SOLICITATION NOTICE
59 -- National Instruments DAQ (Data Acquisition) Electronics
- Notice Date
- 4/28/2020 12:08:57 PM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 335999
— All Other Miscellaneous Electrical Equipment and Component Manufacturing
- Contracting Office
- W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
- ZIP Code
- 13602-5220
- Solicitation Number
- 20200428
- Response Due
- 5/15/2020 12:00:00 AM
- Archive Date
- 11/11/2020
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Awardee
- null
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 20200428 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-05. The associated North American Industrial Classification System (NAICS) code for this procurement is 335999 with a small business size standard of 500.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2020-05-15 12:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be West Point, NY 10996 The MICC End User requires the following items, Brand Name Only (Exact Match), to the following: LI 001: p/n 763000-01 Power Cord, U.S., 120 VAC, 2.3 meters Powers devices by transmitting and distributing 110v electrical power., 3, EA; LI 002: p/n 780534-01 USB 2.0 Cable, 2 meter, Type A to Type B, connector jack screws The USB cable works with SuperSpeed or Hi-Speed USB hosts and devices, but is backward-compatible with USB 1.1 hosts and devices. You can use this cable for vision cameras and CompactDAQ or CompactRIO systems that support a locking USB cable. The USB cable features a B-type connector for device-side connection and an A-type connector for host-side connection. Some models offer an extension cable with retention. For these cables, the USB A receptacle end can be either surface mounted or panel mounted. The USB A plug features a jackscrew that securely screws into the USB retention mount next to each USB port on supported CompactRIO and stand-alone CompactDAQ systems and meets requirements for Class I, Div/Zone 2 hazardous locations, 6, EA; LI 003: p/n 781425-01 cDAQ-9171, CompactDAQ Chassis (1 slot USB) 1 Slot, USB CompactDAQ Chassis�The cDAQ 9171 is a bus powered, CompactDAQ USB chassis designed for small, portable sensor measurement systems. The chassis provides the plug and play simplicity of USB to sensor and electrical measurements. It also controls the timing, synchronization, and data transfer between C Series I/O modules and an external host. You can use this chassis with a combination of C Series I/O modules to create a mix of analog I/O, digital I/O, and counter/timer measurements. The cDAQ 9171 also has four 32 bit general-purpose counters/timers that you can access through an installed, hardware timed digital C Series module for applications that involve quadrature encoders, PWM, event counting, pulse train generation, and period or frequency measurement., 3, EA; LI 004: p/n 781157-01 cDAQ-9174, CompactDAQ chassis (4 slot USB) 4 Slot, USB CompactDAQ Chassis�The cDAQ 9174 is a CompactDAQ USB chassis designed for small, portable sensor measurement systems. The chassis provides the plug and play simplicity of USB to sensor and electrical measurements. It also controls the timing, synchronization, and data transfer between C Series I/O modules and an external host. You can use this chassis with a combination of C Series I/O modules to create a mix of analog I/O, digital I/O, and counter/timer measurements. The cDAQ 9174 also has four 32 bit general-purpose counters/timers. With multiple timing engines, you can run seven hardware-timed operations simultaneously, with three independent rates for analog input., 2, EA; LI 005: p/n 781156-01 cDAQ-9178, CompactDAQ chassis (8 slot USB) 8 Slot, USB CompactDAQ Chassis�The cDAQ 9178 is a CompactDAQ USB chassis designed for small, portable sensor measurement systems. The chassis provides the plug and play simplicity of USB to sensor and electrical measurements. It also controls the timing, synchronization, and data transfer between C Series I/O modules and an external host. You can use this chassis with a combination of C Series I/O modules to create a mix of analog I/O, digital I/O, and counter/timer measurements. The cDAQ 9178 also has four 32 bit general-purpose counters/timers. You can access these counters, as well as share clocks and triggers, through two built-in BNC connectors., 1, EA; LI 006: p/n 783731-01 NI-9203 Spring Term, +/- 20 mA, 16 bit, 200 kS/s, 8 ch Analog Input Module 200 kS/s, �20 mA, 8-Channel C Series Current Input Module �The NI 9203 is intended for high-performance control and monitoring applications. It features programmable input ranges and variable connectivity options. To protect against signal transients, the NI 9203 includes a channel to earth ground double isolation barrier (250 Vrms isolation) for safety and noise immunity., 2, EA; LI 007: p/n 781068-01 NI-9207 8-ch (current) + 8-ch (voltage) combo module, 24 bit 500 S/s, 16-Channel C Series Voltage and Current Input Module�The NI 9207 is a combination voltage and current input module designed with industrial systems in mind. It features eight current and eight voltage input channels, with built-in noise rejection., 2, EA; LI 008: p/n 785185-01 NI-9213 Spring Term, 16-ch Thermocouple, 24-bit, 75 S/s, AI Module 16-Channel, 75 S/s Aggregate, �78 mV C Series Temperature Input Module�The NI 9213 is a high-density thermocouple input module that is designed for higher channel count systems. With this module, you can add thermocouples to mixed-signal test systems without taking up too many slots. The NI 9213 includes anti-aliasing filters, open-thermocouple detection, and cold-junction compensation for high-accuracy thermocouple measurements. The NI 9213 features NIST traceable calibration and a channel to earth ground double isolation barrier for safety, noise immunity, and high common-mode voltage range., 2, EA; LI 009: p/n 779011-01 NI-9215 Screw Term, +/- 10 v, 16-bit, 100 kS/s/ch, 4 ch Analog Input Module �10 V, 100 kS/s/ch, 16-Bit, Simultaneous Input, 4-Channel C Series Voltage Input Module�The NI 9215 performs differential analog input. The module contains NIST-traceable calibration, a channel to earth ground double isolation barrier for safety and noise immunity, and high common-mode voltage range. It is also offered in two connectivity variants: 10 position screw terminal or BNC., 1, EA; LI 010: p/n 785994-01 NI-9219 Spring Terminal, Bridge, RTD, Thermocouple analog input Module Provides analog input channels for voltage, current, temperature, and strain measurements in CompactDAQ or CompactRIO systems. C Series Universal Analog Input Modules are designed for multi-purpose measurements, including built-in support for accelerometer, powered sensor, full-bridge, and voltage measurements as well as quarter-bridge, half-bridge, 60 V, and current measurements using measurement-specific adapters. You can also choose options to measure signals from sensors such as strain gages, resistance temperature detectors (RTDs), thermocouples, load cells, and other powered sensors., 1, EA; LI 011: p/n 779521-01 NI-9237 4-ch 50 kS/s/Ch, 24-bit Bridge AI Module 50 kS/s/channel, Bridge Analog Input, 4-Channel C Series Strain/Bridge Input Module�The NI 9237 includes all the signal conditioning required to power and measure up to four bridge-based sensors simultaneously. The module provides strain or load measurements with zero interchannel phase delay. It also has 60 VDC isolation and 1,000 Vrms transient isolation, providing high common mode noise rejection and increased safety. You can program the NI 9237 for use with half-bridge and full-bridge sensors with built-in excitation. The four RJ50 jacks provide direct connectivity to most torque or load cells and offer custom cable solutions with minimal tools., 1, EA; LI 012: p/n 779012-01 NI-9263 Screw Term, +/- 10 v, 16 bit, 100 kS/s/ch, 4 ch AO Module 100 kS/s/ch Simultaneous, �10 V, 4-Channel C Series Voltage Output Module�The NI 9263 is a simultaneously updating analog output module. It features overvoltage protection, short-circuit protection, low crosstalk, fast slew rate, high relative accuracy, and NIST traceable calibration. The NI 9263 module includes a channel to earth ground double isolation barrier for safety and noise immunity, 2, EA; LI 013: p/n 779334-01 NI-9265 Screw Term, 0 to 20 mA, 16 -bit, 100 kS/s, 4 ch Analog Output Module 4-Channel C Series Current Output Module�The NI 9265 is ideal for interfacing and controlling industrial current-driven actuators at high rates. The module has built-in open-loop detection, which generates an interrupt in software when an open loop is detected as well as zeroing outputs to ensure safety and avoid driving actuators at system power on. The NI 9265 requires an external power supply and includes a channel to earth ground double isolation barrier for safety and noise immunity., 2, EA; LI 014: p/n 785192-01 NI-9375 Spring Term, 24 V, 16-ch sinking DI, 16-ch sourcing DO module The NI-9375 (Part Numbers: 785192-01, 781030-01, and 781030-02) is a C Series Digital Module and a mix of computerized input, advanced yield that works with NI CompactDAQ or CompactRIO hardware platforms. Part number 785192-01 has a Spring Terminal front connector and 250 Vrms Ch-Earth Ground Isolation, while part numbers 781030-01 and 781030-02 have D-Sub front connectors and 60 VDC Ch-Earth Ground Isolation. Part number 781030-02 is the only configuration of the NI-9375 that is conformal coated.Every one of the 16 channels are compatible with 24 V logic levels. The greater part of the 16 devoted computerized yield lines are good with 6 V to 30 V signals, in view of the outside power supply. Although the advanced information and computerized yield lines share a similar planning motor, take note that the advanced yield line has a maximum spread postponement of 500 ?s. The NI 9375 offers 60 V of isolation between the information and yield banks and highlights 1,000 Vrms withstand separation from channel to earth ground. It works with modern rationale levels and signals for guide association with a wide exhibit of mechanical switches, transducers, and different gadgets.With the NI-9375, it is possible to take vibrations or duty cycle. The counter measures the high and low spans of a pulse on a signal. Utilizing the deliberate qualities, it gives users the chance to find the duty cycle of the signal. The NI-9375 C Series Digital Module returns the present estimation amounts when the counter is analyzed. The estimation esteems are comprised of the high and low circumstances of the beat in the quantity of ticks of the 100 MHz counter timebase., 1, EA; LI 015: p/n 779005-01 NI-9411 6-ch +/-5-24 v, 1 Mhz, Diff./SE Digital Input Module �5 V to 24 V, 6 Differential/Single-Ended Channels, 500 ns C Series Digital Module�The NI 9411 works with industrial logic levels and signals for direct connection to a wide array of industrial switches, transducers, and devices. The NI 9411 is a correlated digital module, so it can perform correlated measurements, triggering, and synchronization when installed in a CompactDAQ chassis., 1, EA; LI 016: p/n 779522-01 NI-9422 8-ch 60v, 250 us, Sinking/Sourcing DI Module 24 V to 60 V, 8 Channel (Sinking/Sourcing Input), 250 �s C Series Digital Module�The NI 9422 works with industrial logic levels and signals to directly connect to a wide array of industrial switches, transducers, and devices. Each channel accommodates 24 V to 60 V digital input signals. The NI 9422 features channel to channel and channel to earth ground isolation for the highest level of safety for automotive and industrial environments The NI 9422 is a correlated digital module, so it can perform correlated operations, triggering, and synchronization., 1, EA; LI 017: p/n 779003-01 NI-9474 8-ch 24 v, 1 us, High-Speed Sourcing Digital Output Module 30 V, 8-Channel (Sourcing Output), 1 �s C Series Digital Module�The NI 9474 works with industrial logic levels and signals to directly connect to a wide array of industrial switches, transducers, and devices. Each channel is compatible with signals from 5 V to 30 V, features transient overvoltage protection between the output channels and earth ground, and has a LED that indicates the status. The NI 9474 is a correlated digital module, so it can perform correlated operations, triggering, and synchronization when installed in a CompactDAQ chassis., 2, EA; LI 018: p/n 783906-01 NI-9482 C Series Relay Output Module, 4-ch SPST, 30/60 VDC, 250 VAC, Spring Terminals The NI-9482 (Part numbers: 783906-01 and 782999-01) is a C Series Relay Output Module manufactured by National Instruments. It is specifically developed for a wide range of industrial devices, such as suitable for actuators, DC devices, and motors. The NI 9482 Relay Module fulfils the monitoring limits for EMC. These limits are mandatory for safety against harmful intrusion. This module has four electromechanical relay channels. Each channel has two switchable pins (Cha and CHb). 2 wire ferrules are used to generate a safe connection in the NI 9482, which is used when the module is subjected to high vibration. The NI 9842 module is structured with LED circuits. These LED circuits direct the current state of each channel. The LED will light up when a channel is on. The LED becomes dark when a channel is off. The LED circuits are disabled when the chassis is in sleep mode. The NI-9482 has a screw terminal, which is easily removable. The NI-9482 is also featured with 10 terminal connectors. The NI-9482 assists a low power sleep mode. It depends on the chassis to which the module is connected. The module consumes less power and release less heat in sleep mode. The NI-9482 has 4 digital output channels with single pole single throw (SPST) technology. Each channel is capable of switching signals up to 30 VDC, 60 VDC, and 250 VDC. All channels are electrically isolated from each other. The channels with 250 Vrms of continuous isolation are earth ground., 4, EA; LI 019: p/n 779473-01 NI-9901 Desktop Mounting Kit Helps you affix equipment, such as chassis and modules, to specific frames. The Mount includes tools to help you mount chassis, modules, controllers, and more to specific equipment racks or frames. Mounting options include 35 mm DIN rail mounts, panel mounts, desktop mounts, and 19-inch rack mounts., 2, EA; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, MICC End User intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. MICC End User is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. The offeror must comply with the following commercial item terms and conditions: FAR 52.252-1, Solicitation. Provisions Incorporated by Reference; FAR 52.212-1, Instructions to Offerors; 52.212-3, Offeror Representations and Certifications; FAR 52.211-6, Brand name or Equal. The following clauses apply to this solicitation: FAR 52.212-4, Contract Terms and Conditions � Commercial Items. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, apply: 52.204-10, Reporting Executive Compensation and First Tier Subcontract Awards; 52.219-6, Notice of Total Small Business Set-Aside; 52.219-28, Post Award Small Business Program Rerepresentation; 52.222-3, Convict Labor; 52.222-19, Child Labor-Cooperation with Authorities and Remedies; 52.222-21, Prohibition of Segregated Facilities; 52.222-26, Equal Opportunity; 52.222-36, Affirmative Action for Workers with Disabilities; 52.225-13, Restrictions on Certain Foreign Purchases; 52.232-33, Payment by Electronic Funds Transfer--System for Award Management. 52.233-4, Applicable Law for Breach of Contract Claim; The following DFARS clauses apply: DFARS 252.04-7004, Alternate A System for Award Management; 252.211-7003, Item Identification and Valuation; 252.225-7002, Qualifying Country Sources as Subcontractors; 252.232-7010, Levies on Contract Payments; 252.203-7000, Requirements Relating to Compensation of Former DoD Officials; 252.225-7001, Buy American Act and Balance Of Payments Program; 252.225-7036, Buy American Act -- Free Trade Agreements -- Balance of Payments Program; 252.232-7003, Electronic Submission of Payment Requests; 252.247-7023, Primary and ALT III, Transportation of Supplies by Sea. IAW 52.204-7 System for Award Management (SAM) Registration (July 2013), the offeror must be registered in SAM and fully input their Representations and Certifications for a complete record. Information can be found at http://www.sam.gov or by calling 866-606-8220, or 334-206-7828 for international calls. 52.204-13 - System for Award Management Maintenance Shipping is FOB Destination CONUS (CONtinental U.S.). New Equipment ONLY. NO USED OR REMANUFACTURED PRODUCTS WILL BE ACCEPTED. Submitted Quotes will be valid for 45 days after the auction closing. This solicitation is issued as a Request for Quotation (RFQ), not an invitation for bid (IFB).). IAW FAR 52.252-2 Clauses Incorporated by Reference, the full text of FAR and DFARS Clauses may be accessed electronically at http://farsite.hill.af.mil; and are current to the most recent revision dates posted on this site. The associated North American Industrial Classification System (NAICS) code for this procurement can be found. The small business size standard for that NAICS code can be found at https://www.sba.gov/sites/default/files/files/Size_Standards_Table.pdf ""AMC-Level Protest Program If you have complaints about this procurement, it is preferable that you first attempt to resolve those concerns with the responsible contracting officer. However, you can also protest to Headquarters (HQ), Army Materiel Command (AMC). The HQ AMC-Level Protest Program is intended to encourage interested parties to seek resolution of their concerns within AMC as an Alternative Dispute Resolution forum, rather than filing a protest with the Government Accountability Office (GAO) or other external forum. Contract award or performance is suspended during the protest to the same extent, and within the same time periods, as if filed at the GAO. The AMC protest decision goal is to resolve protests within 20 working days from filing. To be timely, protests must be filed within the periods specified in FAR 33.103. If you want to file a protest under the HQ AMC-Level Protest Program, the protest must request resolution under that program and be sent to the address below. All other agency-level protests should be sent to the contracting officer for resolution. Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 Packages sent by FedEx or UPS should be addressed to: Headquarters U.S. Army Materiel Command Office of Command Counsel 4400 Martin Road Rm: A6SE040.001 Redstone Arsenal, AL 35898-5000 Fax: (256) 450-8840 The AMC-Level Protest procedures are found at: http://www.amc.army.mil/pa/COMMANDCOUNSEL.asp. If internet access is not available, contact the contracting officer or HQ, AMC to obtain the HQ AMC-Level Protest Procedures."" ""52.204-9, Personal Identity Verification of Contractor Personnel; 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards; 52.222-41, Service Contract Act; 52.237-2, Protection of Government Buildings, Equipment and Vegetation; 252.201-7000, COR Clause; 252.223-7006, Prohibition On Storage And Disposal Of Toxic And Hazardous Materials; 252.243-7001, Pricing of Contract Modifications; 252.246-7000, Material inspection and receiving report"" Representation by Corporations Regarding an Unpaid Tax Liability or a Felony Conviction under any Federal Law. Wide Area WorkFlow Payment Instructions 252.204-7012 Safeguarding of Unclassified Controlled Technical Information All deliveries shall be palletized when the material exceeds 250 lbs. (excluding the pallet), or exceeds 20 cubic feet, to comply with the requirements of Department of the Army Pamphlet 700-32 and MIL-STD-147E. This is currently an unfunded requirement with a high expectation that funds will be available. When and if funds become available a contract will be awarded at that time. IAW FAR 52.212-2; Evaluation - Commercial Items, the following factors shall be used to evaluate offers: technical capability of the item offered to meet the Government requirement and price. Technical capability is more important than price. No multiple awards will be made. Quotes received through Unison Marketplace will be evaluated and awarded on an ?all-or-nothing? basis. Wide Area WorkFlow Payment Instructions Please address your questions through the Unison Marketplace buy. If your questions are not being answered in a timely manner, please send your question to the S2P2 Contracting Officer - usarmy.drum.acc-micc.mbx.micc@mail.mil or call 315-772-5582. In accordance with DFAR provision 252.225-7000 Buy American Act--Balance of Payments Program Certificate, I certify that each end product, except those listed in paragraphs (c)(2) or (3) of the attached provision, is a domestic end product. ****YOU MUST FILL OUT THE ATTACHED IF OTHER THAN DOMESTIC END PRODUCT IF YOU DO NOT FILL IT OUT AND YOU DELIVER OTHER THAN A DOMESTIC END PRODUCT YOUR DELIVERY WILL NOT BE ACCEPTED********** ****READ DFARs Clause 252.225-7001 to ensure your product comes from a QUALIFYING COUNTRY******* ****IF YOU QUOTE A PRODUCT OTHER THAN DOMESTIC FROM A NON-QUALIFYING COUNTRY YOUR QUOTE WILL NOT BE ACCEPTED*****
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/0b15436a8c8a4805be23504d6eb8d2c2/view)
- Place of Performance
- Address: West Point, NY 10996, USA
- Zip Code: 10996
- Country: USA
- Zip Code: 10996
- Record
- SN05638481-F 20200430/200428230149 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |