SOLICITATION NOTICE
23 -- Sewer Maintenance Truck
- Notice Date
- 8/4/2020 3:21:34 PM
- Notice Type
- Presolicitation
- NAICS
- 336120
— Heavy Duty Truck Manufacturing
- Contracting Office
- COMMANDING OFFICER FPO AP 96379-5002 USA
- ZIP Code
- 96379-5002
- Solicitation Number
- M67400-20-Q-0114
- Response Due
- 9/2/2020 6:00:00 PM
- Archive Date
- 09/18/2020
- Point of Contact
- Harold Teague, Phone: 01181989708534, Christopher David Weiss, Phone: 01181989707140
- E-Mail Address
-
harold.teague@usmc.mil, christopher.d.weiss1@usmc.mil
(harold.teague@usmc.mil, christopher.d.weiss1@usmc.mil)
- Small Business Set-Aside
- LAS Local Area Set-Aside (FAR 26.2)
- Description
- SEWER MAINTENANCE TRUCK MCB Camp Butler, Okinawa Japan Multi Vacuum Truck Kato Multi Vacuum truck 5 ton Model MV-600S or Equal Vacuum Truck 5 ton, Diesel Engine Drive. All vehicles shall be the newest model and year at the time of delivery and ready for use. Vehicle/Equipment and furnished accessories shall comply with Japanese Motor Vehicle Safety Standards, including, but not limited to, exhaust emission control requirement, in effect on the date of manufacture. MINIMUM # OF VEHICLE REQUIRED & CHARACTERISTICS (1) Quantity: One (1) each.� � (2) MINIMUM DIMENSIONS� (1)� � �Overall length:� � 6710mm� � � � � � � � � � � � � � � (2)� � �Overall width:� � �2350mm� � � � � � � � � � � � � (3)� � �Overall Height:� �2980mm (4)� � �Tank volume:� � �6.3 Cubic meter (5)� � �Vehicle loading capacity: 5.3 Ton (3) Exterior Color:� Manufacturer's standard color yellow. (4) Rust Proofing and Under Coating: Extra anticorrosive from sea water damage. OTHER MISCELLANEOUS REQUIREMENTS (1) Brower: KMS-510 (2) Electric motor type water pump (3) Water tank: Manufacturer's standard 100L or more. (4) Suction valve and Hose size 5 inch. (5) Storage basket: Right (950mm x 350mm x 250mm) Left (440mm x 410mm x 510mm) (6) Suction and discharge hose: 4 inch, 20m, with female cam lock. (7) Rear fender iron (8)� Back View/ Side View Camera with a Color Monitor in the Operator's Cab. (9)� Tire Marker Lamps: Manufacture's standard lamps shall be installed on both sides of wheel house. (1 each x 2 sides). (10)� Fire Extinguisher and Storage Bracket: Shall be installed in the operator's cab. (11) Drive Type: Manufacture's standard (9)� �Accessories: Shall be the type installed on manufacture's standard domestic production model. (10) Warranty: Manufacturer's standard. The warranty work will be provided by dealers in Okinawa area, Japan with Government personnel providing Quality Assurance of all work. All warranty work to include the Manufacturer's warranty term inspections shall be conducted at no cost to the government to include parts, labor and transportation. Any warranty work performed to include warranty term inspections and breakdowns repairs shall be documented in detail to include the repair procedure and the parts installed at no extra cost to the government. (11) Certificate of Transfer (in Japanese): For each vehicle to be furnished for consignee by Contractor at time of vehicle(s) delivery. (12) Technical Publications (in Japanese):� one (1) sets of operator's manuals (In Japanese), one (1) sets of Technical (shop repair) manuals and parts catalog (In Japanese)� to be furnished upon delivery by Contractor (Japanese operator's manuals, technical manuals and parts catalog must be delivered to government at least 60 days before delivery of the truck). (13) SAFETY. Each piece of equipment installed on the Sweeper shall comply with Japanese Industrial Standard safety requirements.� G.� � � DELIVERY POINT:� All transportation charges borne by the contractor to; Okinawa-ken, Nakagami-gun, Chatan-cho, Zukeran, Camp Foster Bldg. No.: 5832 Commanding General (DODAAC M67400) Marine Corps Base butler (code G-4/GME) Ship to mark for:� G-4/GME, Unit 35001 BLDG #5832 � � � � � � � � � � � � � � � �POC: Joseph Vilailack � � � � � � � � � � � � � � � �COMM: 098-970-3778 � � � � � � � � � � �EMAIL:�joseph.vilailack@usmc.mil H.� � � DELIVERY DATE:� The vehicle shall be delivered at the delivery point specified above within 240 days from the date of contract. I.� � � INSPECTION AND ACCEPTANCE:� Final inspection and acceptance of the vehicle furnished hereunder will be made on Standard Form 1449, block 32a through 41c, by the receiving officer or his authorized representative at the time and place of delivery as specified.
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/08261ee13f624ffcae647ce2bc949481/view)
- Record
- SN05744583-F 20200806/200804230149 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |