Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY - FEDBIZOPPS ISSUE OF NOVEMBER 11, 2018 FBO #6197
SOURCES SOUGHT

68 -- Suppliers of Energy Curable Inks

Notice Date
11/9/2018
 
Notice Type
Sources Sought
 
NAICS
325910 — Printing Ink Manufacturing
 
Contracting Office
Department of the Treasury, Bureau of Engraving and Printing, Office of Acquisition, 14th and C Streets, SW, Room 708 E, Washington, District of Columbia, 20228, United States
 
ZIP Code
20228
 
Solicitation Number
2031ZA19N00001
 
Point of Contact
Tonya M. Sullivan, Phone: 2028742507, Kathleen A. Barton, Phone: 2028743139
 
E-Mail Address
tonya.sullivan@bep.gov, kathleen.barton@bep.gov
(tonya.sullivan@bep.gov, kathleen.barton@bep.gov)
 
Small Business Set-Aside
N/A
 
Description
The Bureau of Engraving and Printing (BEP) has interest in, and is seeking to identify suppliers of Energy Curable Intaglio and/or Letterpress Inks. Energy curable inks include those designed to cure solely using Ultraviolet (UV) light or Electron beam (EB). In addition hybrid inks are being considered. For this notice a hybrid ink is one that contains both UV curable components and components that cure through oxidation. The ink should comply with environmental regulations in Fort Worth, Texas and Washington DC. In addition, inks compatible with cotton linen substrates are preferred. Responses to this notice should include the following: 1. Technical/Product Information to minimally include a. Viscosity b. Yield Value c. Tack d. Shelf Life e. Range of Typical Ink Film Heights (i.e. maximum, minimum, average in micrometers) 2. Range of colors available 3. Cured print of the energy cured ink 4. A Safety Data Sheet (SDS) for the product 5. Minimum order quantity 6. Vendor's technical and administrative points of contact, including names, titles, addresses, telephone and fax numbers, and e-mail addresses For UV curable, and UV curable hybrid inks 7. The applicable wavelength, or wavelength range for ink curing A current SDS should be included for review by the BEP to determine if the ink can be used at BEP facilities. If approved for BEP use, a sample of the ink may be requested. In addition, vendors may be contacted if clarification is needed.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/notices/1927d886cf07565178e4300348c564d0)
 
Place of Performance
Address: Bureau of Engraving and Printing, 14th & C Streets, SW, Washington, District of Columbia, 20228, United States
Zip Code: 20228
 
Record
SN05149049-W 20181111/181109230559-1927d886cf07565178e4300348c564d0 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.