SOLICITATION NOTICE
38 -- Flood Defense Materials
- Notice Date
- 7/23/2020 3:01:40 PM
- Notice Type
- Solicitation
- NAICS
- 423830
— Industrial Machinery and Equipment Merchant Wholesalers
- Contracting Office
- FA4600 55 CONS PKP OFFUTT AFB NE 68113 USA
- ZIP Code
- 68113
- Solicitation Number
- FA4600_Flood_Defense_Materials
- Response Due
- 8/24/2020 9:00:00 AM
- Archive Date
- 09/08/2020
- Point of Contact
- Michael Roybal, Phone: 4022325032, Cody Benjamin, Phone: 4022321452
- E-Mail Address
-
michael.roybal.1@us.af.mil, cody.benjamin.3@us.af.mil
(michael.roybal.1@us.af.mil, cody.benjamin.3@us.af.mil)
- Small Business Set-Aside
- SBA Total Small Business Set-Aside (FAR 19.5)
- Description
- The provided items shall meet or exceed the specifications for the following: 6-24� Inflatable Pipe Plug (24 ea): ����������� Pneumatically inflatable plug for reinforced concrete pipe, capable of withstanding at least 5 psi, or 11.55 feet water-head pressure.� Must fit pipes between 6� and 24� with a single, interchangeable model.� No bypass or flowthrough capability is needed.� Must include fill/monitor air hose(s) and gauge, minimum 20� length. 42� (2 ea) and 72x113� (1 ea) Pipe Plugs: ����������� Pneumatically inflatable plug for reinforced concrete pipe, capable of withstanding at least 6 psi, or 14 feet water-head pressure.� Must fit 42� and 72x113� (elliptical) pipes, and must be specifically sized to each pipe.� No bypass or flowthrough capability is needed.� Must include fill/monitor air hose(s) and gauge, minimum 25� length. Pumps: (37 ea) ����������� Must be centrifugal pump, gasoline powered, with recoil start.� Minimum of 200 GPM at 0� head with 2� inlet/outlet.� Pump must have a roll cage, be rated for at least �� solids in water, and be self-priming.� Mobility kit (ie, wheels) are required, and maximum weight is 110 lbs.� Extended run-time fuel tank is desired (capacity greater than 1 gallon) but not required.� Run-dry capability desired but not required.� No unique chemical or material requirements on pump body, impeller, or seal material.� Inlet and outlet must be equipped with or supplied with cam and groove fittings. Suction Hoses: (37 ea) ����������� Must have cam & groove fittings installed to match pump, and strainer on intake side.� Suction hoses must be between 12 and 20� in length and suitably rated to prevent collapse from pump suction.� Strainer may be ball, basket, or cylindrical with an opening size less than the solids handling capability of the pump.� Strainer may be plastic or metal.� Hose may be fabricated by contractor, IE procured in bulk lengths, cut, and fittings installed by contractor. Discharge Hoses: (74 ea) ����������� Must have cam & groove fittings installed to match pumps and at both ends to allow multiple discharge hoses to be connected with one male and one female end.� Must be a lay-flat type of PVC standard duty hose, 50� length.� Hose may be fabricated by contractor, IE procured in bulk lengths, cut, and fittings installed by contractor. Sandbag Filling Machine: (2 ea) ����������� Must be capable of filling four sandbags simultaneously, with a minimum rating of 1600 bags per hour.� Machine must not rely solely on gravity to move material, and must have a powered auger to move material.� Machine must have at least 2 cubic yard hopper capacity. Sandbag Filling Machine Trailer: (2 ea) Sandbag machine must be paired with a tilt trailer capable of transporting, loading, and unloading the sandbag machine without heavy equipment.� Loading and unloading via winch is acceptable.� Trailer must have DOT lighting, a solid deck (no expanded mesh), and tiedown points for sandbag machine.� Trailer will be used for transportation of sandbags, therefore towable sandbag filling machines will not be considered.� Trailer must be single axle with a total weight less than 5,000 lbs. Foam Duct Sealant (2x 6pk for conduit 2�, 4x applicator guns for kits): ����������� Must be a two-part urethane closed-cell foam, rated to withstand 22 feet of water head pressure continuously.� Must be furnished with all required tools and materials for installation.� If necessary, different kits can be provided for conduit larger than 2� and conduit smaller than 1.5�. Contractor shall provide products that meet or exceed specifications of items above.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/b5525d4d4b3a4d81a77c9ec14b513e54/view)
- Place of Performance
- Address: Offutt AFB, NE 68113, USA
- Zip Code: 68113
- Country: USA
- Zip Code: 68113
- Record
- SN05731493-F 20200725/200723230148 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |