SOLICITATION NOTICE
63 -- CCTV Equipment
- Notice Date
- 6/15/2020 7:25:39 AM
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 334290
— Other Communications Equipment Manufacturing
- Contracting Office
- W6QM MICC-FT DRUM FORT DRUM NY 13602-5220 USA
- ZIP Code
- 13602-5220
- Solicitation Number
- SILL434KJR0046
- Response Due
- 7/1/2020 12:00:00 AM
- Archive Date
- 12/28/2020
- Point of Contact
- Name: Marketplace Support, Title: Marketplace Support, Phone: 1.877.933.3243, Fax: 703.422.7822, Email: MarketplaceSupport@unisonglobal.com;
- E-Mail Address
-
marketplacesupport@unisonglobal.com
(marketplacesupport@unisonglobal.com)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Awardee
- null
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is SILL434KJR0046 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-06. The associated North American Industrial Classification System (NAICS) code for this procurement is 334290 with a small business size standard of 750.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2020-07-01 14:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Fort Sill, OK 73503 The MICC End User requires the following items, Brand Name or Equal, to the following: LI 001: 1. Cameras. The minimum requirements for cameras shall be as follows: a. All 106 shall be the same make and model network IR dome camera in a vandal and weatherproof housing. Cameras shall be compatible with the selected Network Video Recorders identified in item #2 below. b. Shall be 2 megapixel high resolution (1920 x 1080) with CMOS sensor, with a 2.8 � 12mm F1.4 motorized variable focus lens. Shall have a frame rate of 30 frames per second. Shall have auto gain control, auto white balance, backlight compensation, image mirror, image flip, progressive scanning, smart Codec, tamper detection, panning range of 0 to 350, tilt range of 0 to 67 and a video format of NTSC. Shall have infrared LEDs with a viewing an infrared viewing distance of 30 meters. c. Shall be Vandal and weatherproof housing that can withstand temperatures between the following: operating temperature - -22 degrees F � 131 degrees F; storage temperature - 22 degrees F � 140 degrees F; ingress protection � IP66; vandal resistance � IK10. d. Shall have local storage support with built in Micro SDHC/SDXC slot (128GB Max.). e. Power: low voltage DC 12 V/ POE Class 3. f. Color/material: ivory/metal, 106, EA; LI 002: 2. Network Video Recorder (NVR). A statement of compatibility must be provided stating that the CCTV cameras and NVR are compatible and will function as required. All programming and formatting must be accomplished prior to delivery. Hard copy manuals (in English) must be provided for the NVRs. Programming instructions and language for the NVRs must be in English. The minimum requirements for NVRs shall be as follows: a. All 4 shall be the same make, model, rack mountable, backwards and forward compatible, standalone NVR. NVR shall be compatible with the selected cameras identified in item #1 above. b. Shall have video inputs up to 128CH; resolution CIF � 12MP; live � local display 1X HDMI, 1X VGA dual monitor. c. Shall have an operating system embedded Linux; recording bandwidth maximum 300Mbps. d. Shall have an Network interface � RJ-45, Gigabit Ethernet x 2; transmission bandwidth 512 e. Shall have connections � VGA, HDMI, audio, Ethernet, Alarm, USB, storage, serial/reset and power cord. f. Environmental; operating temperature +32F to 104F, operating humidity 20% to 85% RH. g. Shall have dual monitor support to permit simultaneous viewing of up to the total amount of hybrid channels (36 in this case) and playback., 4, EA; LI 003: 3. Hard Disk Drives. The minimum requirements for hard disk drives shall be as follows: a. All 50 shall be the same make, model, and size. b. Shall have 10 TB (terabytes) with 256MB (megabyte) multi-segmented cache, 3.5� drives c. Shall have an operating temperature between 32 degrees F and 140 degrees F. d. Shall be SATA transfer rate 6Gb/s, 64MB Cache, 3.5 inch disk drive e. Shall be surveillance grade hard drives, designed for use in security systems and for 24 hour operation. f. Shall be formatted and installed in the NVR item #2 above., 50, EA; LI 004: 4. CCTV Camera wall mounts. The minimum requirements for camera wall mounts shall be as follows: a. All 56 shall be the same make and model and compatible with the Vandal proof dome cameras identified in item #1 above. b. Shall be of aluminum construction. c. Shall match the color of the vandal proof dome cameras in line #1. d. Shall have a pass through for camera pigtail., 56, EA; LI 005: 5. Security monitors. The minimum requirements for monitors shall be as follows: a. All 4 shall be the same make and model and be of surveillance grade capable of 24/7 operation. b. Shall have at least a 49 inch display, 4K UHD 3840X2160, 500 nits brightness, non-glare panel, rated for 24/7 operation, IP5X rating. c. Shall have the following interfaces: HDMI, DVI, DisplayPort 1.2: built-in Wi-Fi and Bluetooth d. Shall have VESA 200 x 200 wall mount in portrait or landscape mode e. Shall have at least a 60 hertz refresh rate. f. Shall have a remote control., 4, EA; LI 006: 6. Monitor ceiling mounts. Shall have similar characteristics of the VideoSecu brand �Adjustable Ceiling TV Mount�, item model number MLCE7-1O2, ASIN B001KPILLE. The minimum requirements for monitor ceiling mounts shall be as follows: a. All 2 shall be the same make and model and compatible with the monitors listed in line #5 above. b. Shall be of able to support at least 66lbs. c. Shall be compatible with the following VESA 100x100, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400mm. d. Shall have be able to tilt 15 degree forward and 5 degree backward, 360 swivel and 90 degree rotate adjustment. e. Shall have adjustable height ranges of 19�-34� from ceiling in 2� increments. f. Shall have an adjustable ceiling plate that may attach to a flat or sloped ceiling., 2, EA; LI 007: 7. Monitor wall mounts. Shall have similar characteristics of the Fleximounts brand �A21 47-84 inch Big TV Wall Mount Bracket Fulll Motion Swivel Tilt Flat Screens, Adjustable Ceiling TV Mount�, item model number MLCE7-1O2, ASIN B001KPILLE. The minimum requirements for monitor ceiling mounts shall be as follows: a. All 2 shall be the same make and model and compatible with the monitors listed in line #5 above. b. Shall be of able to support at least 66lbs. c. Shall be compatible with the following VESA 100x100, 200x200, 300x200, 300x300, 400x200, 400x300, 400x400mm. d. Shall have be able to tilt 15 degree forward and 5 degree backward, 360 swivel and 90 degree rotate adjustment. e. Shall have adjustable height ranges of 19�-34� from ceiling in 2� increments. f. Shall have an adjustable ceiling plate that may attach to a flat or sloped ceiling., 2, EA; LI 008: 8. Network Switch. The minimum requirements for cameras shall be as follows: a. All 5 shall be the same make and model. b. Shall have 48 port POE switch, 16x10/100 Mbps RJ45 Ports, 2 RJ 45 Ethernet Gigabit uplink ports, 2 SFP Fiber Optical Gigabit uplink ports, powers up to 16 POE cameras, POE output of 250 watts, 7.2Gbps switch capability, IEEE 802.3af compliant +UL Listed. c. Shall connect to network devices over category 5/5e/6 cable, with an effective range of up to 100m/328 feet. d. Shall require no configuration and automatically detect network device speeds, adjust to provide optimum performance. e. Shall feature built in LEDs to provide constant status feedback and provide easier trouble shooting., 5, EA; LI 009: 9. Wireless computer mouse. The minimum requirements for the wireless mouse shall be as follows: a. All 4 shall be the same make and model. b. Shall have a 2.4 GHz wireless connection receiver. c. Shall be compatible with Windows 10 or later. d. Shall a laser grade optical type sensor. e. Shall use 2 AAA batteries., 4, EA; LI 010: 10. HDMI Cable. Shall have similar characteristics of the brand �BlueRigger 4K HDMI Cable (35 feet, Black, 4K 60Hz, High Speed, Nylon Braided�, item model number HDMI-NB-CL3-10m, ASIN B005LJQM3Y. The minimum requirements for the cable shall be as follows: a. All 4 shall be the same make and model. b. Shall be at least 35 feet in length. c. Shall support latest HDMI Standard � 4K, UHD, 3D, Audio Return Channel (ARC) , Category 2 Certified, 18 Gbps /600 MHz refresh rate . d. Shall have 100% pure copper conductors, triple cable shielding, 24K gold-plated full metal connectors. e. Shall be compatible with HDMI components � connect Blue-Ray Player, laptops with HDMI output to 4K UHD TV, projectors, A/V receiver., 4, EA; LI 011: 11. Un-interruptible power supply (UPS). Shall have similar characteristics of the brand �APC UPS, 2200VA Smart-UPS Sine Wave UPS Battery Backup with Extended Run Option, 2U Rack/Tower Convertible, Line-Interactive, 120V (SMX2200RMLV2U)� item model number: SMX2200RMLV2U, ASIN B004FIP7MY. The minimum requirements for the UPS shall be as follows: a. All 3 shall be the same make and model. b. Shall be rack mountable. c. Shall have output power capacity of at least 1.98kWatss/ 2.2kVA. d. Shall have a rack height of 2U e. Shall have the following output connections: (6) NEMA 5-15R and (2) NEMA 5020R. f. Shall have a nominal output voltage of 120v. g. Shall have a nominal input voltage of 120v. h. Shall have an input connection NEMA L5-30P i. Shall have a power cord length of at least 8FT. j. Shall have a transfer time of 2-4ms. k. Shall have the following interface ports: RJ-45 Serial, USB. l. Shall have a control panel with LED status display with �on Line�, �on battery�, �replace battery and overload indicators, multi-function LCD status and control console. m. Shall have an emergency power off. n. Shall have full time multi-pole noise filtering, 3, EA; LI 012: 12. Un-interruptible power supply (UPS) external battery pack. Shall be have similar characteristics of the brand �APC External Battery Pack for Smart-UPS Extended Run SMX-Series (2000VA and higher), 48V, 4U Rack/Tower (SMX120BP)� item model number: SMX120BP, ASIN B00DQOAEWG. The minimum requirements for the UPS shall be as follows: a. All 3 shall be the same make and model and be compatible with the UPS identified in line item number 11. b. Shall be rack mountable. c. Shall the capability to replace battery cartridges without dterial, supplies, equipment and qualified personnel to provide on-site diagnostic medical physics support or services for the annual calibration and confirmatory shielding surveys of ionizing radiation producing machines and Nuclear Medicine Gamma Cameras at the Robley Rex VA Medical Center, Louisville, KY, under the terms and conditions stated here in and must adhere to requirements in current applicable US Food and Drug Administration (FDA) ,Code of Federal Regulations (CFR) Title 21 and Mammography Quality Standards Act (MQSA), US Nuclear Regulatory (NRC) Title 10, The Joint Commission (JC) requirements for diagnostic imaging services and VHA requirements as identified in the following publications: VHA Directive 1129, Radiation Protection for Machine Sources of Ionizing Radiation, Issue Date February 5, 2015 VHA Directive 1105, Management of Radioactive Materials, Issue Date February 5, 2015 VHA Directive 1105.04, Fluoroscopy Safety, Issue Date June 21, 2018 The Joint Commission Diagnostic Imaging Requirements, Issued August 10, 2015 https://www.jointcommission.org/assets/1/18/AHC_DiagImagingRpt_MK_20150806.pdf Standards Revisions for Organizations Providing Fluoroscopy Services, Issued June 25, 2018 https://www.jointcommission.org/changes_to_requirements_for_organizations_providing_fluoroscopy_services/ The Contractor shall comply with radiation protection standards in US Department of Labor (DOL), Occupational Safety and Health Administration (OSHA) 29 CFR 1910.1096 and immediately report any unsafe conditions with the potential to adversely impact the facility radiation workers, patients or members of the public to the Radiation Safety Officer (RSO).
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/6d58df19a7ad476698a59140e9170b48/view)
- Place of Performance
- Address: Fort Sill, OK 73503, USA
- Zip Code: 73503
- Country: USA
- Zip Code: 73503
- Record
- SN05691337-F 20200617/200615230216 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |