 diameter 6.2. Clock shall have a round surface with easy to read numbers with sweeping second hand, and flush acrylic cover 6.3. Unit shall be wall mounted and battery operated Manufacturer: Carolina Business Furniture Product Number: MM-121471SCDZS Dimensions: 12 W x 14 D x 71 H Quantity: 10 Required Components: Qty Part Description Upholstery: FURNITURE ILLUSTRATION SHEET A1030 LOCKER, 2 PERSON, OVER/UNDER HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Carolina s Mile Marker Storage Locker with Z Doors Sloped. Two person locker, double tier, 12 Wx14 Dx71 H, with sloped top, 4 recessed toe kick, adjustable levelers. The unit interior includes coat hooks for storage of personal belongings. Doors equipped with recessed pulls, European hinges, and keyless locking system. Keyless locking system operates with separate and programmable user and supervisor codes. Lockers should be anchored to wall. Vendor shall provide installation hardware. Level 2 & SCS Indoor Advantage Gold Certified. Designer shall be notified if alternate products are selected to ensure function and compatibility with related items N/A Finishes: Exterior Chassis: Door: Edge band: - Matching PVC Left hinge location (B3K) Coat hooks (A4S) Shared User Keyless Lock (H5T) Recessed Pull (B3D) No Power (X9) VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 Room Location (Quantity): MEN'S RESTROOM, 114 (5); WOMEN'S RESTROOM, 115 (5) Manufacturer: Uline Product Number: H-5554DLX Dimensions: 60 W x 12 D x 17 H Quantity: 2 Required Components: Qty Part Description Room Location (Quantity): Upholstery: FURNITURE ILLUSTRATION SHEET A5025 BENCH, LOCKER ROOM, PORTABLE HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Uline s Deluxe Locker Room Bench. Portable locker room bench with lacquered rick dark wood top that resist spills, warping and solvent, with solid aluminum pedestals. Includes bench top, 2 pedestals and hardware. Designer shall be notified if alternate products are selected to ensure function and compatibility with related items N/A Finishes: Lacquered wood top Solid Aluminum Pedestals VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 MEN'S RESTROOM, 114 (1); WOMEN'S RESTROOM, 115 (1) Manufacturer: Safco Product Number: 4201 Dimensions: 18 W x 2-3/4 D x 2 H Quantity: Required Components: Qty Part Description Room Location (Quantity): Upholstery: FURNITURE ILLUSTRATION SHEET A5150 HOOK, GARMENT, TRIPLE, SURFACE MOUNTED HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Safco s Nail Heal Coat Hook, 3 Hook. A surface mounted, satin aluminum triple garment hooks with matching back plate, 18 Wx3 Dx2 H. Unit with over-sized circular hooks to help protect garments with weight capacity 10 lbs. per hook. Mounting hardware included. Greenguard certified. Designer shall be notified if alternate products are selected to ensure function and compatibility with related items N/A Finishes: Color: Silver Paint/Finish: Satin Aluminum VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 3 ADMINSTRATION, 101 (1); PRODUCTION MANAGER, 101A (1); LEAD ORTHOTIC TECH, 102 (1) FURNITURE ILLUSTRATION SHEET E0090 WORKSTATION, L-SHAPED, FREE STANDING, 60X72 W/ HUTCH Manufacturer: Steelcase Product Number: Answer Freestanding Desks Dimensions: Quantity: 60 W x 72 D x 65.5 H 3 Required Components: Qty Part Description Steelcase HPL Natural Cherry Steelcase Pianista Natural Steelcase Smooth Metallic Paint Mineral Metallic Upholstery: HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: THIS TYPICAL INCLUDES: *Provide scallops in work surface where specified and provide wire management under work surface and vertical wire manager for task light cords Designer shall be notified if alternate products are selected to ensure function and compatibility with related items Tackboard: Pianista, Color: Natural, Railroaded (P423) Finishes: Laminate: Natural Cherry (2412) Edge band: Natural Cherry (6034) Metal: Mineral Metallic (4743) Lock: Polished Chrome (9201) Light: Black (0835) 1 Corner Work Surface, Flat-Front, 24Dx36W 1 Work Surface Straight, Full Depth, 24Dx36W 1 Universal Bin-Over the Case, 72W 1 Hutch Kit, 72W 1 Linear Light Shelf, LED, 58W 1 Pedestal Fixed BBF, Flush Steel Front 1 Pedestal Fixed FF, Flush Steel Front 1 Lock Cylinder-FR Series 1 Corner Support 4 Flush-Mount Bracket 2 Panel-Modesty, Half Height, 57W Room Location (Quantity): ADMINISTRATION, 101 (1); PRODUCTION MANAGER, 101A (1); LEAD ORTHOTIC TECH, 102 (1) VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 Manufacturer: Steelcase Product Number: Dimensions: Quantity: Required Components: Qty Part Description Room Location (Quantity): FURNITURE ILLUSTRATION SHEET E0090A WORKSTATION, L-SHAPED, FREE STANDING, 60X66 HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: THIS TYPICAL INCLUDES: *Provide scallops in work surface where specified and provide wire management under work surface and vertical wire manager for task light cords Designer shall be notified if alternate products are selected to ensure function and compatibility with related items VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 Steelcase HPL Natural Cherry Steelcase Pianista Natural Steelcase Smooth Metallic Paint Mineral Metallic Upholstery: Tackboard: Pianista, Color: Natural, Railroaded (P423) Finishes: Laminate: Natural Cherry (2412) Edge band: Natural Cherry (6034) Metal: Mineral Metallic (4743) Lock: Polished Chrome (9201) 6 ADMINISTRATION, 101 (2); COMPUTER AIDED DESIGN, 103 (4) FURNITURE ILLUSTRATION SHEET E0123 WORKSTATION, STRAIGHT, FREE STANDING, 72 W Manufacturer: Steelcase Product Number: Answer Freestanding Desks Dimensions: Quantity: Required Components: Qty Part Description Room Location (Quantity): Steelcase HPL Natural Cherry Steelcase Pianista Natural Steelcase Smooth Metallic Paint Mineral Metallic Upholstery: HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: THIS TYPICAL INCLUDES: 1 Straight Work Surface, 72 W, 1 Half Height Modesty Panel 1 Hutch, 72 W, 1 Overhead Task Light w/ Occupancy Sensor, 58 W, 1 End Support Panel, 1 Fixed Pedestal Box/Box/ File *Provide scallops in work surface where specified and provide wire management under work surface and vertical wire manager for task light cords Designer shall be notified if alternate products are selected to ensure function and compatibility with related items 1 Work Surface Straight, Full Depth, 24D x 72W 1 Universal Bin-Over the Case, 72W 1 Hutch Kit, 72W - Steel Infill & Tackboard 1 Linear Light Shelf, LED, 58W 1 Pedestal Fixed BBF, Flush Steel Front 1 Lock Cylinder-FR Series 1 End Support, 24D 1 Panel-Modesty, Half Height, 57W VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 Tackboard: Pianista, Color: Natural, Railroaded (P423) Finishes: Laminate: Natural Cherry (2412) Edge band: Natural Cherry (6034) Metal: Mineral Metallic (4743) Lock: Polished Chrome (9201) Light: Black (0835) 72 W x 23-1/2 D x 65.5 H 1 SHOE INVENTORY, 111 (1) Manufacturer: Workrite Ergonomics Product Number: CONF-2SDA-WOB-S Dimensions: Quantity: 10 Required Components: Qty Part Description Room Location (Quantity): Upholstery: FURNITURE ILLUSTRATION SHEET DUAL MONITOR ARM HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Workrite Ergonomics Conform Dual Articulating Arms aligns two monitors side-by-side on a single base while maintaining independent movement and articulation and can be decoupled to use independently if needed. Arms that can be mountable on a variety of bases and can be reconfigured as hardware and office personnel needs change. Equipped with smooth lifting gas spring, precision bushings, and provides years of maintenance-free maneuverability. Designer shall be notified if alternate products are selected to ensure function and compatibility with related items N/A Finishes: Silver Supports two monitors 5-17 lb. each Support max. monitor height: 19.5 Forward reach: 15.375 Stowed depth: 5.5 Monitor tilt: +90 °/-45 ° - Pivot: +/-90 ° - Rotation +/-90 ° Standard VESA (75mm & 100mm) Warranty: 10 year VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 ADMINISTRATION, 101 (3); PRODUCTION MANAGER, 101A (1); LEAD ORTHOTIC TECH, 102 (1); COMPUTER AIDED DESIGN, 103 (4); SHOE INVENTORY, 111 (1) Required Components: Qty Part Description Room Location (Quantity): Upholstery: FURNITURE ILLUSTRATION SHEET MONITOR ARM MOUNT HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Workrite Ergonomics Conform C-Clamp & Grommet Base for use with Articulating Monitor Arms. Includes both c-clamp & grommet mounting options and supports up to 48 lbs. Equipped with 180 degree pivot limiter on lower arm for space constrained environments. Designer shall be notified if alternate products are selected to ensure function and compatibility with related items Manufacturer: Workrite Ergonomics Product Number: CONF-BS-CCG-S Dimensions: Quantity: N/A Finishes: Silver C-Clamp Base Grommet Base VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 ADMINISTRATION, 101 (3); PRODUCTION MANAGER, 101A (1); LEAD ORTHOTIC TECH, 102 (1); COMPUTER AIDED DESIGN, 103 (4); SHOE INVENTORY, 111 (1) 10 Required Components: Qty Part Description Room Location (Quantity): Upholstery: FURNITURE ILLUSTRATION SHEET KEYBOARD TRAY HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Workrite Ergonomics Banana Board Keyboard platform and the unique design can be used with both straight and corner workspace applications. A patented mousing platform that slides easily from side to side to accommodate both left and right handed users. Features a removable memory foam insert, built in document holder and cord manager, Pinnacle 2 keyboard arm with maintenance-free 17 ball bearing track. Designer shall be notified if alternate products are selected to ensure function and compatibility with related items Manufacturer: Workrite Ergonomics Product Number: 2128-17 Dimensions: Quantity: N/A Finishes: Black VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 ADMINISTRATION, 101 (3); PRODUCTION MANAGER, 101A (1); LEAD ORTHOTIC TECH, 102 (1); COMPUTER AIDED DESIGN, 103 (4); SHOE INVENTORY, 111 (1) 10 Required Components: Qty Part Description Room Location (Quantity): Upholstery: FURNITURE ILLUSTRATION SHEET MOUSE PAD PALM SUPPORT HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Workrite Ergonomics Mouse Platform Palm Support compatible with Banana Board. Constructed of LeatheRiteTM memory foam. Requires no tools and is easy to add or remove as needed Designer shall be notified if alternate products are selected to ensure function and compatibility with related items Manufacturer: Workrite Ergonomics Product Number: 2120-25 Dimensions: Quantity: N/A Finishes: Black VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 ADMINISTRATION, 101 (3); PRODUCTION MANAGER, 101A (1); LEAD ORTHOTIC TECH, 102 (1); COMPUTER AIDED DESIGN, 103 (4); SHOE INVENTORY, 111 (1) 10 Required Components: Qty Part Description Room Location (Quantity): Upholstery: FURNITURE ILLUSTRATION SHEET POSITIVE LOCKOUT KIT HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Workrite Ergonomics Positive Tilt Lockout Kit compatible with Pinnacle 2. Restricts arm tilt to a range of 0 to -15 degrees. Designer shall be notified if alternate products are selected to ensure function and compatibility with related items Manufacturer: Workrite Ergonomics Product Number: 3170-P2NPT Dimensions: Quantity: N/A Finishes: Black VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 ADMINISTRATION, 101 (3); PRODUCTION MANAGER, 101A (1); LEAD ORTHOTIC TECH, 102 (1); COMPUTER AIDED DESIGN, 103 (4); SHOE INVENTORY, 111 (1) 10 Required Components: Qty Part Description Room Location (Quantity): Upholstery: FURNITURE ILLUSTRATION SHEET CPU HOLDER HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Workrite Ergonomics Track Mount 920 CPU Holder. Modular design that accommodates CPU sizes from 9.75 to 18.5 H, 1.25 to 8.75 W, 8 to 19.25 D and supports CPUs up to 75 lbs. Lockable holder that includes adjustable bottom bracket, keyed locks and tamper resistant screws for track mount. Height range adjusts in.75 increments. 16 track that allows 10 travel & 360 degree swivel for easy access to rear of CPU and under-desk storage Designer shall be notified if alternate products are selected to ensure function and compatibility with related items Manufacturer: Workrite Ergonomics Product Number: 920-TL Dimensions: Quantity: N/A Finishes: Silver Locking Track Mount VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 ADMINISTRATION, 101 (3); PRODUCTION MANAGER, 101A (1); LEAD ORTHOTIC TECH, 102 (1); COMPUTER AIDED DESIGN, 103 (4); SHOE INVENTORY, 111 (1) 10 Humanscale O1TM10K101-- Manufacturer: Product Number: Dimensions: Quantity: Required Components: Qty Part Description Room Location (Quantity): FURNITURE ILLUSTRATION SHEET F0205 CHAIR, SIDE, WITH ARMS HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Designer shall be notified if alternate products are selected to ensure function and compatibility with related items VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 Upholstery: Back: Monofilament Stripe, Color: Black Seat: Lotus, Color: Black Finishes: Frame: Chrome 3 with Black Trim 4 ADMINISTRATION, 101 (2); PRODUCTION MANAGER, 101A (2) Required Components: Qty Part Description Room Location (Quantity): Upholstery: FURNITURE ILLUSTRATION SHEET F0225 CHAIR, DINING ROOM HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Designer shall be notified if alternate products are selected to ensure function and compatibility with related items Manufacturer: Izzy+ Product Number: HAN001 Dimensions: Quantity: 8 Finishes: VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 STAFF BREAKROOM, 113 (8) Required Components: Qty Part Description Room Location (Quantity): Upholstery: FURNITURE ILLUSTRATION SHEET F0230 CHAIR, DRAFTING, ROTARY HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Humanscale s Freedom Task, with fully adjustable duron arms, revolutionary counter-balance mechanism that provides recline resistance for all users-automatically, synchronous armrests that move up and down together and stay with you during recline for supported balance, independently adjustable seat and backrest that fit virtually any body size, vinyl modular seat cushion for easy replacement, standard foam seat pan, high 8 cylinder with 21 foot ring, and soft casters for hardwood floors Designer shall be notified if alternate products are selected to ensure function and compatibility with related items Manufacturer: Humanscale Product Number: F111AK101--RS--- Dimensions: Quantity: 8 Back & Seat: Lotus, Color: Black Finishes: Frame: Polished Aluminum w/ Graphite Trim Advanced Duron Arms No Stitching (Non-leathers only) Standard Foam Seat Pan High 8 cylinder with 21 foot ring Soft Casters Standard Plastics & Foams Standard Matching Base Individually Boxed VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 GLUING/LAMINATING ROOM, 104 (3); FINISHING ROOM, 106 (2); MAIL/SHIPPING, 107 (3) Required Components: Qty Part Description Room Location (Quantity): Upholstery: FURNITURE ILLUSTRATION SHEET F0280 CHAIR, SWIVEL, LOW BACK HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Humanscale s Freedom Task, with fully adjustable duron arms, revolutionary counter-balance mechanism that provides recline resistance for all users automatically, synchronous armrests that move up and down together and stay with you during recline for supported balance, independently adjustable seat and backrest that fit virtually any body size, vinyl modular seat cushion for easy replacement, standard foam seat pan, standard 5 cylinder, and soft casters for hardwood floors Designer shall be notified if alternate products are selected to ensure function and compatibility with related items Manufacturer: Humanscale Product Number: F111AK101---S--- Dimensions: Quantity: Back & Seat: Lotus, Color: Black Finishes: Frame: Polished Aluminum w/ Graphite Trim Advanced Duron Arms No Stitching (Non-leathers only) Standard Foam Seat Pan Standard cylinder 5 Soft Casters Standard Plastics & Foam Standard Matching Base Individually Boxed VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 ADMINISTRATION, 101 (3); PRODUCTION MANAGER, 101A (1); LEAD ORTHOTIC TECH, 102 (1); COMPUTER AIDED DESIGN, 103 (4); SHOE INVENTORY, 111 (1) 10 Manufacturer: Steelcase Product Number: Dimensions: 42 W x 18 D x 29 H Quantity: Required Components: Qty Part Description Room Location (Quantity): Steelcase Smooth Metallic Paint Mineral Metallic Upholstery: FURNITURE ILLUSTRATION SHEET F0420 CABINET, FILING, HALF-HEIGHT HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Steelcase s Universal Storage series. Lockable filing cabinet with two 12 H drawers, flush front, integral pulls that run full width of the drawer, and drawer label holders. Drawers should be adaptable to either letter and legal size materials. Designer shall be notified if alternate products are selected to ensure function and compatibility with related items N/A Finishes: Laminate Top: Natural Cherry (2412) Edge band: Natural Cherry (2412) Paint: Mineral Metallic (4743) Two 12 H Drawers Flush Steel Front Laminate Top Lock VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 Steelcase HPL Natural Cherry 8 ADMINISTRATION, 101 (2); PRODUCTION MANAGER, 101A (1); LEAD ORTHOTIC TECH, 102 (1); COMPUTER AIDED DESIGN, 103 (2); MAIL/SHIPPING, 107 (2) Required Components: Qty Part Description Room Location (Quantity): Upholstery: FURNITURE ILLUSTRATION SHEET F0795 TABLE, DINING HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Designer shall be notified if alternate products are selected to ensure function and compatibility with related items Manufacturer: Fixture Furniture Product Number: R10630L + R76026 Dimensions: 42" Dia. Quantity: 2 N/A Finishes: VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 STAFF BREAKROOM, 113 (2) Manufacturer: Peter Pepper Product Number: WBCGL4836 Dimensions: 48 W x 2.5 D x 36 H Quantity: Required Components: Qty Part Description Room Location (Quantity): Peter Pepper Back Panel Taupe Metallic Peter Pepper Frame Style Linear Upholstery: FURNITURE ILLUSTRATION SHEET F3010 BOARD, BULLETIN HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Enclosed bulletin board unit, consisting of wood frame with steel back panel that accepts magnetic accessories, with sliding, lockable polycarbonate doors. Wall mounting cleat/ bracket and hardware included. Designer shall be notified if alternate products are selected to ensure function and compatibility with related items N/A Finishes: Frame Finish: Light Cherry Frame Style: Linear Back Panel: Steel - Taupe Metallic Doors: Polycarbonate Steel Back Panel Sliding, lockable Polycarbonate Doors VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 Peter Pepper Frame Finish Light Cherry 1 STAFF BREAKROOM, 113 (1) Manufacturer: Peter Pepper Product Number: 820 Dimensions: 13.875 W x 1.625 D x 13.875 H Quantity: Required Components: Qty Part Description Room Location (Quantity): Peter Pepper Bezel Color Black Upholstery: FURNITURE ILLUSTRATION SHEET F3200 CLOCK, BATTERY, OPERATED HEALTHCARE PRODUCT SHALL MEET THE FOLLOWING CRITERIA: Peter Pepper s Model 820 series. Clock, approximately 14 diameter. Round surface, easy to read numbers with sweeping second hand and flush acrylic cover. Wall mounted unit, battery operated. Designer shall be notified if alternate products are selected to ensure function and compatibility with related items N/A Finishes: Bezel Color: Black Clock Face Design - Face No. 37 VA Northern Indiana Health Care System 1700 E 38th Street, Marion, IN 46953 Project #: 610-18-3-557-0019 12 100 (1); ADMINISTRATION, 101 (1); PRODUCTION MANAGER, 101A (1); LEAD ORTHOTIC TECH, 102 (1); COMPUTER AIDED DESIGN, 103 (1); GLUING/ LAMINATING ROOM, 104 (1); FINAL SANDING/ MACHINE ROOM, 105 (1); FINISHING ROOM, 106 (1); MAIL/SHIPPING, 107 (1); SHOE INVENTORY, 111 (1); WET/PLASTER ROOM, 112 (1), STAFF BREAKROOM, 113 (1)
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/VA/VAAAHCS506/VAAAHCS506/36C25018Q9741/listing.html)
 

Document(s)

Attachment
 

File Name: 36C25018Q9741 36C25018Q9741.docx (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4570693&FileName=36C25018Q9741-000.docx)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4570693&FileName=36C25018Q9741-000.docx

 

File Name: 36C25018Q9741 01 Statement of Work B79 CFU 610-18-3-557-0019 8-20-18.pdf (https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4570694&FileName=36C25018Q9741-001.pdf)

Link: https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=4570694&FileName=36C25018Q9741-001.pdf

 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Record

SN05065383-W 20180901/180830231901-b94dc2d9c414a6de9f8f55acd8afc06d (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |