SAMDaily.us | PRESOL | 66 | INDICATOR, FAULT LOC

SAMDAILY.US - ISSUE OF FEBRUARY 12, 2020 SAM #6649
SOLICITATION NOTICE

66 -- INDICATOR, FAULT LOC

Notice Date: 2/10/2020 6:15:45 AM
Notice Type: Presolicitation
NAICS: 334519 — Other Measuring and Controlling Device Manufacturing
Contracting Office: DLA LAND AND MARITIME COLUMBUS OH 43218 USA
ZIP Code: 43218
Solicitation Number: SPE7M120Q0138
Response Due: 2/25/2020 12:00:00 PM
Archive Date: 03/11/2020
Point of Contact: KALYN McGraw614-692-9965, Phone: 614-692-5502
E-Mail Address: kalyn.mcgraw@dla.mil
(kalyn.mcgraw@dla.mil)
Description: Indicator, Fault Loc NSN(s): 6625-01-455-3846 Item Description: INDICATOR,FAULT LOC RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT � � � THIS NATIONAL STOCK NUMBER AND/OR ASSOCIATED DATA HAS BEEN DETERMINED TO CONTAIN, UTILIZE, OR GENERATE COVERED DEFENSE INFORMATION (CDI).� CDI IS UNCLASSIFIED CONTROLLED TECHNICAL INFORMATION OR OTHER INFORMATION, AS DESCRIBED IN THE CONTROLLED UNCLASSIFIED INFORMATION (CUI) REGISTRY THAT REQUIRES SAFEGUARDING PURSUANT TO DFARS 252.204-7012. � RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: � http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx � FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.� FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. � � � � RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS) � � � RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN � � � RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES � � * * * MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO, OR COME IN DIRECT CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). * THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE (ODS) IN THE DESIGN, MANUFACTURING, TESTING, CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM UNDER ANY MILITARY OR FEDERAL SPECIFICATION, STANDARD OR DRAWING REFERENCED IN THIS ITEM DESCRIPTION IS ""PROHIBITED"" UNLESS THE SEPARATE WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS OBTAINED.� THIS PROHIBITION SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT DOES NOT ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS. THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS DEFINED IN ""FAR 11.001"" OR TO PART-NUMBERED- ONLY ITEMS. * NOTE:� THE CITED DRAWING IS A SOURCE CONTROLLED DRAWING AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE BEEN APPROVED.� EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE CITED DRAWING.� OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME. � This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export.� Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad.� This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries. � DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures.� Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data. �In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration.� If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil. � DLA processes the vendor's technical data request on a first come, first served basis.� Failure to comply timely with required information may result in lack of consideration for DLA solicitations.� It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence.� DLA will work diligently on validating vendor requests.� Vendors will be notified within 3 business days of when their requests were approved.� However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses. � � ------� HAZARDOUS MATERIAL REQUIREMENTS� ------- .�� . **IF**� AN ITEM CONTAINS HAZARDOUS MATERIAL(S), A SAFETY DATA SHEET (SDS) AND THE OSHA HAZARD COMMUNICATION LABEL THAT COMPLIES WITH NEW 29 CFR 1910.1200 REQUIREMENTS SHALL BE PROVIDED BY THE OFFEROR AT THE TIME OF THE QUOTE. THE SDS MUST BE COMPLETED IN ITS ENTIRETY IN ACCORDANCE WITH FED-STD-313 (MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES). .�� . OFFEROR SHALL DETERMINE IF THEIR PRODUCT MEETS THE DEFINITION OF ""HAZARDOUS MATERIAL"" AS DEFINED UNDER THE LATEST VERSION OF FED-STD-313. THE OFFEROR MUST LIST ANY HAZARDOUS MATERIAL AS DEFINED IN ACCORDANCE WITH FED-STD-313 AND FAR 52.223-3.� **IF** ITEM IS NOT CLASSIFIED AS A HAZARDOUS MATERIAL IN ACCORDANCE WITH FED-STD-313, THE OFFEROR SHALL DISREGARD THE REQUEST FOR DOCUMENTATION SUBMISSION. � Teledyne Technologies Incorporated 26687 P/N 843591-3 � IAW BASIC DRAWING NR 78286 70550-01108 REVISION NR R�� DTD 01/01/1939 PART PIECE NUMBER: 70550-01108-107 � IAW REFERENCE DRAWING NR 78286 70550-01108 REVISION NR R�� DTD 03/01/1995 PART PIECE NUMBER: � IAW REFERENCE DRAWING NR 78286 70550-01108 REVISION NR AL� DTD 01/01/1939 PART PIECE NUMBER: � IAW REFERENCE DRAWING NR 78286 70550-01108-107 REVISION NR�� DTD 07/28/2017 PART PIECE NUMBER: Manufacturer�s Code and Part Number (if applicable): Teledyne Technologies Incorporated (26687) P/N: 843591-3
Web Link: SAM.gov Permalink
(https://beta.sam.gov/opp/2f10b26f19dd42f38c3beb098e379e01/view)
Place of Performance: Address: Columbus, OH 43213, USA; Zip Code: 43213; Country: USA
Record: SN05555973-F 20200212/200210230147 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

66 -- INDICATOR, FAULT LOC