SOLICITATION NOTICE
A -- Mechanical Ground Support Equipment
- Notice Date
- 8/5/2020 11:17:14 AM
- Notice Type
- Presolicitation
- NAICS
- 541715
— Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- Contracting Office
- NASA MARSHALL SPACE FLIGHT CENTER HUNTSVILLE AL 35812 USA
- ZIP Code
- 35812
- Solicitation Number
- 4200739319
- Response Due
- 8/19/2020 12:00:00 AM
- Archive Date
- 09/03/2020
- Point of Contact
- Shawn Craddock, Phone: 256-961-7308, Christopher Ragucci, Phone: 2569619136
- E-Mail Address
-
shawn.m.craddock@nasa.gov, christopher.m.ragucci@nasa.gov
(shawn.m.craddock@nasa.gov, christopher.m.ragucci@nasa.gov)
- Description
- NASA/Marshall Space Flight Center (MSFC) has a requirement for the engineering, procurement, fabrication and testing of mechanical ground support equipment (MGSE) to support the European Space Agency�s (ESA�s) Advanced Telescope for High Energy Astrophysics (ATHENA) mirror. NASA/MSFC intends to issue a sole source contract to Moog CSA Engineering. This effort includes the design, fabrication, shipment, installation and verification of specialized MGSE to support the ATHENA mirror testing in the XRCF.� Specifically, it includes: �Re-Purposing� the previously supplied Center-of Curvature Optical Bench (CoCOB) Hexapod used as part of the James Webb Space Telescope optical metrology system to provide high precision positioning control in 6-degrees of freedom (DOF) meeting the testing, functional and interface requirements for the ATHENA mirror assemblies Design, fabrication, and integration of a new vacuum-compatible 2-DOF translation stage/transporter below the CoCOB Hexapod for course alignment / positioning Re-purposing the current CoCOB Hexapod, drive electronics, and control software to provide fine alignment / positioning, which includes replacement of the upper deck,� removing the lower deck, and directly attaching the new 2-DOF translation stage / transporter to the hexapod Design and fabrication of the support structure which integrates the ATHENA Mirror Assembly Common Support Ring structure (provided by ESA) with the modified CoCOB Hexapod upper deck Fabrication, testing, and commissioning of an integrated vacuum-compatible 6-DOF hexapod and 3-DOF translation / manipulator� stage for the CCD Camera Manipulator system used as part of the XRCF optical metrology system. Maintaining the CoCOB Hexapod�s traceable positioning accuracy / resolution performance by ensuring the CoCOB Hexapod will be positioned geometrically centered under the ATHENA Mirror Support Ring Providing system integration support and commissioning of these positioning systems within the XRCF environmental chamber to support X-ray optical testing of the ATHENA Mirror Assembly test articles. Providing a common user interface for the Mirror and CCD Camera Manipulator MGSE to support integrated control of the two MGSE systems
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/5fc11e44e681476390ed2b0bb13973d1/view)
- Place of Performance
- Address: CA, USA
- Country: USA
- Country: USA
- Record
- SN05745749-F 20200807/200805230153 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |