SAMDaily.us | PRESOL | 30 | Brake Shoe

SAMDAILY.US - ISSUE OF AUGUST 29, 2020 SAM #6848
SOLICITATION NOTICE

30 -- Brake Shoe

Notice Date: 8/27/2020 3:37:47 AM
Notice Type: Presolicitation
NAICS: 333613 — Mechanical Power Transmission Equipment Manufacturing
Contracting Office: DLA LAND AND MARITIME COLUMBUS OH 43218-3990 USA
ZIP Code: 43218-3990
Solicitation Number: SPE7MX-20-R-0141
Response Due: 9/11/2020 8:59:00 PM
Archive Date: 09/26/2020
Point of Contact: Robert Varcho, Phone: 614-692-1372
E-Mail Address: robert.varcho@dla.mil
(robert.varcho@dla.mil)
Description: One (1) National Stock Number with Estimated Annual Demand Quantity (ADQ): 3040-01-576-5056 Brake Shoe�� ADQ: 966 Unit of Issue: EA Destination Information: Various DLA Stocking Locations NAICS Code: 333613 Mechanical Power Transmission Equipment Manufacturing; small business size standard is 750 employees. This acquisition is for supplies for which the Government does not possess complete, unrestrictive technical data; therefore, the Government intends to solicit and contract with only approved sources under the authority of 10 U.S.C. 2304(c)(1). Dealers will be required to submit traceability documentation back to the approved source. Freight on Board (F.O.B.) will be at Origin and Inspection/Acceptance will be at Destination. The proposed procurement will be a Long Term Contract (LTC), and will be for a total of five (5) years, to consist of three (3) base years and two (2) option years. The option years may be exercised at the discretion of the Government. Based upon market research, the Government is using the policies contained in FAR Part 15 � Contracting by Negotiation in its solicitation for the described supplies. This will be solicited as Unrestricted. The solicitation will be available at https://www.dibbs.bsm.dla.mil/rfp/default.aspx on or about its estimated issue date of September 14, 2020. Specifications, plans or drawings are not available. RESPONSE DATE: Offers/Responses will be due prior to the closing date and time specified in Block 8 (Offer Due Date/Local Time) on Page 1 of Standard Form 33 (Solicitation, Offer and Award). All responsible sources may submit an offer/proposal, which shall be considered. While price may be a significant factor in the evaluation of offers, the final award decision will be based upon a combination of price, delivery, past performance, and other evaluation factors, as described in the solicitation. One or more of the items under this acquisition may be subject to an Agreement on Government Procurement approved and implemented in the United States by the Trade Agreements Act of 1979. All offers shall be in the English language and in U.S. dollars. All interested suppliers may submit an offer. Notice:� This solicitation contains DLAD Procurement Note L09 for Reverse Auction (RA). The Government reserves the right to activate this provision after timely offers have been received and evaluated. Procurement Item Description (PID), Packaging and Marking Text: - *** LTC PID Packaging Consolidated Text *** - PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN. CLIN 0001: NSN: 3040-01-576-5056 �� BRAKE SHOE. ��REFERENCE NUMBER:RP001 �� REFERENCE NUMBER:RQ032 �� REFERENCE NUMBER:RA001 �� REFERENCE NUMBER:RQ011 �� REFERENCE NUMBER:RD002 �� REFERENCE NUMBER:RQ002 �� REFERENCE NUMBER:ZD025 �� REFERENCE NUMBER:CS120 �� Farin Industries Inc 3XYN6 P/N 75A �� INDUSTRIAL CLUTCH & BRAKE, INC. 1FA43 P/N 7664298 �� IAW BASIC DRAWING NR 53711 7664298 �� REVISION NR�� DTD 03/01/2009 �� PART PIECE NUMBER: �� PREP FOR DELIVERY �� LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS �� PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999 �� QUP:001� PRES MTHD:31� CLNG/DRY:1� PRESV MAT:00 �� WRAP MAT:00� CUSH/DUNN MAT:00� CUSH/DUNN THKNESS:0 �� UNIT CONT:E6� OPI:O �� INTRMDTE CONT:E5� INTRMDTE CONT QTY:AAA �� PACK CODE:U �� MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. �� SPECIAL MARKING CODE:00 -00 No special marking PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008 ************************************************************************************ GLOSSARY ************************************************************************************ PACKAGING TEXT THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT: ITEM DESCRIPTION TEXT �� REFERENCE NUMBER RP001 �� RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT �� REFERENCE NUMBER RQ032 �� RQ032: EXPORT CONTROL OF TECHNICAL DATA This item has technical data some or all of which is subject to Export Control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data. The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the�export-controlled data. Instructions for obtaining access to the export-controlled data can be found at: �� https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/ To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access�export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data. �� REFERENCE NUMBER RA001 RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: �� http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx �� FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE�SOLICITATION ISSUE DATE OR� � �THE AWARD DATE CONTROLS.� FOR LARGE�ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP� ISSUE DATE�APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON�REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. �� REFERENCE NUMBER RQ011 � � �RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES �� REFERENCE NUMBER RD002 �� RD002, COVERED DEFENSE INFORMATION APPLIES �� REFERENCE NUMBER RQ002 � � �RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE� � � � (DEVIATION OR WAIVER) �� REFERENCE NUMBER ZD025 � � �MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO, OR COME IN� � �DIRECT CONTACT WITH, ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY � � �USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). �� REFERENCE NUMBER CS120 NOTE:� THE CITED DRAWING IS A SOURCE CONTROLLED DRAWING AND AS OF THE DATE OF THIS SOLICITATION ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE�BEEN APPROVED.� EVEN THOUGH SOURCES AND APPROVED PART NUMBERS ARE PROVIDED, THE ITEMS FURNISHED MUST MEET THE REQUIREMENTS OF THE�CITED DRAWING.� OFFERORS WHO ARE INTERESTED IN QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE ACQUISITION MUST CONTACT THE COGNIZANT DESIGN ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED DRAWING. ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT THIS TIME. ��
Web Link: SAM.gov Permalink
(https://beta.sam.gov/opp/1058d68f07d44728962a00763260fbfb/view)
Place of Performance: Address: USA; Country: USA
Record: SN05776252-F 20200829/200827230208 (samdaily.us)
Source: SAM.gov Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's SAM Daily Index Page |

Loren Data's SAM Daily™

30 -- Brake Shoe