SOURCES SOUGHT
34 -- CNC EDM Drill
- Notice Date
- 8/27/2020 10:52:43 AM
- Notice Type
- Sources Sought
- NAICS
- 333517
— Machine Tool Manufacturing
- Contracting Office
- W6QK ACC-APG ADELPHI ADELPHI MD 20783-1197 USA
- ZIP Code
- 20783-1197
- Solicitation Number
- W911QX20Q0229
- Response Due
- 9/1/2020 8:59:00 AM
- Archive Date
- 09/16/2020
- Point of Contact
- Crystal L. Demby, Phone: 3013945332
- E-Mail Address
-
crystal.l.demby.civ@mail.mil
(crystal.l.demby.civ@mail.mil)
- Description
- (1) Action Code�:���� SOURCES SOUGHT This is a Sources Sought Notice only. This is not a request for proposal, but a survey to locate potential sources.� This Sources Sought does not constitute an Invitation for Bids, Request for Proposals, or a Request for Quotations, and is not to be construed as a commitment by the Government to issue an order or otherwise pay for the information solicited, nor is it a guarantee of a forthcoming solicitation or contract. It is for market research purposes only. Respondents will not be notified of the results of the evaluation. The purpose of this Sources Sought Notice is to gain knowledge of interest, capabilities, and qualifications of various members of industry, to include the Small Business Community: Small Business, Section 8(a), Historically Underutilized Business Zones (HUB-Zone), Service-Disabled Veteran-Owned Small Business (SDVOSB), Women-Owned Small Business (WOSB), and Economically Disadvantaged Women-Owned Small Business (EDWOSB). The Government must ensure there is adequate competition among the potential pool of responsible contractors. Small business, Section 8(a), HUBZone, SDVOSB, WOSB, & EDWOSB businesses are highly encouraged to participate. (2) Date�: 08/27/2020����������������� (3) Classification Code�: 34��������� (4) NAICS Code�: 333517����������� (5) NAICS Size Standard: 500 Employees (6) Contracting Office Address: 2800 Powder Mill Road ������ Bldg. 601 ������ Adelphi, Maryland 20783 (7) Subject:� Sources Sought for one (1) Fast Hole Computer Numerical Control (CNC) Electrical Discharge Machine (EDM) Drill (8) Proposed Solicitation Number:� W911QX20Q0229 (9) Sources Sought Closing Response Date: 01 September 2020 (10) Contact Point: Contract Specialist, 301-394-5332, crystal.l.demby.civ@mail.mil (11) Contract Line Item Number (CLIN) 0001: The Contractor shall deliver one (1) Fast Hole Computer Numerical Control (CNC) Electrical Discharge Machine (EDM) Drill that meets the following minimum specifications: Shall have a four (4) -Axis Computer Numerical Control (CNC) operation to enhance machining capability and productivity Shall have a glass scale feedback on X/Y Axis for accurate positioning Shall have a partial submerged operation (bottom 25 millimeter (mm) / one (1) inch of work piece is submerged to provide faster and more stable break-thru machine operation) Shall have full function water reservoir with common wire Electrical Discharge Machine (EDM) type filtration that contains dedicated pumps for filtration and work tank filling Shall have di-ionization systems and contain dedicated pumps for filtration and work tank filling Shall have a user-friendly fifteen (15) inch touch screen interface with Windows operating system Shall have flexible control handbox design for convenient operator functionality Shall have convenient can-cycle setup functions and multiple Work Coordinate Systems Shall have preset power settings library Shall have two (2) Analog Gauges on the Control that display Voltage and Amperage Shall have a real-time program location display and program simulation Shall have a flexible programming function which allows use of EDM Numerical Control (NC) program to automatically read Wire thread point locations to determine hole locations Shall have the ability to import and program direct from Drawing Interchange Format (DXF) Computer Aided Design (CAD) file Shall have a Universal Serial Bus (USB) Port for import and export of data Shall have electrode depth compensation function Shall have a maximum X, Y Axis Travel of 13.78 inches x 9.84 inches Shall have a maximum Z Axis Travel of 13.78 inches Shall have a maximum W Axis Travel of 7.87 inches Shall have a C Axis with 200 Revolutions Per Minute (RPM) Shall have a maximum Work Table Size of 23.62 inches x 11.81 inches Shall have a maximum Work Tank Size of 32.68 inches x 17.32 inches Shall have a maximum Work Height of 13.00 inches Shall have a minimum Work Weight of 551 pounds (lbs.) Shall have an Electrode Diameter Range of a minimum of 0.004 inches to a maximum of 0.118 inches Shall have Electrode Material Type Brass or Copper Shall have a minimum Machine Weight of 1,764 pounds (lbs.) Shall have maximum Machine Dimensions of 47.1 inch x 73.6 inch x 82.9 inch Shall have a Power Supply Current of 32 amplifiers (Amps) Shall have a Power Capacity of 3.8 kilovolt-ampere (kVA) Shall have a Power Input of 3-Phase / 60 Hertz (Hz) / 220 Volts (V) � 5 percent (%) C. Responses: � All interested parties should notify this office in writing, mail, fax, or e-mail within the posted date.� Responses shall include: To what extent each of the specifications can be met. � �Include your type of business (i.e. commercial, academia), whether your organization is classified as a large or small business based on the 500 Employee standard that accompanies NAICS code 333517. If a small business, you must also list any small disadvantaged status you hold [HUBZone, 8(a), Service Disabled Veteran Owned Small Business (SDVOSB), Women Owned Small Business (WOSB), Economically Disadvantaged Women-Owned Small Business (EDWOSB), etc.]. � Past experience/ performance through the description of completed projects. � (12) Responses to this sources sought are due no later than 11:59AM Eastern Standard Time (EST) on 01 September 2020. Submissions should be emailed to Crystal Demby, crystal.l.demby.civ@mail.mil. � Questions concerning this sources sought may be directed to Crystal Demby at crystal.l.demby.civ@mail.mil. Please be advised that .zip and .exe files cannot be accepted. � �(13) Place of Contract Performance: Army Research Laboratory ���� Aberdeen Proving Ground, MD 21005-5066 ������������������� (14) Estimated Delivery Timeframe or Period of Performance: Six (6) weeks After Date of Contract (ADC).
- Web Link
-
SAM.gov Permalink
(https://beta.sam.gov/opp/43e9eb5d0b3d4b1dbe2b98950b8e955f/view)
- Place of Performance
- Address: Aberdeen Proving Ground, MD 21005, USA
- Zip Code: 21005
- Country: USA
- Zip Code: 21005
- Record
- SN05776922-F 20200829/200827230213 (samdaily.us)
- Source
-
SAM.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's SAM Daily Index Page |