SPECIAL NOTICE
66 -- EAG Probe - Sole Source
- Notice Date
- 9/5/2018
- Notice Type
- Special Notice
- NAICS
- 334516
— Analytical Laboratory Instrument Manufacturing
- Contracting Office
- Agricultural Research Service - Eastern Business Service Center
- ZIP Code
- 00000
- Solicitation Number
- 1232SC18P-933216
- Archive Date
- 9/26/2018
- Point of Contact
- Lynn S. Hults, Phone: 9792609376
- E-Mail Address
-
lynn.hults@ars.usda.gov
(lynn.hults@ars.usda.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- Sole Source Document THIS IS A NOTICE OF INTENT TO AWARD A SOLE SOURCE CONTRACT AND IS NOT A REQUEST FOR COMPETITIVE QUOTES. The USDA/ARS intends to award a Firm fixed price sole source contract under the authority of 41 U.S.C 253(c)(1) and FAR 6.302-1(a)(2), only one responsible source, to: Syntech Ockenfels Syntech GmbH Gewrbestr. 3 79256 BNuchenbach, Germany Description of Requirement: The objective of this sole source award is to procure the following items: 1. 2-Channel USB Acquisition Controller, Type IDAC-2 incl. SW 1 6.390,00 1 a. 2-channel signal recording system optimised for EAG and GC-EAD signals b. Connects directly to the USB port of the PC; No external power needed. c. Auto- and manual offset control and special EAG filter functions d. Compatible with Syntech EAG and GC-EAD software for Windows e. Suitable for application in the field f. including software: i. EAG and GC/EAD SIGNAL RECORDING and ANALYSIS PROGRAM g. For use with Syntech IDAC data acquisition systems h. Auto zero on trigger signal of base line and time base i. Real-time recording and display of ElectroAntennogram signals (EAG) j. Calculation and display of EAG maxima and Normalized values k. Calculation and display of means and standard deviations 2. 2 Stimulus Controller Unit, Type CS-55 1 4.680,00 - 1 a. Independent from laboratory air supply b. Internal vibration compensated air pumps c. Built-in activated carbon inlet filter d. Filter can be easily replaced e. Delivers continuous and pulsed air flow f. Graphic LCD display g. Flow range 10 - 50 ml/s, non-calibrated h. Pulse duration 0.1 - 60 s in 0.1s increments i. Repeat function: interval range 1- 60 s. j. Signal outputs compatible with Syntech recording systems k. Suitable for EAG and GC/EAD and SSR procedures l. Including foot operated start switch 3. 3 Effluent Conditioner Assembly, Type EC-03 1 5.370,00 1 a. Heated transfer line for GC-EAD, 30 cm long b. Digital temperature controller max. 320 C c. Effluent /Air mixing assembly with Interchangeable flow tube d. Adapted to fit available Gas Chromatograph e. Heater separated from mains via isolation transformer f. Connect to GC Agilent 7890 or 6890 4. 4 Micromanipulator, Type MP-15 incl. EAG-Combi-Probe 1 8.080,00 1 a. Complete ‘desktop-recording' configuration for EAG and GC/EAD b. Two x-y-z positioners on magnetic bases c. Stainless steel base plate 20 x 30 cm to hold positioners d. Fine joystick control of right-hand positioner e. Adjustable stimulus applicator with stainless steel tube on magnetic base f. High impedance EAG-Combi-Probe and electrode holder on left-hand side g. Connects directly to Syntech IDAC computer interface h. No amplifier needed if used in combination with IDAC computer interface i. No Faraday shield required for EAG and GC/EAD recording 5. 5 EAG Probe, Type PRG-2 3 1.560,00 4.680,00 - 3 a. For use with electrically conductive gel b. Including 2 interchangeable holders for different sizes of antennae c. Suitable for filiform antennae d. High input impedance 10x input stage e. Can be connected directly to Syntech IDAC systems 6. 6 Antenna Holder for EAG Probe - 8 a. 3 Small holders b. 3 Medium Holders c. 2 Large Holders The NAICS code for this requirement is 334516; the small business size standard is 1000 employees. This notice of intent is not a request for competitive quotes; however, interested persons may identify their interest and capability to respond to this requirement. All information received by 3:00 PM Central Time on September 11, 2018, will be considered by the Government. Responses shall be submitted to Lynn Hults at lynn.hults@ars.usda.gov. The e-mail subject line shall state: 1232SC18P-933216 Notice of Intent to Sole Source. A determination by the Government not to compete this proposed contract based on responses to this notice is solely within the discretion of the Government. NO TELEPHONE REQUESTS WILL BE HONORED.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/7fcbee9d799ba4d5c1ea0326142c76f9)
- Place of Performance
- Address: USDA-ARS-CMAVE, 1700 SW 23rd Dr., Gainesville, Florida, 32608, United States
- Zip Code: 32608
- Zip Code: 32608
- Record
- SN05073706-W 20180907/180905231357-7fcbee9d799ba4d5c1ea0326142c76f9 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |