SOLICITATION NOTICE
54 -- Explosive Storage Magazine
- Notice Date
- 4/14/2020 10:11:42 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 337215
— Showcase, Partition, Shelving, and Locker Manufacturing
- Contracting Office
- ATF WASHINGTON DC 20226 USA
- ZIP Code
- 20226
- Solicitation Number
- DJA-20-AMIA-PR-0182
- Response Due
- 4/17/2020 1:00:00 PM
- Archive Date
- 05/02/2020
- Point of Contact
- Agnes Brooks, Phone: 2026489115
- E-Mail Address
-
agnes.brooks@atf.gov
(agnes.brooks@atf.gov)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- This�Request for Quote (RFQ)�is for Explosive Magazine (s) for the Bureau, of Alcohol, Tobacco, Firearms and Explosives Puerto Rico II Field Office. SEE ATTACHED SPECIFICATION/SYSTEM REQUIREMENTS DOCUMENT SPECIAL NOTE: This�RFQ does not obligate ATF to award a contract or complete the proposed project. ATF reserves the right to cancel this RFQ if it is considered to be in its best interest of the government. The associated North American Industrial Classification System (NAICS) code for this procurement is 337215-Showcase, Partition, Shelving, and Locker Manufacturing. All interested parties shall provide quotation(s) if capable, as follows: Questions related to this RFQ must be sent via email to agnes.brooks@atf.gov by Wednesday, April, 15, 2020, 11:00 am Eastern Standard Time (EST). Questions not received by then will be considered LATE and may not be considered or addressed. The RFQ number should be clearly displayed in the Subject line of the email. Quotes must be submitted by Monday, April 20, 2020, 4:00 pm EST. Quotes not received by then will be considered LATE and may not be considered or addressed. The RFQ number should be clearly displayed in the Subject line of the email. List ATF Reference Number DJA-20-AMIA-PR-0182 on your quote The Delivery Date is 30 days from award. Quotes MUST be good for 30 calendar days after the close of the RFQ and should be submitted in Good-Faith in order to be responsive. The Offeror�s company name (no logos), the date, solicitation number, shall be included on each page of the quotation/offer (may be included in a header/footer).� ALL SPECIFICATIONS SHALL BE ADDRESSED INDIVIDUALLY IN THE VENDORS RESPONSE to be manufactured to meet or exceed construction requirements as described in Title 27 CFR Section 555.208. �Failure to address each requirement by explaining in �detail� how the contractor intends to meet or exceed all the instructions listed, shall result in a non-responsive quote, which will eliminate the vendor from further consideration immediately. New Equipment ONLY; NO remanufactured or ""gray market"" items. All items must be covered by the manufacturer's warranty. To be considered for award, all Vendors must be manufactured/Federally authorized distributors of the equipment/services they are offering with a demonstrated capability of delivering the entire order within the time frames specified by the Buyer on the award. Vendors may be required to provide documentation as proof of authorization to be considered for award. This RFQ requires registration with the System for Award Management (SAM) prior to award, pursuant to applicable regulations and guidelines. Registration information can be found at www.beta.sam.gov. ALL REGISTRATION MUST BE ""ACTIVE"" AT TIME OF AWARD. NO EXCEPTIONS WILL BE MADE. The requirement must be in accordance to Title 27 CFR Section 555.208, based on that requirement see following specifications. Item Description: Anchor bracket with bolt Quantity: (4 each) Item Description: NFPA ground kit Quantity: (2 each) Item Description: ATF compliant padlock 7/16'' shackle diameter with 1-1/16'' clearance. The lock has a 5 pin�tumbler. Quantity: (4 each) Zinc-rich 302 primer undercoat for marine environments Standard Urethane 349 overcoat included Certified as C5M grade coating per ISO 12944 �Item Description: Termite Treatment Needs to be done prior to shipment to PR Item Description: 20''(508mm) wide non-sparking aluminum shelving (price per linear foot) Quantity: (12 each) Item Description: 30'' X 30'' X 30'' (762mm x 762mm x 762mm) Type 2, Class ABC ATF spec attached magazine Quantity: (2 each) Item Description: 1/4'' (6.4mm) steel roof mounted sun shield (price per sq ft)(304mm x 304mm) Quantity: (24 each) Item Description: Direct Freight & Handling to San Juan, Puerto Rico Must be included in the overall cost of the final proposal Delivery Address Bureau of Alcohol, Tobacco, Firearms Explosive Puerto Rico II Field Office 350 Calle Chardon Suite 301 San Juan, PR� 00918 Amendment Number One (1) is hereby issued to nd the solicitation�to answer the following question: Question: I see the accessories listed for the magazines on this RFQ but not the magazine size itself. Can you provide some guidance on what qty they are looking for?� Response: (1) side attached cap box within the range of 30� x 30� x 30� Magazine within the 7�x7�x7� range
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/dd1411dfde524ebaba9795f90f5303be/view)
- Record
- SN05620833-F 20200416/200414230156 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |