SOURCES SOUGHT
99 -- Sources Sought for Unidirectional, High Performance Ulra-High Molecular Weight Polyethylene (UHMWPE) Film Material
- Notice Date
- 1/16/2020 10:42:15 AM
- Notice Type
- Sources Sought
- NAICS
- 325211
— Plastics Material and Resin Manufacturing
- Contracting Office
- W6QK ACC-APG ADELPHI ADELPHI MD 20783 USA
- ZIP Code
- 20783
- Solicitation Number
- W911QX-20-Q-0021
- Response Due
- 1/23/2020 8:59:00 AM
- Archive Date
- 02/07/2020
- Point of Contact
- Laurice Bocao, Shanna Dellinger
- E-Mail Address
-
laurice.l.bocao.ctr@mail.mil, shanna.dellinger.civ@mail.mil
(laurice.l.bocao.ctr@mail.mil, shanna.dellinger.civ@mail.mil)
- Description
- The Contractor shall provide a minimum of five (5) kilograms (kg) and maximum of 25kg of drawn unidirectional, high performance ultra-high molecular weight polyethylene (UHMWPE) film with the following properties: - Greater than 25 grams/denier tenacity. - Thickness of 5-75 microns, with less than 10 percent (%) variation. - Films shall be at least 150 millimeter (mm) wide and at least 175 mm wide and not vary by more than plus or minus (+/-) five (5) mm in width. - Film shall be provided on a continuous, unidirectional roll(s) with no adhesive layer and at least 25 meters (m) long.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/a4c7aa295053444ca3603f0d94d0d8d4/view)
- Place of Performance
- Address: Aberdeen Proving Ground, MD 21005, USA
- Zip Code: 21005
- Country: USA
- Zip Code: 21005
- Record
- SN05537646-F 20200118/200116230145 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |