SOLICITATION NOTICE
72 -- Extra Long Mattress
- Notice Date
- 3/22/2020 2:09:05 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 337910
— Mattress Manufacturing
- Contracting Office
- 646TH SUPPORT DETACHMENT APO AP 96218-5682 USA
- ZIP Code
- 96218-5682
- Solicitation Number
- W90VN9-20-R-0020
- Response Due
- 3/26/2020 9:00:00 PM
- Archive Date
- 04/11/2020
- Point of Contact
- MAJ Renato ""Ray"" Dapat, Phone: 3157635683
- E-Mail Address
-
renato.dapat.mil@mail.mil
(renato.dapat.mil@mail.mil)
- Description
- Vendor is responsible to deliver and stock items at designated place (Delivery point) in SP# 47, Daegu storage or Bldg# 410, Camp Carroll, ITEM � Twin XL (MATTRESS) - at a minimum 38� X 80� X 9.5�� DOUBLE SIDED MATTRESS SPEC (159EA) LAYER 1. 312 Coil Innerspring Unit, at a minimum 13 Gauge (2.5 mm) With a 6 Gauge (4.9 mm) Border Rod LAYER 2. Insulator Pad, 2 OZ. � Each Side at a minimum LAYER 3 Foam Support � at a minimum 3/4� � 19.2 Kg/m3 Density �20 ILD Each Side LAYER 4. Foam Support � at a minimum 1� � 19.2 Kg/m3 Density �30 ILD - Each Side LAYER 5. At a minimum 1/4� Thick, 24 Kg/m3 Density - 20 ILD Quilt Foam LAYER 6. Fire Barrier Fiber- Performance G2100 � 305 g/m2 at a minimum LAYER 7. Cover Cotton Dark Navy Color Damask antimicrobial� 420 g/m2- Quilted at a minimum ? PACKAGED IN A 4 MIL BAG ? THE INSULATOR PAD AND THE FOAM WILL BE FASTENED TO THE INNERSPRING UNIT WITH 15D50D RINGS (150 PER MATTRESS MINIMUM). THE FINISHED STYLE SHALL BE TAPED EDGED WITH A MINIMUM 6� � 2 OZ. COVER FLANGE AND A 1.25� POLYESTER BINDING TAPE. THE BORDER WILL BE QUILTED TO MATCH THE TOP SIDES OF THE MATTRESS ? FOAM GUARDS: At a minimum 8 X 12 X 3- ADDED FOR CORNER SUPPORT Firm Style -Minimum 13 gauge Bonnel type coils -Minimum 6 gauge steel border rods -Minimum Over 210 Denier Cotton or Equal Ticking with Flame Retardant -Ticking shall have the following properties at a minimum: Crack and Stain resistant Antimicrobial / antifungal Antibacterial and Anti-bedbug resistant Fluid Resistant PROOF AND CERTIFICATION OF TESTING TO MEET BOTH FALMABILITY STANDARDS. (Vendor should provide to FMB as Original Flame Resistant Certification by Korea Fire Department) � Non-allergenic � Wipe to clean and odor free � Flame retardant and antistatic � Shall have blue binding tape 7/8� W minimum � Shall have a minimum of seven (7) layers of quilting and padding Mattress shall comply with U.S. Flammability Standards � 16 CFR 1632 (Cigarette ignition) � 1 July 2007 16 CFR 1633 1 (open flame) 2 EA textile material trademarks (size: 5 cm x 10 cm) is required to affix on both long side of mattress with made date by sewing WARRANTY: Warranty for vendor shall be at minimum two years in a written statement upon receipt of award, the contractor shall provide one (1) sample product with a full size for approval within 14 calendar days to verify FMB Staffs can cut and disassemble the sample product. Once the sample product is approved, the contractor shall deliver entire quantities within 45 days of acceptance of sample product
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/1abbff238304482cb160767589141a94/view)
- Place of Performance
- Address: AP 96260-0000, USA
- Zip Code: 96260-0000
- Country: USA
- Zip Code: 96260-0000
- Record
- SN05596385-F 20200324/200322230139 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |