SOURCES SOUGHT
34 -- Guided Bore Machine
- Notice Date
- 6/4/2020 5:11:36 AM
- Notice Type
- Sources Sought
- NAICS
- 333517
— Machine Tool Manufacturing
- Contracting Office
- W6QK ACC-PICA PICATINNY ARSENAL NJ 07806-5000 USA
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN-20-X-0BZ6
- Response Due
- 7/2/2020 12:00:00 PM
- Archive Date
- 07/17/2020
- Point of Contact
- Lester Croft, Jason Kenlan
- E-Mail Address
-
lester.c.croft.civ@mail.mil, jason.a.kenlan2.civ@mail.mil
(lester.c.croft.civ@mail.mil, jason.a.kenlan2.civ@mail.mil)
- Description
- The U.S. Army Contracting Command - New Jersey (ACC-NJ), on behalf of the U.S. Army Combat Capabilities Development Command Armaments Center (CCDC-AC), Picatinny Arsenal, NJ, is conducting market research to determine the capability of businesses to provide One (1) Guided Bore Machine, along with associated equipment, installation, training and maintenance, to support the prototype manufacturing of large caliber cannon tubes. This machine would be capable of counter boring a large diameter through hole in alloy steel cannon tubes that would have an as-forged inside diameter (ID) that would be non-concentric to the machined outside diameter (OD). This would be a combination of out of round condition and relative straightness of the as-forged ID to the machined OD.� If a tube, held on the OD, is rotated within the confines of a machine centerline while the bore wanders into an eccentric position, the cutting head that is producing the bore will be forced to move in an orbital pattern.� The machine capability being assessed in this notice would be able to compensate for that condition and correct during the cutting process to produce an ID that is concentric to the OD of the tube.� Tubes in this case would range from 20 to 60 feet in length and have finished bores from 6 to 12 inches in diameter.� The expected total indicated runout of the ID to the OD at any given location is between 0.100 and 0.350 inches. BACKGROUND: The applicable NAICS code for this requirement is 333517 - Machine Tool Manufacturing with a Small Business Size Standard of 500 employees. The Product Service Code is 3419 Miscellaneous Machine Tools. Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. SUBMISSION DETAILS: Each potential source is requested to provide the contract number(s), dollar value(s) and brief description of work previously or currently being performed, which specifically demonstrates the contractor's ability to successfully satisfy the requirements of the provision, installation, training and maintenance of the Guided Bore Machine.� Firms shall also provide point of contact information, where available, for the efforts cited above.� In addition, please provide the firm�s name and address, point of contact with telephone number and email address, CAGE Code and DUNS number, and size of business (i.e. large, small, disadvantaged, veteran owned, woman owned, etc.). This is a market survey for information only, and shall not be construed as a request for a proposal or as an obligation on the part of the US Government.� The US Government does not intend to award a contract on the basis of this market survey or otherwise pay for information solicited. All data should be sent at no cost to the US Government by July 2nd, 2020 at 3:00 pm EST. All submissions are requested to be made via electronic mail to both Points of Contact (POCs) for this action: Les Croft, Contract Specialist, email: lester.c.croft.civ@mail.mil; and Jason Kenlan, Contracting Officer, email: jason.a.kenlan2.civ@mail.mil. Phone inquiries will not be addressed; all requests should be submitted in writing via email. Respondents will not be notified of the results of the survey. DISCLAIMER �THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A �REQUEST FOR PROPOSAL (RFP)� TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. RESPONSES WILL NOT BE RETURNED TO THE RESPONDER. NOT RESPONDING TO THIS NOTICE DOES NOT PRECLUDE PARTICIPATION IN ANY FUTURE REQUEST FOR QUOTE (RFQ) OR INVITATION FOR BID (IFB) OR RFP, IF ANY ISSUED. IF A SOLICITATION IS RELEASED, IT WILL BE SYNOPSIZED ON THE GOVERNMENT-WIDE POINT OF ENTRY (GPE). IT IS THE RESPONSIBILITY OF POTENTIAL OFFERORS TO MONITOR THE GPE FOR ADDITIONAL INFORMATION PERTAINING TO THIS REQUIREMENT.�
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/60305008c6d44874aa6e2e0c82220898/view)
- Place of Performance
- Address: Picatinny Arsenal, NJ 07806, USA
- Zip Code: 07806
- Country: USA
- Zip Code: 07806
- Record
- SN05681194-F 20200606/200604230159 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |