SOURCES SOUGHT
38 -- Hydraulic Sheet Pile Driver
- Notice Date
- 6/16/2020 5:32:59 AM
- Notice Type
- Sources Sought
- NAICS
- 333120
— Construction Machinery Manufacturing
- Contracting Office
- USDA FOREST SERVICE RHINELANDER WI 54501 USA
- ZIP Code
- 54501
- Solicitation Number
- 12569R20Q0034
- Response Due
- 7/6/2020 12:00:00 PM
- Archive Date
- 07/21/2020
- Point of Contact
- Shawn Lacina, Phone: 7153621347, Brad Cromell, Phone: 7153621332
- E-Mail Address
-
shawn.lacina@usda.gov, bradley.cromell@usda.gov
(shawn.lacina@usda.gov, bradley.cromell@usda.gov)
- Description
- The purpose of the sources sought notice is to determine availability and set-aside options for the purchase and installation of an excavator mounted hydraulic sheet pile driver on a Volvo EC160CL.� Responses to this notice, by the closing date and time, shall include�business name, DUNS number, point of contact, sheet pile driver literature, and availability to perform on-site service.� Responses are to be emailed to shawn.lacina@usda.gov. Sheet Pile Driver Requirements: Excavator Mounted Hydraulic Sheet Pile Driver Installed on a Volvo EC160CL. Excavator PIN: VCEC160CP00120775. Quick Attach Mounting Installation Kit installed on Hydraulic Pile Driver. Pile Driver Configuration: 180 Degree Swivel. Mounting Type: Dedicated Quick Attach. Low Flow Pressure Kit to be installed on machine by seller. Freight to Seller/Installer Included. Must be installed by seller within 150 miles of Laona, WI. Seller must be able to provide on-site service to Laona, WI. Specifications �Minimum of 180� free rotation to allow alignment and positioning of sheet pile without having to reposition the machine. When not needed, the swivel can be locked in place; either parallel or perpendicular to the boom. �Dedicated top mounting brackets designed to OEM bucket specifications to provide a full range of motion for positioning to pick up/remove the sheet from the ground. �Hydraulic cylinder lock for positive pile clamping to prevent slippage. �Rubber shock mounts. �Heavy duty, high efficiency gear motor. �Integrated flow control and pressure relieving valves. �Oil splash lubrication of the compactor bearings. Minimum Impulse Force 16,000 lbf Minimum Chuck Opening 1.5 in Minimum Chuck Oil Flow 3-5 gpm Minimum Chuck Pressure 3045 psi Minimum Cycles Per Minute 2200 Minimum Oil Flow 33 gpm Minimum Operating Pressure 1800-2300 psi Height 48-70 Inches Width 20 � 30 inches
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/860cc2c69f4c420e8ccbbc61f88bd622/view)
- Place of Performance
- Address: Laona, WI, USA
- Country: USA
- Country: USA
- Record
- SN05693292-F 20200618/200616230211 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |